INTERFACE - 7690 Anuncios

Viernes 15 marzo 2024

Fire Alarm for Energy Storage Power Station Energy storage power station with fire detection devices in real time collection and the surrounding area environment temperature, concentration of carbon monoxide, hydrogen concentration and the concentration of VOC and smoke concentration...

Viernes 15 marzo 2024

Fire Alarm Controller for Energy Storage Power Station The Fire alarm controller is set in each energy storage cabin, with alarm signal acquisition with the cabin detector, start the Fire extinguishing device, linkage alarm, linkage communication with BMS and other functions. Parameters...

Viernes 15 marzo 2024

Explosion Proof Wireless Access Point Intrinsically safe wireless access point, mode AP198-F, adopted flame-proof type structure, suitable for the site of the explosion of the mixture,like zone 1 and zone 2 flammable gas or vapor and air with IIA and IIB environment and ignition temperature...

Viernes 15 marzo 2024

Precio : 0.1~1000usd

XCTF-8200A-C13 Smart Interface Card The Invengo XCTF-8200A-C13 UHF card is a passive UHF(RAlN RFID) smart card designed for superior read/write performance. The smart UHF card is EPCglobal Class 1 Gen 2 V2 and lS0 18000-63 compliant, combining Invengo's advanced antenna design and...

Viernes 15 marzo 2024

Precio : 0.1~1000usd

XC-RF868 Fixed Reader Invengo's XC-RF868 loT Smart Reader adopts excellent architecture design and powerful reading and writing algorithm. It equips with Impinj R2000 chip and supports 6-channel RF ports. The reader is available to match various specifications of antennas and has...

Viernes 15 marzo 2024

Precio : 0.1~1000usd

XC-RF861 Linux RFID Reader Invengo's XC-RF861 is a compact uhf rfid fixed reader that delivers excellent performance at an incredible value. The Linux NFC tag reader has a sleek design and is easy to install The XC-RF861 is Linux based, combining reliable reading with ease of programming...

Viernes 15 marzo 2024

Precio : 0.1~1000usd

XC-RF850 UHF RFID Integrated Reader Invengo's XC-RF850 is a compact and fully integrated RAlN RFID(UHF) reader that delivers excellent performance at an incredible value. The RFID UHF reader has a sleek design and is easy to install. The XC-RF850 rfid scanners for sale is based on...

Jueves 14 marzo 2024

Prodigy Player Pro Prodigy Player Pro is a rapid prototyping software that works with the FPGA-based prototyping platforms from S2C. Prodigy Player Pro plays three roles in speeding your development process - it configures the prototype, runs remote system management and provides...

Jueves 14 marzo 2024

Prodigy S7-13P Logic System The Prodigy S7-13P Logic System, featuring Xilinx's cutting-edge Virtex UltraScale+ VU13P FPGA (also known as XCVU13P FPGA), is an advanced prototyping platform that offers enhanced capacity and performance. With its innovative design, the Prodigy S7-13P...

Jueves 14 marzo 2024

Prodigy S7-9P Logic System – Prototyping with VU9P FPGA Prodigy S7-9P Logic System The Prodigy S7-9P Logic System by S2C is an entry-level multi-FPGA prototyping solution that utilizes the advanced Xilinx VU9P FPGA (also known as XCVU9P / XCVU9P Xilinx FPGA) from the Virtex UltraScale+ series...

Jueves 14 marzo 2024

Precio : 50~1000 USD

The EFG20H professional digital advanced force gauge indicator is designed to work with a wide range of Mikrometry remote force and torque sensors. With 4 inch LCD screen, customizable resolution, lathe chuck grip force meter support up to 6 digits display. The EFG20H life force energy...

Jueves 14 marzo 2024

Precio : 50~1000 USD

Mikrometry cap removal torque tester is an intelligent multi-functional measuring instrument that is designed for testing various kinds of bottle lid torque. Bottle cap torque tester is mainly used in testing and calibrating tighten force, parts torsional destructive testing, etc...

Miércoles 13 marzo 2024

Cantidad : 50pcs

All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 15KW 120/240V Inverter for mobile vehicle application This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode...

Miércoles 13 marzo 2024

GHOPTO short wave ir camera is based on an in-house developed InGaAs detector with multiple resolutions. The compact GH-SW640HS-CL meets requirements of high sensitivity in the SWIR range from 900nm to 1700nm and with accompanied by extended wavelength from 400nm to 1700nm options...

Miércoles 13 marzo 2024

The SWIR Camera series feature a 640 x 512 pixel InGaAs focal plane array (FPA) with a pitch of 15μm. The camera operates in the 900nm – 1700nm wavelength range, which covers the SWIR region of the spectrum. The product has the characteristics of small size, high reliability and excellent...

Miércoles 13 marzo 2024

Temporarily unavailable The first domestic high-resolution SWIR camera independently developed and designed by GHOPTO has a resolution of 1280×1024 pixels, 15μm pixel pitch, and high-sensitivity detection capability in the 900nm-1700nm band, which can provide high-definition images in this band...

Miércoles 13 marzo 2024

This series is a TE-Cooling USB3.0 interface short-wave vis swir camera which adopts SONY SenSWIR InGaAs sensor. This camera has high quantum efficiency and high sensitivity. SWIR series can be used in NIR-II vivo microscopic imaging, hyperspectral imaging, laser spot observation...

Miércoles 13 marzo 2024

This series is a GigE interface short wave infrared camera which adopts SONY SenSWIR InGaAs sensor. This camera has high quantum efficiency and high sensitivity. SWIR series can be used in laser spot observation, machine vision and general infrared detection, near-infrared spot detection...

Miércoles 13 marzo 2024

Intelligent auto-dimming Smart Sync Zoom Smart match, Hot-swappable Real-time monitoring, intelligent control Intelligent Temperature Control Photoelectric conversion rate of 90% TECHNICAL SPECIFICATION OF 1550NM LASER ILLUMINATION MODULE SWIR LENSES & ACCESSORIES Type IR-1550-2W...

Sábado 09 marzo 2024

Optical fiber interface is a physical interface used to connect optical fiber cables. FC is the abbreviation of ferrale connector. Its external reinforcement method is metal sleeve, and the fastening method is screw buckle. St interface is usually used for 10base-f, SC interface is...

Viernes 08 marzo 2024

1. Corrosion resistance 2. Low blank value of metal elements etc. 3.Strong transparency, can clearly observe the phase interface 4. High temperature and high pressure sterilization can be carried out 5. The cover and piston are leakproof and the piston device is easy to remove for...

Jueves 07 marzo 2024

Wafer Carrier is made from PTFE, able to resist strong acid, strong hydrofluoric acid, strong base and heat up to 200~250ºC, use to deliver wafers in acid & base process of Fabrication factory. Low profile design allows the greatest possible wafer exposure to increase cleaning...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

Probador de volumen de dibujo RDVT-01 Solicitud Un tubo de extracción de sangre Vacutainer es un recipiente especializado elaborado a partir de vidrio o plástico, equipado con un tapón de goma de color para crear un sello de vacío. Este sello simplifica el proceso de extracción y...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

El probador de impacto con martillo de péndulo PHS-01 está diseñado de acuerdo con la norma internacional IEC 60068-2-75, que se centra en probar la robustez mecánica de diversos equipos y productos. Esta norma describe métodos para evaluar la capacidad de una muestra para soportar...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

Presentamos el microprobador de fugas MLT-01 Descripción general del método de descomposición del vacío La prueba de caída del vacío es un método cuantitativo para detectar fugas en diversos envases, tanto rígidos como flexibles, sin causar daños. Identifica eficazmente fugas en la...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

Probador de adherencia en caliente HTT-02 Solicitud: La adherencia en caliente, un aspecto crítico de las capas termoselladas, determina su capacidad para soportar fuerzas de separación mientras aún están calientes, lo que es particularmente vital en los procesos de formado, llenado...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

Probador de durabilidad flexible GFT-01 Fondo Los materiales de barrera flexibles deben soportar tensiones repetitivas, lo que se conoce como durabilidad a la flexión o resistencia Gelboflex. Una fuerte resistencia al agrietamiento por flexión es crucial para reducir el riesgo de...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

El probador de fricción y pelado FPT-01 es un dispositivo versátil adecuado para una variedad de aplicaciones. Mide con precisión los coeficientes de fricción estáticos y cinéticos en una amplia gama de materiales, incluidas películas plásticas, caucho, papel y telas. Esta capacidad...

Jueves 07 marzo 2024

Standard Battery Pack Standard Battery Pack C&D provided by standard ev battery pack supplier Lslithiumbattery is our standard flexi pack design using lifepo4 prismatic cells LFP205Ah, lifepo4 230AH, 280AH Lifepo4, and 230AH Lifepo4. The fixed dimension with multiple battery combinations...

Jueves 07 marzo 2024

Cantidad : 200sets pe - Precio : 200000~800000

DUST COVER WELDING MACHINE The Dust Cover Welding Machine is a machine designed to make covers for welding machines. The machine uses a welding process to attach a cover to the base of a welding machine, protecting it from dust and other contaminants. It is built to handle heavy-duty...