EXTRUSION - 1578 Anuncios

Martes 08 marzo 2022

Precio : 1000-6000USD

Normally two ways to make spandex yarn, dry spinning and melt spinning. Dry-method uses solvents. Solvents not only damage the environment but also harm the human body. The residual toxic solvents in the products have been banned by the European Union for the use of dry-method spandex...

Martes 08 marzo 2022

Precio : 1000-6000USD

Sheet Extrusion Line Sheet extrusion line refers to the production equipment which is used to heat the plastic raw materials (particles) in the plastic extruder, melt them, and then extrude them into sheets through the mould. Plastic sheet produced by equipment and machine in plastic...

Martes 08 marzo 2022

4Cr5MoSiV1 Steel As H13 air-quench-hardening hot work die steel imported from the United States, 4Cr5MoSiV1 is representative steel grade with a wide range of uses in hot work die steel. Its properties and uses are basically the same as that of 4Cr5MoSiV steel. The applied standard...

Martes 08 marzo 2022

Precio : 1000-6000USD

Sheet Extrusion Dies Plastic sheet extrusion mold is to shape and extrude the plasticized plastic raw materials into molds with different thickness, width, and shape. Jwell extrusion machine company has its own mold processing workshop, specializing in processing all kinds of plastic sheet molds...

Martes 08 marzo 2022

Precio : 1000-6000USD

PVC Twin Screw Extruder PVC is a non-crystalline polymer of polyvinyl chloride. Its glass transition temperature is 105℃-75℃ depending on the molecular weight. It has flame retardancy, high rigidity, excellent chemical resistance, and electrical insulation, but it is a heat-sensitive resin...

Martes 08 marzo 2022

Precio : 1000-6000USD

PVC Sheet Extrusion Line The PVC sheet extrusion production line of jwell company is divided into hard sheet and plate, mainly as follows: There are two kinds of PVC hard sheets: transparent hard sheet and opaque hard sheet: PVC transparent hard film: Medicine / gift / stationery packaging...

Martes 08 marzo 2022

Precio : 1000-6000USD

PVC Profile Extrusion Line This PVC profile extrusion line features stable plasticization, high output, low sheering force, long life service, and other advantages during PVC profile extrusion process. The production line consists of control system, conical twin-screw extruder or...

Martes 08 marzo 2022

Precio : 1000-6000USD

Automatic Blow Molding Machine 1. In recent years, the electric blow molding machine has great advantages in the clean production and energy saving of blow molded products, and automatic blow molding machine's research and development progress are relatively fast. For some blow molding...

Viernes 21 enero 2022

Different types of wall cladding are the surface of the building. Just like the face of a man, treat your wall with composite deck cladding, then you will have one wood-like and natural surface wall, close to nature, close to the wood, but superior to wood in split and rot resistance...

Viernes 21 enero 2022

Otalum was founded in 1984 and after 36 years' development, Otalum has become a professional aluminium section manufacturer for architectural systems and industrial applications. Aluminium Heatsink Profile Otalum stocks a wide range of extruded aluminum heatsink and provide aluminium...

Viernes 21 enero 2022

Otalum was founded in 1984 and after 36 years' development, Otalum has become a professional aluminium section manufacturer for architectural systems and industrial applications. Aluminium Formwork Aluminium formwork is a construction system for casting the concrete structure of a building...

Viernes 21 enero 2022

OTALUM was founded in 1984 and after 36 years' development, we have now already become a professional aluminium profile manufacturer for architectural systems and industrial applications. Our factory is well equipped with 40 extrusion lines with a capacity of 500- 5500 tons. Our total...

Viernes 21 enero 2022

OTALUM was founded in 1984 and after 36 years' development, we have now already become a professional aluminium profile manufacturer for architectural systems and industrial applications. Our factory is well equipped with 40 extrusion lines with a capacity of 500- 5500 tons. Our total...

Martes 11 enero 2022

Shenzhen Carry Display Technology Co, Ltd, a leading manufacture and developer of commercial LCD & LED displays. We focus on indoor / outdoor LCD digital signage, LCD video wall system, Interactive white board for education and meeting system, LED screen display systems, etc....

Martes 11 enero 2022

As one of the reliable custom silicone manufacturers in China, SiSiB supplies products like silanes and siliconates, silicone fluids, silicone emulsion, silicone gel and oil, silicone polymer, silicone rubbers, silicone resins and fumed silicas, all manufactured by our factory. SiSiB...

Sábado 01 enero 2022

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Jueves 23 diciembre 2021

With regard to production specifications, LESUN not only offers standard twin screw extruder parts made by general extruder screw manufacturer, but also provides special-purpose extruder parts design and manufacturing service according to your requirements. Screw Barrel Manufacturer...

Jueves 23 diciembre 2021

With regard to production specifications, LESUN not only offers standard twin screw extruder parts made by general extruder screw manufacturer, but also provides special-purpose extruder parts design and manufacturing service according to your requirements. Barrel plays an importante...

Jueves 23 diciembre 2021

With regard to production specifications, LESUN not only offers standard twin screw extruder parts made by general extruder screw manufacturer, but also provides special-purpose extruder parts design and manufacturing service according to your requirements. Conveying Screw Element...

Martes 14 diciembre 2021

Cantidad : 100 SET/mo - Precio : $31250-$220000

Jwell's PC Sheet Extrusion Line, PMMA Sheet Extrusion Line is mainly divided into the following types: Application scope of PC endurance board: gardens, exotic decorations in entertainment places and corridors and pavilions in rest places; Interior and exterior decorations of commercial...

Martes 14 diciembre 2021

Cantidad : 100 SET/mo - Precio : $31250-$220000

The screw of the masterbatch extruder series consists mainly of two parallel cylindrical screws, which rotate to the opposite direction. Parallel double screw rotational speed is low, less heat, shear stability of the materials in the barrel, uniform, screw for material conveying...

Martes 14 diciembre 2021

Cantidad : 100 SET/mo - Precio : $31250-$220000

HDPE pipe extrusion machine production line adopts the most advanced technology of Europe, It is a new research achievement of energy-saving production line, which is suitable for high-speed extrusion of HDPE, PP, and other polyolefin pipe. compared with cornmon production line...

Martes 14 diciembre 2021

Cantidad : 100 SET/mo - Precio : $31250-$220000

Here, you can learn about various JWELL extrusion line and related components of extrusion line machine, such as sheet extrusion line, plate extrusion line, board extrusion line, film extrusion line, pipe extrusion line, profile extrusion line, twin-screw compounding line, extruder, mold...

Martes 30 noviembre 2021

Types of Automotive Parts Products Milling Aluminum 6061-T3 Parts More colors for anodizing aluminum 6061-T3 machine parts processed by Forlong precision milling services. 6061 aluminum belongs to one kind of precipitation-hardened alloy material which is made up of magnesium and...

Martes 23 noviembre 2021

China Aluminum Sheet Supplier Henan Lichen aluminum Co., LTD is a professional hot rolled aluminum plate, 1000~6000 series aluminium coil factory, and a professional China aluminium coil company. 20 years Experience in's china aluminum products factory is waiting for you! Differences...

Jueves 18 noviembre 2021

XPS foamed board, has a perfect close. Its density, water absorption coefficient of heat conducting and the coefficient of steam pervasion are all lower than those of other board heat preservation materials. They have the characteristics of strong intensity, light material, airtight...

Jueves 18 noviembre 2021

In recent years, wood-plastic products have become popular materials for ordinary household decoration and municipal construction projects. On the basis of the original wood-plastic equipment, our company has improved and developed the wpc production line equipment. The wood-plastic...

Jueves 18 noviembre 2021

Our company develop this wood plastic extrusion line which is fully mixed with raw materials such as PVC, PP, PE and other plastics and plant fibres such as Wood flour, rice husk, straw, and then subjected to plastic processing techniques such as extrusion, moulding, and injection...

Jueves 18 noviembre 2021

SWP series crushers are mainly used to recycle every kind of waste plastic; model 160 and 320 are used to break a plastic film, knitting bag, thin and long fibre and threadlike thing; model 880 and 500Q are used to break the large plastic board and hollow vessel; model 400 and 630...

Jueves 18 noviembre 2021

1. Gentle moulding design of SJSZ Conical Twin Screw Extruder guarantees the quality of the matter. 2. Dependable and valid design theory guarantees the dependable operation of extruding. The special big torque drive system, gear tooth and shaft are high-intensity alloy steel which...