FLANGED - 270 Anuncios

Viernes 08 diciembre 2017

Tianjin Union Co., Ltd valve.yummy at foxmail dot com Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer,Rubber joint Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture...

Viernes 08 diciembre 2017

Tianjin Union Co., Ltd (IMGV) valve.yummy at foxmail dot com We can produce swing check valve, double plate wafer swing check valve, female screw swing check valve, API forged steel check valve, power station check valve, API cast steel check valve so on. 1. Size: 2"~82" 2. Connection: ASME B16...

Viernes 08 diciembre 2017

Tianjin Union Co., Ltd valve.yummy at foxmail dot com Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352...

Jueves 30 noviembre 2017

Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352, BS5163,BS5150, ANSI B16.34, API600, API6D,API609...

Jueves 30 noviembre 2017

1/2/3 PCbody Ball Valve Material: SS304, SS316, CF8, CF8M, DIN1.4408 Size: From 1/4" to 4" Temperature Range: -60 to 450°F Working Pressure: 1000PSI Blow-out proof stem Connection Ends: Threaded (Female/Female), Butt welded, Socket welded (BW, SW)，Flanged end Thread standard: NPT, BSPT...

Viernes 24 noviembre 2017

- Check Valve - 1. Size: 2"~36" 2. Connection: ASME B16.10 3. Certifications: API600, BS1868 4. Standard: DIN GB ISO JIS ANSI 5. Material: WCB,CF8M,CF8,CF3,CF3M 6. Working Pressure: Class150LB~Class2500LB 7. Flanged End: ≤24" to ASME B16.5, ≥26" to ASME B16.47 Series A 8. Short...

Sábado 28 octubre 2017

22mm Expanded Grating is similar to 13mm Expanded Grating, it is 22mm thick also with flanged and knurled surface. 22mm expanded walkway is formed from 236mm width and 22mm height profile, after knurling and perforating and expanding, 22mm height and 600mm width expanded walkway is formed...

Miércoles 18 octubre 2017

Characteristics ST-Type Strainers are designed according to the fluid flowing, therefore it can be used for various choice. Using flanged, socket and butt welded connection mode can save the tubing material. The connection mode of A, B, C, D can be used for each kind of pipeline system equipment...

Miércoles 18 octubre 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

Brief Introduction. YB43X is Proportion type pressure reducing valve,as its floating piston ends have different cross-sectional area,there will be a fixed pressure differential between the valve inlet and outlet,thereby change the outlet pressure conditions,achieve the purpose of decompression...

Miércoles 18 octubre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Miércoles 24 mayo 2017

Cantidad : 1

Product: Bimetallic steam trap Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it...

Miércoles 24 mayo 2017

Cantidad : 1

Product: Capsule- type Steam Trap Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Standard screwed: NPT GOOLE Thermostatic Steam Traps are available with balanced-pressure...

Viernes 02 diciembre 2016

Cantidad : 1 - Precio : 19,00 €

Flange bushing is a metal powder as the main raw material, oil bearing and oil can be used for a long time, commonly used in refueling inconvenient occasions. This bearing was invented in the early twentieth Century, because of its low cost, easy to use, has been widely used, has...

Viernes 25 noviembre 2016

Cantidad : 10000000 p - Precio : 1 000,00 €

Revestidos en ceramica de ceramica cocida tubo tubo reductor es integralmente moldeado especial de cerámica, con un relleno de verter dentro de la tubería reductor montado.Tubo ajustable tubo revestido de ceramica ceramica colocada en el contenido de alúmina de no menos de 95%.200T...

Viernes 25 noviembre 2016

Cantidad : 10000000 p - Precio : 1 000,00 €

Revestidos en ceramica de ceramica cocida tubo tubo reductor es integralmente moldeado especial de cerámica, con un relleno de verter dentro de la tubería reductor montado.Tubo ajustable tubo revestido de ceramica ceramica colocada en el contenido de alúmina de no menos de 95%.200T...

Viernes 25 noviembre 2016

Cantidad : 10000000 p - Precio : 1 000,00 €

Acero de alta aleación de níquel - cromo tubo compuesto complejo por la pared exterior y el forro interior es de 5 - 12mm Thick wall Seamless Steel Pipe, recubierto de cromo de alta aleación de níquel 6-25mm gruesa, centrifuga de composite de tubo recto, tubo de vacío forjado en negativo...

Viernes 25 noviembre 2016

Cantidad : 1000 - Precio : 1 000,00 €

Steel - High-chromium-nickel alloy composite pipe complex by the outer wall and the inner liner is made of 5-12mm thick wall seamless steel pipe, lined 6-25mm thick high-chromium-nickel alloy, centrifugal composite made of straight pipe, pipe vacuum negative forged, the product takes...

Viernes 25 noviembre 2016

Cantidad : 11111111 p - Precio : 1 000,00 €

Revestimiento cerámico compuesto tuberia, tuberia de acero revestidas de cerámica composite Tubería de acero revestidas de cerámica compuesto por dar pleno juego a la alta resistencia, buena dureza, resistencia al impacto, buena soldabilidad y corindón de alta dureza, alta resistencia...

Viernes 25 noviembre 2016

Cantidad : SHS Cerami - Precio : 1 000,00 €

SHS - Self - Igniting Alumina Ceramic Composite Pipe es el National "863" programa en el campo de los nuevos materiales y la aplicación con éxito de la industrialización de alta tecnología de logros.Los productos son de corindón (A - Al2O3) Ceramica capa intermedia, tres capas de...

Martes 27 septiembre 2016

Precio : USD$50/piece

Origin: Henan, China (Mainland) Brand: Dashan Model: OEM Type: Flanged Material: Brass/Bronze Processing type: Casting Machine type: Cone crusher Use: Ore mining Feature: High wear resistance OEM: Yes Drawing: Yes Datail: Superior and Fine surface finished Size: Customized...

Viernes 23 septiembre 2016

Precio : USD$50/piece

Origin: Henan, China (Mainland) Brand: Dashan Model: various Type: Sleeve Material: Copper Copper alloy: Brass, bronze, lead bronze Size: OEM Condition: New Processing: CNC Machining Processing Type: Machined Accessories Samples: Available Customized: As drawing Weight...

Miércoles 14 septiembre 2016

Cantidad : 500 - Precio : 50,00 €

Swing Check Valve DIN Standard Swing Check Valves (DIN 3202 F6 ,DIN 3202 F1) DIN F6 Swing check valve DIN F1 Swing check valve DIN Rückschlagklappe DIN Válvula de retención clapeta oscilante DIN Zpětná klapka stavební délka dle DIN EN558-1 serie 48 & serie 1 DIN Standard...

Miércoles 14 septiembre 2016

Cantidad : 500 - Precio : 50,00 €

Lift Check Valve DIN Standard Lift Check Valve DIN Lift check valve DIN Rückschlagventil mit innenliegender Schliessfeder DIN Válvulas de retención de tipo pistón DIN zpětný ventil DIN Standard tilbakeslagsventil med fjærbelastet kjegle DIN Standardında Kumandasız Çek Valf...

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Gland Packing Globe Valves ( Straight- Through Type) DIN Standard Gland Packing Globe Valve DIN Globe valve DIN Stop valve DIN Absperrventil Durchgangsform DIN Válvulas de globo DIN ventil uzavírací s klasickou ucpávkou přímý DIN Standard seteventiler med pakkboks (rett løp...)

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 100,00 €

Bellows Seal Stop Valves (Angle Type) DIN Angle Type Bellows Sealed Stop Valve DIN Bellows Seal Globe Valve DIN Faltenbalgventil Eckform DIN Válvulas de fuelle（Paso angular.） DIN ventil uzavírací s vlnovcem rohový DIN Standard seteventil med belg (Vinkel modell) DIN Standardında...