Amphoteric Flocculants
SINOFLOC amphoteric flocculants are partially hydrolyzed polyacrylamide with high molecular weight. This amphoteric polyacrylamide is easily to remove both the positive and negative charged contents particles in a suspension solution.
Amphoteric Polyacrylamide (PAM) Specifications
Products |
Product Code |
Cationic Charge |
Anionic Charge |
Molecular Weight |
Amphoteric PAM Powder |
SINOFLOC 502 |
Low |
Medium |
High |
Amphoteric polyacrylamide also called zwitterionic polyacrylamide or dipolar ionic polyacrylamide. The molecular chain of the amphoteric flocculant has two or more functional groups, of which have at least one anionic charge and one cationic charge. Unlike other mono-ionic polyacrylamides that only form either a cationic or anionic charges, the amphoteric polyacrylamide simultaneously have both ionic states.
Zwitterionic polyacrylamide is copolymerized by acrylic cationic monomer and acrylamide monomer. The anionic charge forms after the hydratization of the acrylamide monomer, and the cationic charge forms from the acrylic monomer. Thus, the amphoteric polyacrylamide has both positive and negative charges on its molecular chain.
Main applications of Amphoteric Flocculants
SINOFLOC amphoteric flocculants could be used for municipal wastewater treatment and industrial wastewater treatment. Our products have both anionic and cationic charges on the same macromolecule and could be used to remove both positively and negatively charged contaminant in suspensions.
1. Industrial water treatment
Amphoteric polyacrylamide has been widely used for industrial water treatment, oil refinery plants and mining etc. Amphoteric polyacrylamide has a better performance and efficiency than the mono-ionic polyacrylamide, especially when the water condition is complicated, or the water condition is keep changing, because its ability to decrease the surface tension of the water is way better. And the performance is stable when the water condition changes.
In some special cases, it usually needs to use anionic flocculants and the cationic flocculants synchronously to reach a better effect of the clarification, however, these added anionic flocculants and the cationic flocculants could react with each other and form precipitation and then lead a poor flocculate result. The amphoteric flocculants could easily avoid the problem due to its zwitterionic nature. It could create both charges without casing precipitation. And it's even easier to operate during the treatment, time saving and labor saving.
2. Municipal water treatment
As the municipal waste water also has more and more complicated composition, the sludge dewatering requires a higher performance agent. At this circumstance, the simply cationic flocculants is not suitable any more, instead many tests and feedbacks show the amphoteric agent works very well.
3. Oilfield
The newly developed application is for the oilfield, facts prove that amphoteric polyacrylamide could be used for profile control, water plugging, friction reduction and also the treatment for the fluid.
Packaging - Storage
In 25 kg Kraft bags or PE valve bags or 750 kg big bags. The product should be kept dry place and the storage temperature is 0oC to 35oC, away from direct sunlight and moisture.
Products Feeding
The solutions of SINOFLOC amphoteric polymer must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC amphoteric polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on amphoteric flocculants, please consult with SINOFLOC team.
SINOFLOC has become a leading manufacturer and supplier of water-soluble polymers in China. We offer flocculant polyacrylamide pam, pam flocculant, pam polymer, anionic polymer, etc. Contact us to know more.
Persona a contactar : Chen Alex, 86 10 8055 6872
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Amphoteric Flocculants Buscar en la categoria : Materiales de ocasión Buscar en la categoria : flocculants, amphoteric |
Viernes 06 febrero 2015
Cantidad : 100MT/Mont
Chemical Name: (S)-2,6-Diaminohexanoic acid monohydrochloride~H-Lys-OH.HCl Structure Formula: Molecular Formula: C6H14N2O2.HCl Molecular Weight: 182.65 Cas No: [657-27-2] Characteristics: A white or nearly white free-flowing crystalline powder, practically odorless...
Zhaocounty Granray Bioproducts Co.,Ltd
- 051530 - NanBaiShe
- 8631180826581
Jueves 31 octubre 2024
Dual Piston Volumatical Filling Machine FP425. available for working independently on each system. Cylinder Volume can be customized based on customer's requirement. FEATURES: - Filling volume can be customized based on customer's requirement - Each piston system can be set independently...
Autopack Co.,Ltd
- autopacker
- 33454 - Taoyuan City
- +88 6 33 68 98 06
Miércoles 06 agosto 2014
Cantidad : 9999pcs - Precio : negotiation
Electric Butterfly Valve DN50; DN65; DN80; DN100; DN125; DN200; DN250; DN300; DN350; DN400; DN450; Type: AEV-F1 1.Power: DC24V-110/220V, AC24V-110/220/ 380V/50Hz 2.Torque of contribute axle: 200kg fm 3.Actuation range: 0-90degree 4.Action time: 15-30seconds 5.Protection settings...
Alertech Electronics(H.K.) Co.,Ltd
- hkalertech
- 999077 - Hong Kong
- +85 2 81 32 41 11