Materias primeras

Addition cure liquid silicone rubber raw material for mold making

Cantidad : 1kg   Precio : 10,00 €

1.Description of addition cure liquid silicone rubber

G-830 silicone rubber platinum cure silicone rubber. The silicone rubber will be cured under room temperature and can be cured fastly by heating, It's two-components liquid silicone rubber , the mixing ratio is 1: 1 . It has an exceptional fluidity and good operability.Especially ,the platinum cure silicone rubber has a lower shrinkage,higher temperature resistance and it is flexible.

2.Characteristics of addition cure liquid silicone rubber

(1).An exceptional fluidity and good operability
(2).Good tensile strength and tear strength
(3).Food grade silicone rubber

(4).high temperature resistance
(5).good flexibility

(6).No smell ,non-toxic

(7).long shelf-time &lifetime

(8).Lower shrinkage

3.Application of addition cure liquid silicone rubber

G-830 silicone rubber is flexbile silicone rubber ,it has a higher temprature resistance and lower shrinkage, so it is suitable to make the silicone gasket for machine sealing .

4.Datesheet of addition cure liquid silicone rubber

Item No.

Appearance

Hardness (shore A°)

Viscosity (CPS)

Tensile-strength

( kgf /cm2 )

Tear-strength

(kgf /cm2 )

Elongation-break

(%)

Mixing ratio

operation

time (25 )

Curing time( 25 )

Shrinkage

G-830

translucent

30±2

7000±1000

55

24

450

1: 1

20-30 mins

2~3 h

0.1%

Using instruction

1. Place a plastic container on a small scale, making sure to zero out the weight on the scale. Note: use a container that, during rise under vacuum in Step 5, will allow for material to expand to 4-5 times its resting volume.

2. Pour catalyst into the plastic container, noting weight of material poured.

3. In the same container, pour an equal weight of base on top of the catalyst (e.g., 100 grams of catalyst and 100 grams base). Note: within a 5% weight variance, the end result is not altered.

4. With a clean, dry mixing spatula, mix energetically until the color of the product is homogeneous. Note: working time begins at this step. Mixing should take no longer than 1-2 minutes.

5. Place container under vacuum and vacuum until material bubbles and rises. Release vacuum and repeat until bubbles are removed. Vacuuming should take no longer than 3-4 minutes.

6. From a height of approximately 30 cm, pour the mixed silicone into the mold frame. Maintain the pouring stream in the same spot so as to minimize introduction of air bubbles into the mold.

7. Allow the mold to sit, undisturbed, for at least 4 hours to ensure the silicone is fully cured.

8. Remove the mold from the frame.

9. Cut around the pattern carefully to release it from the silicone rubber mold.

Notice

The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.

Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.

Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).

Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:

-Natural or synthetic rubber, vulcanized with sulphur derivatives.

-Poly-condensation RTV catalyzed with metallic salts.

-PVC stabilizing agents.

-Amine cured epoxies.

-Sulphur, tin and amines derivatives.

-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.

Packaging & Shipping

Packing:

20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B

25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B

200KG/drum packing for part A +200KG/drum packing for part B

Why Choose Us?

1.Free Sample

2.Sample Test

3.Technical Support

4.Engineers Site Instruction

5.New products developing

6.New Market developing

7.Factory Visiting Reception

8.China visiting reception

9.China Latest silicone news

10.Related Products Purchasing Assistance

11.More than 8 years experience in producing liquid silicone rubber

Ubicación : NO.4 ng street , the 2nd industrial district of xiaobian ,changan town ,dongguan China., 523000 Dongguan,
Persona a contactar : Sybil Gan, 86 0769 85303932

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Addition cure liquid silicone rubber raw material for mold making

Buscar en la categoria : Materias primeras
Buscar en la categoria :
mold, liquid, addition, material, silicone, rubber, cure
Turquía 06380 Muebles
AKSAPARK | Juegos infestiles y mobilario urbano

Jueves 29 octubre 2015

aksapark, que ha venido trabajando en el diseño y fabricación de mobiliario urbano y juegos infantiles desde que fue establecido en 1996, ofrece productos de alta calidad y servicio, tanto en Turquía y en otros 50 países de todo el mundo, fabrica sus productos que se pueden utilizar...

Aksapark Kent Mobilyaları

Hong Kong 999077 Audio / video
JVC Everio GZ-GX3 HD Memory Camcorder PAL

Jueves 01 agosto 2013

Cantidad : moq:1pcs - Precio : USD594

Get stunning images with this High-spec Full HD Memory Camcorder, capable of 1920x1080/50P recording and loaded with F1.2 Super Bright & 29.5mm Wide Angle JVC HD GT LENS and Back-illuminated CMOS Sensor. Built-in Wi-Fi allows Live Monitoring via Smartphone, videos and stills to be emailed...

AC Electronic Ltd

  • 999077 - HongKong
  • +85 2 23 25 18 67
  • +86 13501567844
Francia 59590 B2B Servicios
Y STRAINER

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935