SHRINKAGE - 881 Anuncios

Miércoles 26 julio 2023

Overmolding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product...

Miércoles 26 julio 2023

Insert Moulding Design USM molds focus on structural parts injection molds, gas-assisted and water-assisted injection mold, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product...

Miércoles 26 julio 2023

Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas assist molding; The product wall thickness of water-assisted...

Miércoles 26 julio 2023

The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially...

Miércoles 26 julio 2023

Cantidad : Per Order - Precio : $0.1-$200

The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is easy...

Miércoles 26 julio 2023

The horizontal flow wrap machine is an automatic continuous shrinkage packaging equipment, which is characterized by the fast temperature rise of the sealing knife, good stability, and low maintenance cost. The shrinkage temperature and motor transmission speed of our horizontal...

Miércoles 26 julio 2023

GNS-5030LW high-speed fully automatic shrink tunnel machine is a high-speed constant temperature shrinkage packaging machine independently developed and designed by Guonuo. This automatic heat shrink packaging machine series has the advantages of reasonable price, high efficiency...

Sábado 22 julio 2023

Cantidad : 30 sets of - Precio : $1,000-$10,000

Die Casting Mould Die casting mould is a method of casting liquid die forging. It is a process completed in a special die casting moulding machine. The major advantage of mould die casting is that thousands of castings can be produced quickly by die casting mould supplier, die casting...

Sábado 22 julio 2023

Cantidad : 30 sets of - Precio : $1,000-$10,000

Electronics Product Part With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many...

Sábado 22 julio 2023

Cantidad : 30 sets of - Precio : $1,000-$10,000

Die Casting Mould Die casting mould is a method of casting liquid die forging. It is a process completed in a special die casting moulding machine. The major advantage of mould die casting is that thousands of castings can be produced quickly by die casting mould supplier, die casting...

Viernes 14 julio 2023

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA 6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Viernes 14 julio 2023

PA6 GF30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA 6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat...

Viernes 14 julio 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Viernes 14 julio 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Viernes 14 julio 2023

PA66GF50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66 GF50 (A2011J) PA 6.6 GF50 HB grade is applied...

Miércoles 12 julio 2023

Precio : 2.4-2.9$/kg

What Is Stabiliser 466? Description Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products....

Jueves 06 julio 2023

Precio : USD0.1-15

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Jueves 06 julio 2023

INDUSRIAL CHILLER MACHINE BY SOXI Soxi is one of the top industrial chiller machine manufacturers in China. Industrial water chiller system plays an important part in the plastic moulding process, injecting frozen water into the flow channel inside the mold, cooling the mold through...

Jueves 06 julio 2023

Industrial Needle Punched PET Spunbond Non-Woven Fabric Industrial PET spunbond non-woven fabric has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation of the polyester spunbond nonwoven...

Miércoles 05 julio 2023

Cantidad : 130-140 To - Precio : USD 1.5-6.0 / kgs

It has high puncture resistance, good shrinkage and elongation. During the shrinkage process, the film can not produce holes. Because the shrink film is often suitable for outdoor use, UV anti-ultraviolet agent needs to be added. It has the advantages of strong toughness, high elasticity...

Miércoles 05 julio 2023

Cantidad : 130-140 To - Precio : USD 1.5-6.0 / kgs

The high-brightness base film is a three-layer co-extruded biaxially stretched polyester film with excellent optical properties such as high gloss and high transmittance. Features: high transparency, high gloss, suitable shrinkage and excellent processing performance Conventional thickness...

Miércoles 05 julio 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. Double Heads Large CNC EDM Machine Highlights 5th generation EDM machining...

Miércoles 05 julio 2023

UHPC is a new type of cement composite material with good mechanical properties, good durability and good volume stability. Compared with traditional reinforced concrete structures, UHPC structure life can be doubled. The Advantages of SDS-1835 0.18mm-0.35mm Diameter 13±1mm Copper...

Miércoles 05 julio 2023

Micro steel fiber are made of copper-coated steel wire. Micro steel fiber wire is one of most important material of RPC and UHPC. UHPC has high strength, high toughness, very good durability and volume stability. This micro steel fiber is an excellent new building material. Micro...

Jueves 29 junio 2023

Precio : $850~$2000 / ton

As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But native copper is rarely to be used, it usually exists to be a copper-based alloy so that the other elements can help greatly reduce the casting defects...

Miércoles 28 junio 2023

Precio : 100USD

Custom high Precision Compression/bulk molding compound manufacturing with fast lead time BMC/SMC Mould Manufacturer We mainly use bmc injection molding and pressure molding as the methods. When designing the flow channel and parting surface, we think that the cavity pressure should...

Miércoles 14 junio 2023

Precio : 0.01-1000

If you need to handle the materials, no matter vertical lift, horizontal movement, or 360-degree rotation movement, you can find idea material handling equipment and tools at TITANSUHE to move, control, and store your materials. As a professional material handling equipment factory...

Jueves 01 junio 2023

There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fiber make concrete have extremely high flexural...

Jueves 01 junio 2023

Dipped Polyester Yarn is widely utilized in a variety of sectors to make industrial sewing threads, fishnets, ropes, and mechanical rubber items. The offered yarn is well suited for stitching and weaving applications and is produced using premium fibers. This polyester yarn's main...

Jueves 25 mayo 2023

Precio : 100USD

2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years...