CARBIDE - 1377 Anuncios

Jueves 24 abril 2014

Cast tungsten carbide powder Character: WC and W2C eutectic structure. Because of its high melting point, high hardness, high wear ressistance, it has a high temperature wear and impact resistance properties. Particle size range: 0.038mm-2.362mm Appearance: dark grey powder Applications...

Jueves 24 abril 2014

Chromium carbide Main physical properties Melting point (℃): 1895 Density (g/cm3): 6.68 Crystal structure: rhomb Color: grey FSSS (um): 2-7 Screen size (mesh): 60-635 Application: it is widely used in aircraft engine and oil chemical industries to enlarge its life span....

Miércoles 23 abril 2014

Thermal spray powder/carbide material for thermal spray HVOF spray powder Cemented carbide spray powder Character: high wear resistance, corrosion resistance and high temperature properties. Appearance: dark gray or metal luster powder Properties and application WC/Co: with...

Martes 22 abril 2014

Macro crystal WC powder Appearance: light grey powder Particle size range: 0.038mm-0.85mm Character: fully carbonized and dense alloyed powder. Compare with normal WC powder by traditional process, it has more uniform structure and higher thermal stability and much big and coarse grain...

Jueves 03 abril 2014

Cantidad : 1000 Ton - Precio : USD 27-42 per kilogr

MEIQI Boron Carbide Boron Carbide is melted in electric furnace from boric acid and carbon by high temperature .It's one of the hardest material worldwide. As its nice physical and chemical properties ,it is the most ideal material for many field .Especial used as high quality abrasive...

Jueves 26 diciembre 2013

Cantidad : good - Precio : 10

As a leading manufacturer of mechanical seals and sealing products in China, Sino-Holding Co., Ltd, with over two hundred staff, in our three factories, are specialized in designing, manufacturing and marketing mechanical seals and sealing products. Founded in 1999, Sino-Holding...

Viernes 15 noviembre 2013

Cantidad : 500pieces - Precio : $300/piece

LG steel tooth bits-Tricone/Rock bits Cutting Sstructure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth suifaces for steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques...

Sábado 26 octubre 2013

Cantidad : 1 - Precio : 10,00 €

Product Description: 　 European Coarse Grinding Mill is widely used in metallurgy, construction, chemical and other industries, also widely used to produce concrete, limestone, raw coal, silicon carbide, gangue, sand, refractory materials and ceramic, etc. It is ideally suitable for primary...

Sábado 12 octubre 2013

Cantidad : depend on - Precio : depend on the raw ma

Dear Friends: How are you? We are the manufacturer of Tungsten carbide products ,and dealing in this line more 18 year, full of experience. And we are looking for Dealer who could cooperated with us and open a the business door on Europe.just received lots of good reputation from...

Viernes 21 junio 2013

Cantidad : 2000T/mont - Precio : 880usd

99.5% high purity white fused alumina/WFA 3-5mm Description: White fused alumina oxide powder is a high-quality raw material, made of fused refin ing crystal, high purity, self-sharpening, good acid and alkali resistance, high temperature, thermal properties and stability it...

Viernes 21 junio 2013

Cantidad : 2000T/mont - Precio : 880usd

Description: white aluminum, a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3. The white alumina produced in titling electric arc furnace has...

Domingo 21 abril 2013

Cantidad : 100 pcs pe - Precio : 500,00 €

Diameter: 25-300mm Performance Repeatability: ±0.2% Accuracy: Standard: ±1.5% of reading; Optional: ±1.5% of reading or ±0.75% of reading Wetted Components Housing: Standard - Tungsten Carbide; Optional - 304, 316 Stainless Steel Bearings and Shaft: ABS (Corrosion Resist)...

Jueves 10 enero 2013

Cantidad : 1000 - Precio : HYDX-6

Esta plataforma de perforación hidráulica HYDX-6 es un nuevo producto hecho por Lianyungang Maquinaria Huanghai. Se trata de una plataforma de perforación completamente nuevo tipo elaborado sobre la base de las técnicas avanzadas en el mundo. Máquina Perforadora Hidráulica Saca Núcleos...

Domingo 25 noviembre 2012

Cantidad : 10 - Precio : 5 000,00 €

Purpose and Characteristics: - Design speed: 200m/min - Effective width of machine: 1400mm-2500mm - Main flute roller diameterφ380mm, pressure roller diameterφ385mm, preheater roller diameterφ400mm. - Vacuum suction paper leading features perfect flute formation - Dual flute structure...

Domingo 11 noviembre 2012

Cantidad : 1 ton a mo - Precio : range 1 to 100 dolla

Zhuzhou Better Trading Co., Ltd locates in Zhuzhou City, Hunan Province, China, the largest tungsten carbide producing area in China. Our main products inclues: skating board, cast tungsten carbide, ferrotungsten, ceramet inserts, PCD tools, porcelain insulators, tungsten carbide rods...

Jueves 08 noviembre 2012

Cantidad : 5000 - Precio : 1,50 €

garden Tool SharpenerPocket Knife Sharpener, Manual, cutlery, knives, outdoor tools sharpening (T0601T), Product Features: pocket knife sharpener, Manual knives, garden tools sharpener REAPLACEABLE sharpener blades pre-set knife sharpener angle Pocket Knife Sharpener Description...

Jueves 08 noviembre 2012

Cantidad : 5000 - Precio : 1,50 €

Mini Knife Sharpener T0501TC It adopts two stages sharpening design to increase the whetting speed and quality greatly. Coarse grinding part adopts high rigidity carbide, removing the cutter surface metal by cutting steel scraps to modify a dull edge. The fine grinding part uses...

Jueves 08 noviembre 2012

Cantidad : 5000 - Precio : 1,50 €

Product Features: 1. Two stages sharpening design of Carbide & Ceramic. 2. Non-Skid Feet provide safety when sharpening. 3. Compact size and light weight for easy carry. Using Instruction: 1.Place the sharpener on the platform, one hand keeps the sharpener, the other holds knife...

Jueves 08 noviembre 2012

Cantidad : 3000 - Precio : 2.9-3.8

specifications: 1. Tapered round diamond coated rod for sharpening serrated and standard edges. 2. Carbide blades make your dull knife edges sharp quickly. Ceramic rods give you a smooth edge. 3. The rotating ceramic rod design extends the using life. 4. Lanyard hole for carrying...

Miércoles 07 noviembre 2012

Cantidad : 1-500KG - Precio : 50-60USD/KG

Woodworking Tool Carbide grade and properties Grade Binder % Hardness(HRA) TRS(N/mm2) YG4F 4.0 93.0 1700 YG6A 6.0 92.5 1800 YL10.2 10.0 91.8 2400 YG6X 6.0 91.5 1800 YG6 6.0 90.5 1900 YG8 8.0 89.5 2200 YG12X 12 88...

Miércoles 07 noviembre 2012

Cantidad : 1-500KG - Precio : 50-60USD/KG

Properties of grades and application recommended. Grade Density (g/cm3) Hardness (HRA) TRS (MPa) YG6 14.95 90.5 1900 YG6X 14.95 91.5 1800 YG8 14.80 89.5 2200 YL10.2 14.50 91.8 2400 YG15 15.00 87.5 2800 YK05 14.85 90 2850 YG8C 14...

Miércoles 07 noviembre 2012

Cantidad : 100KG - Precio : 50-60USD/KG

Ubicación : Tianyuan District, Zhuzhou, Hunan, China, 412000, 412000 Zhuzhou, Persona a contactar : Elanie Wang, 86 15886366906

Miércoles 07 noviembre 2012

Cantidad : 1-500KG - Precio : 50-60USD/KG

Carbide Drawing Die Properties of grade Grade Density (g/cm3) Hardness (HRA) TRS (MPa) Average Grain size (ųm) YL01 15.25 93.5 3300 0.8 YL10.2 14.5 92.0 4000 0.8 YG6 14.95 90 2400 1.6 YG6X 14.95 91.5 1900 1.0 YG8 14.75 89.5 2800 1...

Miércoles 07 noviembre 2012

Cantidad : 1-500KG - Precio : 50-60USD/KG

Carbide Drawing Die Properties of grade Grade Density (g/cm3) Hardness (HRA) TRS (MPa) Average Grain size (ųm) YL01 15.25 93.5 3300 0.8 YL10.2 14.5 92.0 4000 0.8 YG6 14.95 90 2400 1.6 YG6X 14.95 91.5 1900 1.0 YG8 14.75 89.5 2800 1...

Miércoles 07 noviembre 2012

Cantidad : 1-500KG - Precio : 50-60USD/KG

Carbide Brazed Tip Properties of grades and application recommended. Grade Density (g/cm3) Hardness (HRA) TRS (MPa) K10/YG6X 14.95 91.5 1800 K20/YG6 14.95 90.5 1900 P10/YT15 11.4 91.5 1600 P20/YT14 11.6 90.8 1700 P30/YT5 12.9 90.5 2200...

Miércoles 07 noviembre 2012

Cantidad : 500KG - Precio : 50-60USD/KG

Grade Density (g/cm3) Hardness (HRA) TRS (MPa) K20 14.95 90.5 1900 K30 14.80 89.5 2200 YL10.2 14.50 91.8 2400 K40 15.00 87.5 2800 Solid rods without hole Article number D (mm) Dia. Tolerance (mm) L(mm) L. tolerance (mm) GZ0425 3-30 +0...

Miércoles 07 noviembre 2012

Cantidad : 100KG - Precio : 50-60USD/KG

◆We produce according to customer's request. Properties of grades Grade Density (g/cm3) Hardness (HRA) TRS (MPa) Average Grain size (ųm) YG6/ K20 14.85～15.05 ≥90.5 ≥1860 In YG8/K30 14.60～14.85 ≥89.7 ≥2060 In YK08/K40 14.50～14.80 ≥88.0 ≥2060...

Miércoles 07 noviembre 2012

Cantidad : 1-500KG - Precio : 50-60USD/KG

Percussive Drill Bit Properties of grades Grade Density (g/cm3) Hardness (HRA) TRS (MPa) YG11C 14.40 87.00 2850 YK15 14.60 87.6 2700 YK15.6 14.6 87.6 2700 YK20 14.52 87.3 2650 YK20.2 14.45 88 2700 YK25.6 14.58 87.5 2650 Application...

Domingo 28 octubre 2012

Cantidad : MNQ 3000 p - Precio : USD 3.2/pc

Cutting Board with Knife Sharpening Unit Features: 1. High quality Antibacterial board. 2. Cutting board with sharpening unit. 3. Carbide sharpener for quick and effective sharpening. 4. Various sizes. Description: Extremely convenient for your kitchen knives! 1. A bamboo...

Domingo 28 octubre 2012

Cantidad : MNQ 4992 p - Precio : USD 1.7/pc

Pocket Knife Sharpener, carbide sharpening blade & ceramic sharpening rod Widely used for kithen knives, chef' knives, Product Features: Crossed carbide blades provide quick edge setting. Crossed ceramic rods provide a razor sharp edge. Preset sharpening angles ensure best results...