Algomtl
svgfair.com
 
Carbide saw tips
Detalle
China Materias primeras
Materias primeras

Carbide saw tips

Cantidad : 100KG   Precio : 50-60USD/KG


◆We produce according to customer's request.

Properties of grades

Grade
Density
(g/cm3)
Hardness (HRA)
TRS
(MPa)
Average Grain size
(ųm)
YG6/ K20
14.85～15.05
≥90.5
≥1860
In
YG8/K30
14.60～14.85
≥89.7
≥2060
In
YK08/K40
14.50～14.80
≥88.0
≥2060
Coarse
JX5/K20
14.65～14.85
≥90.0
≥2060
In
YG6X/K10
14.70～14.85
≥91.7
≥1860
Fine
YG8X/K10
14.60～14.85
≥91.0
≥2000
Fine
K10S
14.70～14.85
≥91.7
≥3000
Fine
K20S
14.60～14.80
≥91.0
≥3000
Fine
K10UF
14.70～14.95
≥93.0
≥3000
Superfine
K20UF
14.50～14.80
≥92.0
≥3000
Superfine
K30UF
14.25～14.55
≥91.0
≥3050
Superfine
R06
14.70～14.85
≥93.5
≥2400
Superfine
R03
14.90～15.10
≥94.0
≥2000
Superfine
YC40
12.80～13.30
≥89.5
≥1700
In
YC501
12.70～13.30
≥90.5
≥1680
In
Application recommended

Grade
Applications recommended
YG6/ K20
For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high
YG8/K30
For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high
YK08/K40
For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high
JX5/K20
For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high
YG6X/K10
For the cutting of the wood specially, recommend to use the high frequency welding
YG8X/K10
For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding
K10S
For the cutting of the hard wood specially, Recommend to use the high frequency welding
K20S
For the cutting of the aluminum specially, Recommend to use the high frequency welding
K10UF
For the cutting of the plywood、board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding
K20UF
For the cutting of the aluminum specially, Use the high frequency welding
K30UF
For the cutting of the stones specially, Use the high frequency welding
R06
For the cutting of the plywood、density board and the sandwich board, Use the high frequency welding
R03
For the cutting of the timber such as shaving board、laminated boar、density board and compound material etc, Use the high frequency welding
YC40
For the cutting of the large cast materials, Recommend to use the high frequency welding
YC501
For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding
Ubicación : Tianyuan District, Zhuzhou, Hunan, China, 412000, 412000 Zhuzhou,
Persona a contactar : Elanie Wang, 86 15886366906

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Carbide saw tips

Buscar en la categoria : Materias primeras
Buscar en la categoria :
tips, carbide
Francia 311400 B2B Servicios
Electric Pressure Cookers

Viernes 28 abril 2023

ZHANG XIAOQUAN electric canning pressure canner has the internal liner that is composed of rust resistance,anti-wear layer, aluminum alloy thermal conductivity layer, high cohesion internal coating and non-adhesive coating layer,so it has a good thermal conductivity and durability...

Zhang xiaoquan Inc.

  • 311400 - Hangzhou
  • +15 2 21 95 51 68
Indonesia 90125 B2B Servicios
Genuine Printhead XAAR 500/80pl

Sábado 08 mayo 2021

Cantidad : 100 - Precio : 640,00 €

Genuine Printhead XAAR 500/80pl To be used with: MYJET LA3208XR,MYJET LA3204XR, MYJET LB3204XR, MYJET LB3208XR, MYJET WD3212XR, MYJET WD3216XR, LIYU PE3204-XR382, LIYU PE3208-XR382, SMART PROTON 8H, Wit-color Ultra2000 H4/H6, WIT-COLOR ULTRA2000 H8, WIT-COLOR ULTRA2000 H12, WIT-COLOR...

Printpartin

  • 90125 - Makassar
  • +62 4 11 43 75 03
Italia 62012 Varios / Descuento
Monocomponent Polyurethane Adhesive for Sticking Leather On Soles

Jueves 25 mayo 2017

POLYURETHANE ADHESIVE WITH MEDIUM-HIGH VISCOSITY Neoplastic ABR is a monocomponent polyurethane adhesive suitable for sticking leather and synthetic materials on soles. It can be reactivated at about only 50° C. It is possible to increase performances adding activator Desmodur (5%)...

FAC GB Srl

  • 62012 - Civitanova Marche
  • 00390733898525
 
Pago seguro

Informations

Les plus recherchés