POSITION - 7964 Anuncios

Martes 24 octubre 2017

Safety Mode-All cows can go in and out freely. One or more cows can be released using latch. One or more cows can be retained by pegging. Quick release and down cow from lower position. Yoke bar automatically returns to open position. Fully adjustable feed spare. Rubber coated latches...

Miércoles 18 octubre 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Miércoles 18 octubre 2017

Brief Introduction. Advantages. 1.Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency. 2.When steam pressure changes, the ball float can adjust the opening of valve seat without influence, and so it is stable. 3.With automatic...

Miércoles 18 octubre 2017

Introduction: 1.In low lift valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower than those of full or high lift valves...

Miércoles 18 octubre 2017

Introduction Impulse safety valve is used for power plant boilers, pressure containers, pressure and temperature reducing device and other facilities. It serves to prevent the pressure exceeding the highest allowable pressure value and ensure the safety of the device when working...

Miércoles 18 octubre 2017

Introduction of low lift safety valve 1.In low lift safety valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower...

Martes 17 octubre 2017

Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge. Standards compliant: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009...

Martes 10 octubre 2017

Brief Introduction: Rubber elasticity tester, Rubber strikes the resilience elasticity tester for testing vulcanized rubber, experiments, moving iron bars, iron bars so that the end position in the scale of 100, and then the iron bar to fall freely read the fourth, five or six times...

Sábado 30 septiembre 2017

Product Description Product Introduction Rotary transfer machines are ideal for even larger quantities and more complicated parts than those produced on multi-spindles. Rotary transfer machines are used to produce turned parts which require many operations such as cross drilling...

Sábado 23 septiembre 2017

Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge. Standards compliant: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009...

Sábado 23 septiembre 2017

Brief Introduction: Rubber elasticity tester, Rubber strikes the resilience elasticity tester for testing vulcanized rubber, experiments, moving iron bars, iron bars so that the end position in the scale of 100, and then the iron bar to fall freely read the fourth, five or six times...

Sábado 16 septiembre 2017

Compost Windrow Turners Reliable, efficient, economical, low-maintenance, and long lasting. Extra-hardened, replaceable steel blades are uniquely positioned on the drum to allow for complete blending right to the base of the windrow. Material from the outside is brought inward and...

Jueves 14 septiembre 2017

Description 1. The WC67K NC Hydraulic Press Brake-E21 design meets EU international standards. The fuselage eliminates internal stress by annealing and ensures higher precision and strength. All NC hydraulic plate bending machines are designed using SOLID WORKS 3D programming and...

Jueves 14 septiembre 2017

Description 1. The design meets EU international standards.The fuselage eliminates internal stress by annealing and ensures higher precision and strength All machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology...

Jueves 14 septiembre 2017

Yarn Length Measurement Meter Standards： FZ/T 70001-2003，FZ/T 71004-2003 Scope: Used for measuring the cycle length of a variety of knitting wool, knitting wool circle. For checking that if the length of various linear density (count) hank girth compliance with standards. Product details...

Jueves 14 septiembre 2017

- Digital Sock Stretch Tester - Applications: Digital socks stretching instrument used for the determination of the value of performance testing on extending straight pantyhose, stockings, athletic, swimsuit, knitted pants and laterally extending value, also the dedicated instrument...

Jueves 14 septiembre 2017

Fabric Circular Sample Cutter Application Scope: For sampling a variety of fabrics, paper and non-woven materials such as quasi-circular sample, which can be cut circular sample all kinds of wool, cotton, chemical fiber, knitting fabric. Used in the textile, paper, packaging, testing...

Martes 12 septiembre 2017

Cantidad : 999 piece - Precio : USD 666/piece

ABB PFBK162 Name: Addy Lee mailbox: addy@nseauto.com phone: 0086 18050035546 QQ: 1920412918 Skype: 8618050035546 WhatsApp: 18050035546 N.S.E.Automation is a leading global industrial supplier in China.We specialize in control systems and drives with many years. Advantage Brands: ---Invensys...

Martes 12 septiembre 2017

000mm2 can be testedon this unit. Additional sizes are available on request. The tile is mounted on a rigid steel sample plate with raised edge guides, readings are taken at each corner. An optional data recorder(TTG: DTA) is available, which calculates mean values of readings. Testing method...

Martes 12 septiembre 2017

Precision Fiber Microtome Testing Standards: ASTM D2130, BS 2043, DIN 53811, ISO 137, IWSTM 24, IWTO 8-6 Applications: Precision Fiber Microtome is used to produce accurate cross-sectional specimens of fibre for further examination under a microscope. Fiber cross sections of varying...

Viernes 08 septiembre 2017

Cantidad : 999 piece - Precio : USD 666/piece

GE DS3800HPCA1F1E Name: Addy Lee mail: addy@nseauto.com phone: 0086 18050035546 QQ: 1920412918 Skype: 8618050035546 WhatsApp: 18050035546 N.S.E.Automation is a leading global industrial supplier in China.We specialize in control systems and drives with many years. Our company is located...

Miércoles 06 septiembre 2017

Seam Fatigue Tester Testing Standards Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Applications: The Seam Fatigue Tester is a two station bench top machine, used for evaluating fabric or leather seating materials resistance to...

Miércoles 06 septiembre 2017

Footwear Flection Tester Standards: Satra TM92 & 77 Applications： The Footwear Flection Tester is designed to assess the flexing endurance of completed footwear in wet and dry conditions. Product information： The Footwear Flection Tester is supplied in both single or twin station...

Miércoles 06 septiembre 2017

MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics. Product Information: Fabric...

Miércoles 06 septiembre 2017

Thermal resistance wet resistance tester Testing Standards: GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates the heat and mass transfer processes which occur next to human skin. Measurement of thermal resistance...

Martes 05 septiembre 2017

Product Model: PTFE hose paste making extruder machine Flow Chart Paster Extrusion tube process: PTFE Fine Powder raw material→Sifting→Mix with solvent→Heating→Preforming→Extrusion→Sin tering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine...

Martes 05 septiembre 2017

Vertical & Horizontal Flame Test is a plastics flammability standard released by Underwriters Laboratories of the USA. The UL-94 standard classifies plastics according to how they burn in various orientations and thicknesses. Horizontal Flame Tests： UL-94-HB: slow burning on a...

Martes 05 septiembre 2017

Introduction The electric tracking index test is performed on a surface of a solid insulating material by applying a voltage to a platinum electrode of a predetermined size (2 mm x 5 mm) and dropping a predetermined volume of conductive liquid (0.1% NH 4 Cl) at a predetermined height...

Martes 05 septiembre 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...

Martes 05 septiembre 2017

A six station Colorfastness/Rubbing Tester used to determine crocking, color transfer, and abrasion resistance of leather, fabric, vinyl, stitched seams, plastics and other materials. Each station is equipped with a removable rub head and set of table clamps to facilitate up to six...