30 Ton Cooling Tower

Closed Circular Cross Flow Cooling Tower(AHC)

It refers to a cooling tower in which the cooling hot water passes through the packing from top to bottom, while the air flows through the packing from horizontal and oblique directions, and the flow direction of hot water and the air is nearly 90 degrees (some manufacturers also call it direct cooling tower).

Features Of Closed Circular Cross Flow Cooling Tower

a. Crossflow cooling mode is adopted, and the bleaching rate is very low;

b. The internal space of closed circular cross flow type cooling tower is large and the maintenance is very convenient;

c. Totally closed circulation to eliminate the blockage caused by sundries;

d. The heat exchanger adopts the stacking mode of building blocks, which can be installed and disassembled layer by layer;

e. The closed type cooling tower using hot water circulation, no scale formation;

f. This wet and dry cooling tower does not need a pool, occupies a small area, and is easy to locate.

Structural Drawing Of Closed Cross Flow Cooling Tower

Application Scope Of Closed Circular Cross Flow Cooling Tower

The closed circular cross flow cooling tower fan adopts a silent large blade fan, which makes the noise at the outlet of the cooling tower lower. The gravity pool type water distribution is adopted. The spray water enters into the basin and then passes through the nozzle under the action of gravity. The heat exchange filler under the spray and the heat exchanger of the closed cooling tower. After passing through the heat exchanger, it naturally flows into the bottom sump. Therefore, the noise of a closed circular cross flow cooling tower is lower than that of a closed counter flow cooling tower. There was no sound of water dripping into the pan. Compared with the counter flow cooling tower, the closed circular cross flow cooling tower can be assembled side by side, which has a smaller floor area. Therefore, the cross-flow closed cooling tower is more suitable for occasions with high noise requirements and a small floor area.

Closed Circular Counter Flow Cooling Tower(AFC)

A closed circular counter flow cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water, and circulating water heat exchange to ensure the cooling effect. It can be used for medium frequency power cooling, mechanical water jacket cooling, water source heat pump group, air compressor cooling.

Details Of Closed Circular Counter Flow Cooling Tower

Fan

The ventilation system uses the cooling tower special aluminum axial flow fan, with anteverted design wind blade, streamlined inlet blowdryer;

advantages: low wind resistance, large blast capacity, low noise, good performance, high efficiency. Use closed low noise cooling tower motor;

advantages: small volume,lightweight,excellent performance,durable.

High Efficient Drift Eliminator

Made of PVC,the saturated wet hot air meets the drift eliminator, congeal to water drops and slip to the water collector,it can effectively reduce the fluttering of water,saving water.

Cooler

AOSUA cooling coiled pipe's design ensures high cooling efficiency. the design of the double pipe make the pipe with a compact arrangement, reduces the flow resistance of the air at the same time. This design also increases the water-loading, and effectively uses the coiled pipe. According to the material, it can be divided into two types: SUS304 condensing coiled pipe and red copper condenser coiled pipe.

Air Intake Grill

AOSUA's air-inlet grille is made by adopting corrosion resistance PVC, its function is to prevent dust and dirt to enter the unit, avoid direct sunlight and splash water, reduce a part of the algae forming, and easy to clean the sink.

Circulation System

Use a closed cooling tower pump with a big flow, low lift, high efficiency, low noise, low power. The water tank is made of 304 stainless steel.

Round Counter Flow High Temperature Resistant Cooling Tower(GAB)

The filler of round counter flow high-temperature resistant cooling tower is made of PP material, which is suitable for various high-temperature industries, such as steel smelting, casting and forging, paper making, plastic production, cement production, etc. the maximum applicable temperature can reach 120 ℃, and the maximum temperature drop can reach 60 ℃.

As a professional cooling tower manufacturer, we provide 30 tr cooling tower, china cooling tower, cooling tower spare parts and etc. Contact us to know more.