Algomtl
svgfair.com
 
PDC DRAG BIT
Detalle
China Piel/zapatos
Piel/zapatos

PDC DRAG BIT

The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the scraper bit with welded scraper blade and water divider cap, which is made of medium carbon steel. The lower end is welded with scraper blade and water dividing cap, and the upper end is connected to the drill column with a wire fastener. The drag blade, also called the blade wing, is the main working part of the scraper bit.

PDC Drag bit are suitable for drilling in soft to soft soils and plastic and brittle formations such as mudstone, muddy sandstone, shale, etc. SML's Drag bits are generally produced in customized styles, mostly based on customer drawings and size requirements.

Features Of PDC Drag Bit
PDC Drag Bit are suitable for soft and cohesive formations. Scraper bits break rock by cutting. When a scraper bit works in a soft plastic formation, the cutting process is similar to that of a knife cutting soft metals. The blade eats into the formation under drilling pressure, while the rock in front of the cutting edge is continuously flowing plastically under torsional force, and the rock at the bottom of the well is stripped up in layers.
Advantages Of SML PDC Drag Bit
Professional customization: senior designers design corresponding drawings according to customer needs to meet customer demands.
Extra large water hole design is conducive to water intake and slag discharge, increasing drilling efficiency.
PDC Drag Bit adopts the principle of equal cutting volume to lay the teeth, which makes the bit wear more evenly and prolongs the bit life to the maximum;
The PDC Drag Bit adopts the hydraulic structure of blade wing combined with water eye and flow channel, so that the bit can be cleaned timely, avoiding the repeated breaking of rock chips and giving full play to the cutting efficiency of the bit.
In terms of manufacturing process, we have researched and developed medium frequency induction low temperature brazing technology and PDC drill bit mold forming technology to ensure the manufacturing quality of the drill bit.
Drag Bit has wide adaptability to the formation and can be used for drilling in soft to medium-hard (2-6.5 grade) non-abrasive formations.

If you are looking for a reliable drill bit factory, don't hesitate to contact us!

Ubicación : No. 009-12F, D2 Software New TownHuacheng Avenue, East Lake Development ZoneWuhan, 430076 ZoneWuhan,
Persona a contactar : smlpdcbit smlpdcbit, 0086 27 63492900

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
PDC DRAG BIT

Buscar en la categoria : Piel/zapatos
Buscar en la categoria :
drag
España 28970 Bienes de equipo
La cortadora de patatas corte plano modelo caracol es diseñada para el corte de patatas chips

Tuesday 28 April 2026

Cantidad : 1

La cortadora de patatas corte plano modelo caracol es diseñada para el corte de patatas chips, corte en agua y saboreada, es una cortadora de fácil manejo con corte regulable. - Construida en funcicion aluminio y acero inox. - Facil regulación y cambio de cuchillas. - Salida...

Mafrigarlo

China 523220 Mayoristas / proveedores
Encapsulated adhesive for electronic equipment

Sunday 28 February 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Guangzhou Usilicone Chemical Technology Co.,Ltd

  • 523220 - Guangzhou
  • +086 0769 88888312
Francia 42952 Materiales de ocasión
Roland R 304 HOB-E+LV - Año 1999

Saturday 15 November 2014

Vendo Roland R 304 HOB+LV (P), Año 1999 52x74 - 4 Colores + Torre Barniz Anilox con "Chambered Doctor Blade" + Salida Prolongada RCI 2 - PPL (Ajuste de Planchas Semiautomático) - CCI con ColorPilot Grapho Metronic - Ajuste de Formato y Grosor del papel Automático - Lavado Automatico...

ACS DIFFUSION s.a.s.

  • acsdiffusionsa
  • 42952 - Saint-Etienne
  • 0033 (0)4 77 92 77 88
  • 06 10 63 37 83
 
Pago seguro

Informations

Les plus recherchés