Aluminum paste for Autoclaved Aerated Concrete

Aluminum Paste for AAC

GLS-65 GLS-75

1. Brief Introduction of Aluminum Paste for AAC

1) AAC Aluminum powder is one of the necessary raw material to make AAC Blocks

2) For each cubic meter AAC block, it consumes 0.5kg Aluminum powder.

3) 65% purity of Aluminum powder are mostly used in AAC block making industry.

2. Parameters of Aluminum Paste for AAC

3.Storage Condition of Aluminum Paste for AAC

1. Products should be stored in a dry, ventilated, cool room.

2. Should be separated from fire, heat, rain and sun, and forbid to mix together with water, acid, alkali, lime, cement, and other oxidants and corrosion products.

3. Products should be ready to use, and timely sealing, to avoid deterioration oxidation.

4. It can be putting out fire by yellow sand, dry lime, talc, sodium chloride.

5. It is forbidden to put out a fire by water and fire-extinguisher. Hydrogen will be produced because the contact of water with high temperature aluminum powder.

6. The dry powder with ejection pressure will mix the aluminum powder with air, thereby increasing combustion.