OPERATIONS - 15245 Anuncios

Miércoles 06 septiembre 2017

Precio : 4700USD-5500USD

JS series twin shaft mixer has advanced design and reliable performance which is widely used in construction business.It can mix many kinds of materials such as harsh and plastic concrete, aggregate and others effectively with energy saving. High automation and efficiency; Good quality...

Miércoles 06 septiembre 2017

Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary...

Miércoles 06 septiembre 2017

Drill Flocking Performance Tester Testing Standards: GB/T 12705.1/14272, BS EN 12132-1 Applications: Drill Flocking Performance Tester is designed for determining the down-proof properties of fabric for the liner material, feather or fibers of winter clothes, down jacket, quilts...

Miércoles 06 septiembre 2017

MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics. Product Information: Fabric...

Miércoles 06 septiembre 2017

Digital Elmendorf Tearing Tester Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard...

Martes 05 septiembre 2017

Vertical & Horizontal Flame Test is a plastics flammability standard released by Underwriters Laboratories of the USA. The UL-94 standard classifies plastics according to how they burn in various orientations and thicknesses. Horizontal Flame Tests： UL-94-HB: slow burning on a...

Martes 05 septiembre 2017

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples...

Martes 05 septiembre 2017

The glow wire tester Brief Introduction About the glow wire tester operation instructions according to the GB5169 and GB4706 the design and manufacturing requirements with the standards so called glow wire test method, which apply to the fire danger test on electrical and electronic products...

Martes 05 septiembre 2017

Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree...

Martes 05 septiembre 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...

Martes 05 septiembre 2017

A six station Colorfastness/Rubbing Tester used to determine crocking, color transfer, and abrasion resistance of leather, fabric, vinyl, stitched seams, plastics and other materials. Each station is equipped with a removable rub head and set of table clamps to facilitate up to six...

Martes 05 septiembre 2017

Introduction Crosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the evaluation of the sensory level of scratches, changes in color difference between scratched area and unscratched area, or the detaching situation...

Martes 05 septiembre 2017

Taber abraser(Abrader) consists of a rotary platform to place test specimen, a pair of articulated arms with friction wheel, a motor used to drive the turntable rotation, a counter used to set the rotation number of turntable with the automatic stop function, and a suction device...

Viernes 01 septiembre 2017

Automatic Plantain Chips Processing Line consists of Banana slicing machine, Banana washing machine, Banana slice blanching machine, Dehydrating machine, Frying machine, De-oiling machine, Seasoning machine, Manual picking line and Vacuum packing machine. Automatic Plantain Chips...

Viernes 01 septiembre 2017

Small Banana Chips Plant consists of Banana Peeling, Peeled Banana Slicing, Banana Slice Blanching, Banana Slice De-watering, Banana Chips Frying, Banana Chips De-oiling, Banana Chips Flavoring and Banana Chips Packaging. The difference between semi-automatic line and fully-automatic...

Viernes 01 septiembre 2017

Introduction Launder-ometer /washing color fastnesss tester can be used for washing, dry cleaning color fastness test. Double cylinder separation, respectively, with an independent operation control panel, can be carried out two different temperature experiments at the same time....

Viernes 01 septiembre 2017

Horizontal Flammability Tester Standards: ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132, JIS D1201, AU 169 Applications: The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for automotive...

Viernes 01 septiembre 2017

Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal natural climate and solar and other experimental conditions to to test the color and performance of textile dyes. It can also test the...

Viernes 01 septiembre 2017

A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional to the severity of the fire, such as the rate...

Viernes 01 septiembre 2017

Hydrostatic Head Tester Testing Standards: GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN 20811/3321/3424, AFNOR G07-057, ISO 811, JIS L1092A, JIS L1092.B-a, JIS L1092 B-b, ASTM F903C, ASTM F1670, ASTM F1671, EN 1734, ISO 1420, FZ/T 01004 Applications: Hydrostatic Head Tester is designed...

Viernes 01 septiembre 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Jueves 31 agosto 2017

Asia Pool & Spa Expo 2018 15-17 May, 2018 Poly World Trade Center Expo . Guangzhou, China Asia Pool & Spa Expo 2018, one of the leading industry trade fair for the industries of swimming pools, spas, sauna, bath, water feature, Water Park in the world, will be held in Poly...

Jueves 31 agosto 2017

Bacterial filtration efficiency Tester of face mask can quickly and accurately measure the filtration efficiency of filtration protection equipment and materials . Salt aerosols or oily aerosols can be used as the test carriers, which are in line with the requirements of US Occupational...

Jueves 31 agosto 2017

Testing of Filter Media is important for both the development and optimization of filter materials, as well as for quality assurance during the production process. The most interesting features for the characterization of cleanable filter media are: ● Curve of pressure drop, ● Curve...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $30000

Product Description High performance cnc lathe machine made in china This series are economical and practical CNC lathe series, which are not only apply to various shapes of complex shaft, sleeve, disk parts of the internal and external surfaces, conical surface, circular surface...

Miércoles 30 agosto 2017

CK0632 balancelle sur le lit 200 cc cnc mini tour à prix abordable Le petit tour adopte la conception d'intégration mécanique et électrique, qui avec une structure raisonnable, une large gamme d'utilisations, un fonctionnement simple, une belle apparence. Il peut effectuer un contrôle...

Miércoles 30 agosto 2017

Cantidad : 100 - Precio : USD200000

Performance Index Parameters Max. Forming Dimension X/Y/Z 120×120×150mm Minimum Thickness 0.4mm Layer Thickness 0.02~0.08mm Forming Speed 1-5cm3/h Reposition Accuracy ±10um Prototyping Accuracy ±0.1mm/100mm Max. Scanning Speed 7m/s Laser Power 200W Powder Diameter...

Miércoles 30 agosto 2017

Cantidad : 100 - Precio : 1 000,00 €

Información detallada Máquina de doblado automático de la tubería con la curva del empuje para el radio grande, dobladoras del rodillo con 3 pilas Material adaptado: tubo de acero, acero inoxidable, tubo de cobre, tubo de aluminio; Industria de aplicaciones recomendada: Accesorios...

Miércoles 30 agosto 2017

Cantidad : 100 - Precio : 1 000,00 €

Información detallada Máquina de doblado automático de la tubería con la curva del empuje para el radio grande, dobladoras del rodillo con 3 pilas Material adaptado: tubo de acero, acero inoxidable, tubo de cobre, tubo de aluminio; Industria de aplicaciones recomendada: Accesorios...

Sábado 26 agosto 2017

Automatic Frozen French Fries Processing Line consists of Potato washing and peeling machine, Potato slicing machine, Potato blanching machine, Potato dehydrating machine, Potato frying machine, French Fries de-oiling machine, Frozen French Fries freezing machine, French Fries packing...