Wood Plastic Extrusion Line

Our company develop this wood plastic extrusion line which is fully mixed with raw materials such as PVC, PP, PE and other plastics and plant fibres such as Wood flour, rice husk, straw, and then subjected to plastic processing techniques such as extrusion, moulding, and injection moulding to produce plates or profiles.

This production line is mainly used to produce WPC profile, such as Ceiling, Deck, Floor, Cornice, Plank, Windows, Door frame and board and etc.

Wood Plastic Extrusion Line List

PVC Wood-Plastics Composite Wallboard Production Line

PVC Wood-Plastics Composite Wallboard Production Line

WPC Extrusion Production Equipment

WPC Extrusion Production Equipment

Operating Regulations of Wood Plastic Extrusion Production Line

1. Inspection in front of the machine: In order to avoid human negligence causing unstable quality or stoppage in the middle, inspection work must be done and handover records must be made before starting the machine. If you want to check whether the circulating water circuit is unblocked; check whether the refrigeration system can work normally, etc.

2. Install the mold: correctly install the target mold, and adjust the extrusion mold and the shaping mold to the same.

3. Preheating: According to the characteristics of the extruder and wood-plastic raw materials, the barrel and die of the extruder must be heated before production.

4. Startup: After the above inspection and procedures are confirmed to be correct, prepare to start up.

5. Shutdown: When a working period is over or when it needs to be shut down for other reasons, prepare to shut down. Turn off the unloading motor, and put down the cleaning material at the unloading port.

6. Record: At the end of a shift, clean and maintain the machine.

Benefits of Wood-plastic extrusion production line

Wood-plastic extruder production line, the use of special design barrel screw and extruder production of wood products. Extruder stand-alone or two-stage mixing directly out, can also be granulated after the second extrusion, saving space, with high yield, extrusion pressure stability, preheating feeder placed at the top of the host, the first out of most Wood powder in the residual moisture, so that the host feeding section is more substantial, improve the plasticizing effect and so on. Screw design using a small shear force, not easy to cut wood fiber, can make the material in the barrel to stay within the time evenly. Barrel screw with inlaid alloy and spray wear-resistant corrosion-resistant alloy, greatly extending the service life.

The production line by a series of conical twin screw extruder, vacuum forming machine, traction machine, cutting machine, stacker. It can be used in a variety of plastic products.

Kailite is a plastic crusher company, we provide wood plastic machine, extrusion line and etc. Want to know more? Please contact us.