HARMONIC - 424 Anuncios

Viernes 09 diciembre 2022

Cantidad : 100

With a curved ultrasonic cutting blade, BBT Medical harmonic cutter 36cm is compatible with BBT Medical ultrasonic surgical system Generator 55.5Khz, Also other mark Generator in the market. The curved head structure design increases the effective anatomical length of the harmonic...

Viernes 09 diciembre 2022

Cantidad : 100

Different lengths of focus harmonic scalpel meet the needs of different types of harmonic surgery. The weight is only 120g, which is conducive to the flexible operation of 360 degrees without dead Angle. Its function is mainly used for the cutting of soft tissues and the coagulation...

Viernes 09 diciembre 2022

Cantidad : 100

Its function is equivalent to TM-SURE ultrasonic scissors depending on the user's usage habits, and its curved tip design provides greater visibility to surgeons during surgery. Also, the powerful clamp design of the ultrasonic scalpel reduces the possibility of tissue slippage and...

Viernes 09 diciembre 2022

Cantidad : 100

BBT Medical ultrasonic scalpels are mainly used for soft tissue cutting and coagulate blood vessels less than 5mm in laparoscopic surgery. Available in 4 shaft lengths 45cm,36cm,23cm and 14cm for you choose. Superior to electrosurgery in that it can cut through soft tissue, creates...

Viernes 09 diciembre 2022

Cantidad : 100

This system is composed of the generator, transducer, and scalpel. And the generator converts electrical energy into mechanical energy through the piezoelectric ceramic sheet in the handle, so that the jaw oscillates at 55.5KHz, and the vibration amplitude is 50μm-100μm. The oscillating...

Viernes 09 diciembre 2022

Multi function energy meter refers to the watt-hour meter which has more than two functions, such as time-sharing and measurement demand, in addition to measuring active power (reactive power), and can display, store and output data, and has powerful data acquisition and processing functions...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG-II series flex spline belongs to a cup-shaped standard structure and its input shaft connects with the inner hole of the wave generator through Oldham coupling. Generally, the circular spline is fixed and the flex spline does output. Features Of HMCG-Ⅱ Series Unit Harmonic Drive...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMHG-IV series flex spline belongs to the hollow flanging standard structure. The wave generator cam has its own Input shaft and there is a support bearing inside the reducer The reducer is fully sealed and easy to install, especially suitable for the situation where there is a need...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMHG-V Series with hat-combination standard structure. The input shaft can connect with the motor directly. The cable can go through the low-speed hollow shaft Encoder can be installed on both input and output shafts Especially for Cobot and Joint modular Features of HMHG-V Unit (Hollow ...)

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG Series is cup type of harmonic drive, it has the characteristics of compact and concise design, no backlash, input and output coaxial, excellent in positioning and rotation accuracy. HMCG Series Harmonic Drive Cup Type List HMCG-Ⅰ Series Component Harmonic Drive HMCG-I high torque...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG-I consists of three basic components: flexible gear, rigid gear, and wave generator. The flexible gear is a cup-shaped standard structure, and its input shaft directly cooperates with the inner hole of wave generator and connects with it through flat key or fastening screw."...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG-II-E series flex spline is a cup-shaped standard structure, input shaft connects with the wave generator inner hole directly fixed through a flat key connection. Generally, the circular spline is fixed, and the flex spline is connected to the output end. Features of HMCG-Ⅱ-E...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCD-II series, with a commitment to lightweight and compact size of harmonic gear transmission, not only inherits the advantages of traditional products, but also realizes bold shape design based on the market demands. The overall machine adopts a super-flat structure that is light and compact...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCD is Ultra-flat harmonic drive china, with characteristics as compact and lightweight, input and output coaxial, excellent positioning accuracy and rotation accuracy. HMCD Series Harmonic Drive Cup Type List HMCD-Ⅱ Unit (Super Flat) Series Harmonic Drive HMCD-II is a highly compact...

Jueves 08 diciembre 2022

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, Han's Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously improves and innovates in the...

Sábado 19 noviembre 2022

The LSS series of micro harmonic reducers can be divided into two models depending on the different used harmonic waveform generator: LSS-I (uni-body type wave generator) and LSS-II (cross slider type wave generator). We provide 6 different sizes with 5 kinds of speed reduction ratios...

Sábado 19 noviembre 2022

The LSD series small harmonic drive is a newly developed strain wave gear/drive series based on the LSS series to fulfil the needs of the market. This type of mini harmonic drive only uses a uni-body type wave generator. Compared with the LSS series, the lsd gearbox is more compact...

Sábado 19 noviembre 2022

The LHT Series of hollow output shaft gearbox use hat type flex spline. We can divide the LHT drive actuators into 5 versions, LHT-I, LHT-II, LHT-III, LHT-IV and LHT-V. Differences Among Different LHT harmonic reducer: LHT-I: use uni-body type wave generator LHT-II: cross slider...

Sábado 19 noviembre 2022

LHD series's flex spline is a flanging ultra-short tube structure. The connection can be fixing the circular spline, flex spline as output; or fixing flex spline, circular spline as output. Without changing products' performance, LHD-I's axial length shortens 50%, LHD-III shortens 15%...

Sábado 19 noviembre 2022

Why do robots use robotic speed reducer but not ordinary reducer? Because the robot requires a small size and high precision. Only the harmonic reducer can reach high precision, small gap, large deceleration ratio, and small size. In line with the needs of small and medium-sized robot...

Sábado 19 noviembre 2022

Laifual Drive's products have high durability and precision. Our customized solutions will allow you to obtain top performance and minimize the overall machine costs. The Relationship Between Power Laifual Drive Gearboxes and Paper Making Industry The requirements for today's paper...

Martes 15 noviembre 2022

Acrel power quality device is mainly used for power supply and distribution equipment at the user end, and provides power quality improvement equipment (such as active filters, reactive power compensation equipment, etc.) to help improve user power quality and make users more economical...

Martes 15 noviembre 2022

As a specialized energy meter supplier, Acrel provides various programmable energy meter types for sale. Acrel Power Meters and Energy Management system is in accordance with the needs of users, in accordance with the standard specifications of the distribution system and developed...

Martes 15 noviembre 2022

Acrel Electrical Monitoring & electric meter protection Device provide solutions for 0.4kv-35kv power distribution system, which include programmable panel energy meter, dc energy meter, remote terminal unit, smart motor protector relay, temperature and humidity controller, medium...

Jueves 20 octubre 2022

A device for controlling the amplitude of the shaft of an ultrasonic scalpel. The amplitude is 55.5Khz±2Khz. Convert electrical energy into mechanical energy. It solves the technical problem that the amplitude of the existing ultrasonic scalpel shaft changes with the load and causes...

Jueves 20 octubre 2022

With a curved ultrasonic cutting blade, BBT Medical harmonic knife 36cm is compatible with BBT Medical ultrasonic surgical Generator 55.5Khz, Also other mark Generator in the market. The curved head structure design increases the effective anatomical length of the harmonic cutter...

Jueves 20 octubre 2022

Different lengths of focus harmonic scalpel meet the needs of different types of harmonic surgery. The weight is only 120g, which is conducive to the flexible operation of 360 degrees without dead Angle. Its function is mainly used for the cutting of soft tissues and the coagulation...

Jueves 20 octubre 2022

BBT Medical ultrasonic scalpels are mainly used for soft tissue cutting and coagulate blood vessels less than 5mm in laparoscopic surgery. Available in 4 shaft lengths 45cm,36cm,23cm and 14cm for you choose. Superior to electrosurgery in that it can cut through soft tissue, creates...

Jueves 20 octubre 2022

This ultrasonic surgical systems is composed of the generator, transducer, and scalpel. And the generator converts electrical energy into mechanical energy through the piezoelectric ceramic sheet in the handle, so that the jaw oscillates at 55.5KHz, and the vibration amplitude is 50μm-100μm...

Martes 27 septiembre 2022

Cantidad : 2000sets/m - Precio : 200-588USD

The LSS series of micro harmonic reducers can be divided into two models depending on the different used harmonic wave generators: LSS-I (uni-body type wave generator) and LSS-II (cross slider type wave generator). We provide 6 different sizes with 5 kinds of speed reduction ratios...