NOZZLE - 2412 Anuncios

Viernes 05 enero 2024

PA6 GF 30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat resistance 82-148...

Viernes 05 enero 2024

PA6 GF15 with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Viernes 05 enero 2024

PA66GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of pa 6.6 gf50 (A2011J) PA66 50%GF HB grade is applied...

Miércoles 03 enero 2024

A high pressure water manifold is a crucial component in industrial and commercial settings where high-pressure water distribution is required. It serves as a central hub that receives high-pressure water from a source and distributes it to various points within a system. The high-pressure...

Jueves 28 diciembre 2023

The system is not only as simple as wiping the water off the windshield, but also wipes the rainwater on the glass surface into a uniform water film layer, allowing the light to pass through smoothly without refraction to ensure the driver's vision is clear and safety driving. At present...

Viernes 15 diciembre 2023

A connector mold, also known as a connector tooling, is a type of injection mold that is specifically designed to produce connectors or cable assembly components. Connectors are widely used in different industries, such as telecommunications, automotive, consumer electronics, and many others...

Viernes 08 diciembre 2023

G10 male to 6.3~8mm nozzle fitting Introduction G10 male to 6.3~8mm nozzle fitting Pol Adaptor Specification Size Material Pol Adaptor G10 male to 6.3~8mm nozzle fitting Brass/steel As a professional gas regulator supplier, IGT LPG REGULATOR provides propane tank pol adapter fitting...

Viernes 08 diciembre 2023

Introduction 11mm nozzle to M14*1.5 male Pipe to Hose Adaptor Specification Size Material Pipe to Hose Adaptor 11mm nozzle to M141.5 male Brass/steel As a professional gas hose manufacturer , IGT LPG REGULATOR provides oven gas pipe adaptor, gas cooker pipe adapter, gas...

Jueves 07 diciembre 2023

Precio : 500—15000(USD)

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole...

Sábado 02 diciembre 2023

Draw Texturing Yarn (DTY) is a finished Yarn that is continuously or simultaneously drawn on a winding machine and deformed by a twister. There are generally low elastic silk, shot silk, high elastic silk, light mesh, heavy mesh, no mesh, low elastic light mesh, composite silk, etc...

Viernes 01 diciembre 2023

SBV facing turning tool holders are for external turning and cutting-off operation, with an adjustable cooling nozzle with internal thread. Due to its support design, it is with high rigidity. SBV is for one-direction metal lathe facing tool holders, for double directions, please...

Viernes 01 diciembre 2023

Print-Rite's laser printer cartridge refill offer sharp and professional prints with a high yield of up to 9,000 pages, compatible with various laser printers. The laser toner cartridges's design prioritizes recycling, reducing environmental impact, while its user-friendly installation...

Viernes 01 diciembre 2023

Ink cleaning solution is a chemical solution designed to clean printer heads, ink cartridges, and other components of inkjet printers. The solution helps to dislodge any dried ink, clogged nozzles, and other debris which can prevent ink from being released properly. It can also help...

Jueves 30 noviembre 2023

The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the scraper bit with welded scraper blade and water divider cap, which is made of medium carbon steel. The lower end is welded with...

Jueves 30 noviembre 2023

PDC bit for sale are polycrystalline diamond compact bits. PDC bit are widely used in oil drilling because of their fast drilling speed, long life and high feed rate, and are composed of drill body, PDC cutting teeth and nozzle. Steel body oem pdc bit material is made of medium carbon...

Miércoles 29 noviembre 2023

PA66 is nylon 66, namely pa66_gf35 is glass fiber. Generally expressed as PA66 GF35, that is, 35% glass fiber is added to nylon 66. Typical Application of PA 66 GF 35 (A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Miércoles 29 noviembre 2023

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, forinjection moulding. PA6 6 GF30 is a common nylon material known for its high strength and durability, as well as provides enhanced mechanical properties. The glass fiber reinforcement of PA66 30 GF plastic improves...

Miércoles 29 noviembre 2023

Material PA 66 GF 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Miércoles 29 noviembre 2023

PA 66GF30 FR is a Nylon 66 with 30% glass-fibers and flame retardant halogenated. Typical Application of PA66 GF30 Halogenated FR (A2014F) The advantage of nylon 66 GF30 halogenated FR can maintain the original physical and chemical properties of flame retardant products. Processing...

Miércoles 29 noviembre 2023

Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF20, it shows high oil resistance, high impact resistance, good resistance to low-temperature notch impact strength for high impact resistance parts. Anmei modified plastic, as a big and responsible PA66 GF 20 manufacturer...

Miércoles 29 noviembre 2023

Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF 20 halogenated FR. Typical Application of Anmei PA66 GF20 Halogenated FR (A2014D) (A2015D) PA66 20% glass fiber and halogenated flame resistance mixed modified...

Miércoles 29 noviembre 2023

PA6 6GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei Group PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with...

Miércoles 15 noviembre 2023

7CF® DIY Wall Repair Spray Paint is an environmentally friendly water-based aerosol paint with excellent performance such as low VOC, low odor, simple construction operation, good spray atomization, high spray rate and strong coverage. Wall stains, wall peeling, graffiti can easily be covered...

Miércoles 15 noviembre 2023

7CF® Custom Color Spray Paint is made from thermoplastic acrylic resin and the pantone colour aerosol spray paint can be applied by aerosol spray and provide films with excellent performance such as excellent weather resistance, good levelling, strong coverage, fast dry, high build...

Miércoles 15 noviembre 2023

7CF® chain cleaner spray is a fast-drying formula that quickly and safely removes grease, oil, brake fluid and other contaminants from chains and all other mechanical equipment(spindles, exposed gears, brake parts, rails, hinges, winding machines, cables, etc.) without disassembly...

Miércoles 15 noviembre 2023

Cantidad : 30 million - Precio : USD0.0058-USD0.128

The sterile disposable hypodermic syringes or disposable hypodermic needles are assembled by the barrel, plunger, piston, with/without hypodermic needle, which can be classified into central nozzle type and side type according to the prick connector. Sterile Hypodermic Syringe Introduction...

Martes 14 noviembre 2023

Description of undercoating spray gun Undercoating, as a barrier, protects the object from corroding because of moisture, salt, and other substances. Using an undercoating spray gun to apply undercoating to the object is one of the convenient methods. The undercoating spray gun is...

Martes 14 noviembre 2023

Application of miniature spray gun ZEGO provides miniature spray gun and mini touch up spray gun, featuring a low-volume and low-pressure function which enables the worker easily control the spray flow, reducing excessive spraying and waste. Professional advice and good service. RFQ today...

Martes 14 noviembre 2023

Description of Tire Inflation Gun If you have a car, you must prepare an air tire inflating gun on your vehicle. Air inflating gun will ensure that you can quickly solve some tire pressure problems. A tire inflation air gun with a pressure gauge can be used for filling tires of various...

Martes 14 noviembre 2023

Spray foam gun In the process of spraying materials, spray foam gun is essential. The spray foam gun needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no...