SDS-1823 0.18-0.23mm Diameter 13±1mm Length Copper Micro Steel Fiber

Micro steel fiber are made of copper-coated steel wire. Micro steel fiber wire is one of most important material of RPC and UHPC.

UHPC has high strength, high toughness, very good durability and volume stability. This micro steel fiber is an excellent new building material. Micro filament steel fibers are currently widely used in high-speed railways, highways, RPC cover plates and UHPC buildings.

The Advantages of SDS Micro Steel Fiber

Good dispersion in concrete;

Less impact on UHPC liquidity;

Improving the toughness of concrete;

The brass fibers provides good impact, fatigue, shrinkage control and ductility in all grade concretes;

USER'S GUIDANCE

Dosage: depend on the application and minimum dosage is 120kg/㎥-200kg/㎥

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the evenly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-01823 0.18-0.23mm Diameter 13±1mm Length Micro Steel Fiber

Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.

Packaging: 20kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.

There are many concrete fiber manufacturers, but we are one of the best choices for you.