RESISTANCE - 14472 Anuncios

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : 200kg - Precio : 8-20usd/kg

3. Operation Instructions of liquid pad printing silicone rubber Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is c atalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : 200kg - Precio : 6-10usd/kg

Shelf Life and Transportation 1. Twelve(12) months when stored at 25C in original unopened packages. 2. This is a non-dangerous product, it can be transported as general chemicals. 3. Products exceed the storage life should be confirmed normal before using. Technical Guidelines 1...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : 200kg - Precio : 6-10usd/kg

mold making silicone rubber features: 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Excellent tensile and tear strength 5.Favorable hardness 6. High temperature resistance, acid and alkali-resistance and ageing resistance 7...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : no limit - Precio : on application

Thunder Precision Resistor Co., Ltd. Is a 20 years experienced professional manufacturer of high precision resistors and ultra high precision resistors, the all production is strictly controlled and follows an extensive set of instructions established in production procedure for reproducibility...

Viernes 07 agosto 2015

Cantidad : 50ton - Precio : 6usd/kg

Specification - Durable - High tear strength for replication - Low shrinkage - High simulation - Cover fine details Rtv Liquid Moulding Silicone Rubber( for Concrete, PU Resin , Gypsum Casting) 1. Application of rtv liquid moulding silicone rubber : RTV liquid molding casting...

Viernes 07 agosto 2015

Cantidad : 50ton - Precio : 6usd/kg

Specification - Durable - High tear strength for replication - Low shrinkage - High simulation - Cover fine details mold making silicone rubber application mold making silicone rubber is primarily intended for mold making of gypsum, concrete, poly resin ,PU resin, unsaturated...

Jueves 06 agosto 2015

Cantidad : 2000000kg - Precio : 9.58-13.69usd

Addition cure silicone rubber for tire mold making package: If ratio is 1: 1 : Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail. If ratio is 10: 1 : Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail. About us: Equiped with REACH SGS ISO9001 ISO14001 etc. certificate...

Jueves 06 agosto 2015

Cantidad : 2000000kg - Precio : 5.89-9.58usd/kg

3. Operation tips of Rtv Liquid Moulding Silicone Rubber a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a de crease of the tensile and tear strength of the mold and deformation may occur. b. remember to take the proper silicone...

Jueves 06 agosto 2015

Cantidad : 2000000kg - Precio : 6.87-9.98USD

Electronic potting compound silicone rubber Typical Application of electronic potting compound silicone rubber: electronic potting compound silicone rubber is suitable for bonded seal of electronic components, po wer module and control module, which requires waterproof and insulation...

Jueves 06 agosto 2015

Cantidad : 2000000kg - Precio : 7.21-10.33USD

liquid silicone for making transfer pad liquid silicone for making transfer pad Application: liquid silicone for making transfer pad is mainly use for printing irregular patterns of plas tic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier...

Jueves 06 agosto 2015

Cantidad : 2000000kg - Precio : 1.98-3.28USD/KG

Glass Fiber Chopped Strand Mat 1.Glass Fiber Chopped Strand Mat Description E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is ma de by chopping glass fiber first, then be settled down non-directional and uniform, adding some powd...

Jueves 06 agosto 2015

Cantidad : 20ton/day - Precio : 7USD/kg

Aplicación de caucho de silicona transparente Caucho de silicona transparente se especializan para el molde de silicona cristalina, la imitación molde de silicona de circón, cristal de resina de molde de silicona de diamantes, cristal facetas molde de silicona de diamantes, y de...

Jueves 06 agosto 2015

Cantidad : 100kgs - Precio : $20

Material: gr1 gr2 gr3 gr4 pure titanium sheet Standard: AMST,AMS,ASME,BS,DIN,NF,GB,MIL,JIS,SAE Certificate: ISO9001: 2008,SGS Surface Treatment: Acid cleaning,Polished,Casting skin Color: Metal colour Features: · Non-toxic,nonmagnetic,biocompatibility · Healthy environmental...

Jueves 06 agosto 2015

Precio : US $ 20,000 - 25,000

Hydraulic Multi-bucket Excavator for Hollow Brick Making Hydraulic Multi-Bucket Excavator for Brick Plant Project Specifications: 1) Wear-resistance, spraying technology 2) Reasonable structure 3) Long working life 4) ISO certificate Product Superiority: 1.Use bucket excavate...

Martes 04 agosto 2015

Precio : FOB Price: USD100000

Quick Details Model: JKY75/75-4.0 Packaging & Delivery Packaging Detail: Nude Packing or Wrapping by Plastic Firm Delivery Detail: Within 25 days after prepayment Specifications Brick Making Machine for Clay Brick Production Line Product Description 1) Reasonable structure...

Martes 04 agosto 2015

Precio : USD80000-100000/Set

Product Description 1) Reasonable structure 2) High pressure extrude 3) Trowel with wear-resistance metal spay 4) Optional install 5) Stability Specifications: 1.high quality carbon and alloy steel weld , remove welded stress by quench's heat handling 2.use floating trowel...

Martes 04 agosto 2015

Precio : US$ 0.1/piece

- We can custom made for you!!! E-mail or call me directly, Plz just feel free to let us know. Thank you! - Main Properties: Project Name Apparent Density Tensile Strength ≥(min) Unit g/cm3 MPa Result 2.10~2.30 15.0 1. FDA, ROSH certification 2. Customize ptfe gasket 3...

Martes 04 agosto 2015

Precio : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description We can also produce PTFE,PVDF,PEEK etc parts according to customer's requirements. PTFE is many plastic material is one of the most stable heat of a kind of plastic...

Martes 04 agosto 2015

Precio : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description We can also produce PTFE,PVDF,PEEK etc parts according to customer's requirements. PTFE is many plastic material is one of the most stable heat of a kind of plastic...

Martes 04 agosto 2015

Precio : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description We can also produce PTFE,PVDF,PEEK etc parts according to customer's requirements. PTFE is many plastic material is one of the most stable heat of a kind of plastic...

Martes 04 agosto 2015

Cantidad : 8000kg - Precio : 6-10usd/kg

Features: Good characteristics of easy-operation, high duplication times, good flowability and light viscosity ,low shrinkage, no deformation,favorable tension,favorable hardness,high temperature resistance, aci d and alkali-resistance and aging resistance, long shelf life over 12 months...

Martes 04 agosto 2015

Precio : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description PVDF is a high purity engineering thermoplastic with excellent chemical resistance,abrasion resistance,flame resistance and UV stability.PVDF is widely used for...

Martes 04 agosto 2015

Precio : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description PTFE is many plastic material is one of the most stable heat of a kind of plastic, In 260°C cases not happen metamorphism. Therefore, in this case, PTFE still keep...