TECHNICAL - 12672 Anuncios

Viernes 20 abril 2018

Cantidad : 200 - Precio : 10 usd/kg

MJ-2230 silicone for injection mold Description MJ-2230 is a two-component liquid silicone rubber with good dimensional stability, and good mold release, heat up to over 250°C, it is widely used in rapid prototyping gems mold. Application MJ-2230 are mainly used for rapid prototyping gems molds...

Viernes 20 abril 2018

Cantidad : 200 - Precio : 10 usd/kg

HY-Y820 life casting silicone is kind of two-component platinum catalysed liquid silicone. The product is colorless or skin-colored oily liquid, and can be very soft and elastomeric after vulcanization. HY-Y820 are mainly used for Breast enhancer, body organ, dolls, toys, silicone prostheses...

Jueves 19 abril 2018

Cantidad : 100 or abo - Precio : 6500 USD

Welcome To Mask Machine ! We are a high quality machine shop that wants to meet your needs in a timely manner. Please look through our pages and see how we can meet your needs. Introduction Facial mask filling machine is mainly used for folding the mask film into wanted shapes, then...

Martes 17 abril 2018

Cantidad : 8888 - Precio : 1 000,00 €

Instant Coffee powder sieving and impurity Application It is suitable for any dry material screening from 0.74-5mm., the largest particle size is 10mm.It is widely used in: 1) Chemical industry: resin pigment, medicine, grease, paint, palette, etc. 2) Abrasive material and ceramic industry...

Martes 17 abril 2018

Cantidad : 8888 - Precio : 1 000,00 €

- rice vibratory sieve separator - Application It is suitable for any dry material screening from 0.74-5mm., the largest particle size is 10mm.It is widely used in: 1) Chemical industry: resin pigment, medicine, grease, paint, palette, etc. 2) Abrasive material and ceramic industry...

Martes 17 abril 2018

Cantidad : 8888 - Precio : 1 000,00 €

- Cinnabar Powder Vibratory Sieve - Application It is suitable for any dry material screening from 0.74-5mm., the largest particle size is 10mm.It is widely used in: 1) Chemical industry: resin pigment, medicine, grease, paint, palette, etc. 2) Abrasive material and ceramic industry...

Martes 17 abril 2018

Cantidad : 500pcs - Precio : $38/pcs

Model No.: AA-004 （Ozonator LED） Voltage: AC110~240V/50Hz Power Consumption: 15W Ozone Output: 400mg/h Ozone Working Time: 5-30min per time Operation Mode: 6 modes (water purification, fruit & vegetable sterilization, daily necessities disinfection, fish & meat disinfection...)

Jueves 12 abril 2018

- MAIN FEATURE - ●An entry-level all-rounder, choose your tool changer, linear or carousel, extraordinary solution with competitive price. ● Using world-class components, e.g. 9.0kw ATC spindle, Japan Yaskawa servo motor driving system,　Japan Shimpo gear reducer, Schneider low voltage...

Jueves 12 abril 2018

- DESCRIPTION - The SZ E1-Mini CNC Engraving Machine table top CNC router is a versatile machine, with it's compact design and high performance spindle it is capable of machining a vast range of materials and is used widely by engravers. Engraving nameplates, plaques, memorial signs...

Martes 03 abril 2018

Cantidad : 100 - Precio : 30 000,00 €

Beneficiation plant EPC Sinonine provides clients with services of beneficiation test, engineering design, equipment supply, installation & commissioning and technical training etc., and solves the common problems in plant construction such as budget overrun, schedule delays,...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...