QSFP - 110 Anuncios

Miércoles 28 junio 2023

The DAC high-speed cable is a fixed-length cable assembly with fixed connectors at both ends. The connectors of dac wire have no optical lasers and other components. So direct attach cable can only transmit electrical signals, but not optical signals. dac direct attach cable is a...

Miércoles 28 junio 2023

AOC refers to Active Optical Fiber which requires optical transceiver devices to convert electrical signals into optical signals, or convert optical signals into electrical signals. AOC cables have the advantages such as high rate, long transmission distance, low consumption, and convenient...

Miércoles 28 junio 2023

40G optical transceiver is packaged in sfp+ qsfp+. 40g qsfp+ transceiver has four independent full-duplex transmission and reception channels, and the transmission rate of 40G can be realized at the same time. china 40g qsfp+ transceiver can provide high-speed, high-density, low-power...

Miércoles 28 junio 2023

With the explosive growth of network traffic, 400G optical transceiver will undoubtedly be the dominant rate in the following market. The current 400G optical module does not have a particularly perfect solution, 400g qsfp dd transceiver is constantly optimized. And QSFP-DD is currently...

Miércoles 28 junio 2023

25g sfp28 transceiver has a transmission rate of 25Gbps, which is mainly used for the interconnection of data center servers and switches. The best input/output (I/O) performance and fiber capacity are 2.5 times than 10G Ethernet, and the port has higher density, which can effectively...

Miércoles 28 junio 2023

100G optical transceiver has a transmission rate of 100Gbps, packaged in QSFP28. 100g transceiver has 4 independent optical signal transmission and reception channels, and the transmission rate of each channel is 25G. With the development of the optical industry centered on "100G...

Miércoles 28 junio 2023

Gearlink Technology has been focusing on developing and manufacturing high speed optical fiber module and cable module transceivers including 400G QSFP-DD / 200G QSFP56 / 100G QSFP28 / 40G QSFP + / 25GSFP28 / 10GSFP + / 1 . 25G SFP / AOC / DAC since established. The optical transmitter...

Miércoles 31 mayo 2023

Precio : 8 000,00 €

Prototype Ready IP S2C offers the largest library of off-the-shelf interfaces and accessories for FPGA prototyping, referred to as Prototype Ready IP, also known as daughter boards. These daughter boards are ready-to-use interfaces and accessories that seamlessly integrate with Prodigy...

Martes 23 mayo 2023

Cantidad : 100 - Precio : USD100-100000

Designed for 100G Ethernet and OTN OTU4 links over duplex single-mode fibers, the Sintai 100g cfp2 transceiver support transmission distance up to 10km using LWDM wavelengths (1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm). 100G CFP2 Single Mode Transceiver Feature Adopt CFP2 hot-swappable...

Martes 23 mayo 2023

Cantidad : 100 - Precio : USD100-100000

Designed for 100G Ethernet links over multiple multimode fibers, the Sintai 100G CFP2 100GBASE-SR10 optical transceivers support transmission distance up to 400m using 850nm wavelength. 100G CFP2 Multimode Transceiver Feature Adopt CFP2 hot-swappable encapsulation with MPO/MTP interface...

Martes 23 mayo 2023

Cantidad : 100 - Precio : USD100-100000

Based on the existing service requirements and in face of the future network development, SINTAI first developed the optical transmission network system, which creatively extends fiber transport ability based on the WDM technology and provides a reliable, flexible, and efficient high...

Sábado 29 abril 2023

SFP28 Direct Attach Cables (25G DAC ) are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m). The SFP28 passive direct attach copper cable assemblies are high-performance...

Viernes 31 marzo 2023

As one of the specialized gpon suppliers, gpon vendors and gpon manufacturers, the GPON provided by Primus IT has three advantages: the first transmission distance is longer, the use of optical fiber transmission, the coverage radius of the access layer can reach 20 kilometres;...

Viernes 31 marzo 2023

The non-light source network is a point-to-multipoint optical fiber transmission and access technology. The downlink adopts broadcast mode and the uplink adopts time division multiple access. It can flexibly form trees, stars, bus and other topological structures. Only need to install...

Viernes 31 marzo 2023

40G DAC/AOC Cable With the widespread application of 40G networks, QSFP+DAC and AOC are essential components in 40G networks. It is an ideal short-distance connection solution that replaces optical modules. It has the advantages of low price and convenient use, which can help customers...

Viernes 31 marzo 2023

AOC/DAC Wholesale There are mainly three types of DAC/AOC: Passive copper cable, active copper cable and active optical cable. AOC is composed of integrated optoelectronic devices, which is used for high-speed and high-reliability transmission equipment between data centers and other equipment...

Viernes 31 marzo 2023

QSFP 50G 50G optical modules are mainly used for intermediate transmission and backhaul in 5G networks. Backhaul in 5G covers the metro access layer, convergence layer and core layer. The metro access layer mainly uses 25G, 50G, 100G and other colour optical modules, while the convergence...

Sábado 25 febrero 2023

With the rapid development of optical communication technology, optical transceiver have gradually evolved from the larger GBIC modules to SFP + optical transceiver modules that support 10G rates, QSFP + optical transceiver modules that support 40G rates, and CFP optical modules and...

Miércoles 22 febrero 2023

1. What is fiber optical transceiver The100g optical transceiver is an optoelectronic device that performs electro-optical and photoelectric conversion. The fiber optical transceiver is a carrier, acting as the transmitting end to convert electrical signals into optical signals, and...

Miércoles 22 febrero 2023

Direct cable is an ideal short-distance connection solution to replace optical transceivers. It can be divided into two categories: high-speed cable (DAC AOC) and active optical cable (AOC). With cheap price, easy use and other advantages, it has been widely concerned by people...

Miércoles 22 febrero 2023

40G/100G AOC active optical cable has been globally introduced throughout the aoc data center field. Compared to 40G DAC copper cable, 40G AOC active optical cable has unparalleled advantages in data transmission environment above 7 meters, including the smaller size, lighter weight...

Miércoles 22 febrero 2023

T&S is an expert in manufacturing Wavelength Division Multiplexing (WDM). Our WDM fiber optic products are relied upon by some of the large scale telecom projects worldwide. We have been providing WDM multiplexers for nearly two decades. With deep understanding and technical know-how of WDM...

Lunes 30 enero 2023

In the 40G network transmission application, the QSFP+ 40G optical module occupies a position that cannot be ignored. According to different needs, it is applied in different transmission scenarios. Primus IT supplies a variety of cost-effective and practical 40G QSFP+ optical modules...

Lunes 30 enero 2023

Symmetrical mode: That is, the uplink and downlink rates are both 10G. The asymmetric mode can be considered as a transitional form of the symmetric mode. In the early stage where the upstream bandwidth demand is less and the cost is more sensitive, the asymmetric mode can be used...

Lunes 30 enero 2023

The asymmetric system only has a downlink rate of 10.3125 Gbit/s, while the uplink rate is still 1.25 Gbit/s. As the first mature next-generation PON technology, 10g epon technology is in line with network development trends. It has the advantages of large bandwidth, large optical...

Viernes 20 enero 2023

Sintai full range of china optical modules include SFP(1.25G/2.5G), SFP+(10G), SFP28(25G), QSFP+(40G), QSFP28(100G), CFP(100G), CFP2(100G/200G/400G), single mode transceivers, multimode transceivers, BiDi transceivers, CWDM transceivers, DWDM transceivers,, etc. Types of Optical Transceiver...

Sábado 03 diciembre 2022

The DWDM add-and-drop multiplexer card launched by Sintai Communication Co., Ltd is generally used in the intermediate nodes of chain or ring-type network, which can selectively receive and transmit or upload and download some wavelength division channels from the transmission signal...

Sábado 03 diciembre 2022

Dispersion Compensation Module (DCM) is designed to fix the form of optical signals that are deformed by chromatic dispersion. The main constituent of DCM is DCF (Dispersion Compensation Fiber) with a negative chromatic dispersion value within the wavelength range between 1525nm and 1565nm...

Sábado 03 diciembre 2022

Sintai Aggregation & Distribution System offers 32*100G Aggregation and Distribution system(ST32C) and 48*10G +6*100G Aggregation and Distribution system(ST-X48C6) which has the characteristics of high port density, rich working mode, flexible high-performance deployment, convenient...

Sábado 03 diciembre 2022

01- 4CH CWDM Mux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G.694.2 wavelengths between 1270nm to 1610nm in 20nm increments. CWDM/X modules are protocol and rate transparent allowing different services up to 10Gbps...