Bimetallic steam trap
Specifications.
Pressure Rating: 1.6- 4.0Mpa
Specification: Screwed: DN15-50, Flanged: DN15-50
Material: cast steel
Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP
Performance / Advantages:
Adopt imported material as its hot sensitive element, and so it is high sensitivity and longtime useful life.
There is condensation water in front of valve for forming water-seal, no fresh steam leakage.
Good exhaust, water hammer resistance and can be installed at any angle.
Application:
Mainly used for the steam pipe and overheating pipe, clear away the releasing temperature of condensation water automatically with
good saving energy.
Working Principle:
By the deformation of bimetallic strip caused by the change of temperature, drive the valve plug for opening and closing the valve seat hole, realizing stopping steam and drain.
Main Basis for Type Selection:
Condensation water loading (discharge)kg/h (select the multiplying power 2-3 times).
Maximum working pressure Mpa
Operation pressure differential
Valve material and nominal pressure
Connection mode and dimension
Use and Maintenance:
Confirm the valve material, pressure and check if the maximum is suitable for operation condition.
Before installation, clean the pipeline and clear away sundries.
The installation position shall be closed to heating equipment as much as possible.
Install the minimum point of pipe horizontally and the direction of flow should be the same to the label of valve.
Install steam trap for each heating equipment in case cause influence each other.
under the safe operation of system, open the valve in front of the steam trap, make it rise up to normal station slowly.
Do time-based maintenance for the normal working of steam trap.
Persona a contactar : Yoki Lee, 86 577 57781017
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Bimetallic steam trap Buscar en la categoria : Bienes de equipo Buscar en la categoria : steam, bimetallic, trap |
Jueves 12 diciembre 2024
Nous sommes les principaux fournisseurs de boissons énergisantes comme Red Bull, requin, chargeur et bien d'autres.Nous pouvons également fournisseur can boissons comme Pepsi, Coca cola, Fanta, Sprite et autres produits.Nous fournissons également la meilleure qualité de l'eau minérale...
Vente en Gros
- 40400 - Kuala Lumpur
- +60 1 46 26 71 59
- +60 1 42 85 90 62
Sábado 14 septiembre 2013
Cantidad : 5000 Piece - Precio : USD 1---99
BCT Wound Dressing WaterProof can provide the best wound recovery environment because of 1: ActivatedCarbon MicrobialControl 2: Accelerate wound condition 5times recovery 3: ActivatedCarbon Deodorization characteristic 4: Water Proof Design 5: Waterproof Bandage Component: 1...
Bio-Medical Carbon Technology Co., Ltd
- 40755 - Tainan
- +886 4 2355 4588
Domingo 06 octubre 2013
Cantidad : 1 set - Precio : USD125,000
Product parameters: Parameters EW4700-S12-P10 (Complete Vehicle) Chassis Brand Foton Aumak External 8310mm x 2175mm x 3750mm Power Cummins Curb weight 3700KGS Emission standards Euro IV Total Weight 14495KGS Seat One and half row A 1995 Wheelbase 4700mm Hydraulic Lifting...
Shanghai Jingxiang Advertisement Communication Co.,Ltd
- Lillian123
- 201900021 - Shanghai
- 008618001970686