Automotive Mold

Large drop of automotive mold top and bottom; The mold manufacturing technology is complicated; The injection system is many and complicated; The mold cost is ver high.

AUTOMOTIVE MOLD TYPES

Automotive AC Air Outlet

The air outlets of automotive AC are generally assembled by multiple parts, classified according to their functions and purposes: there are exterior molds, functional molds, or both exterior and functional molds.

Automotive Mold Manufacturers

With over 15 years of experience in automotive mold development and production, USM will make mold flow analysis from the DFM report step to ensure that the pressure will be controlled at a reasonable range during injection, and there are no weld marks and other defects on the part surface.

Automotive Grille Mold

The part surface of the air intake grille generally has several treatment methods such as leather texture, sandblasting, paint spraying, and electroplating, the materials usually are PP, ABS, ASA, etc., and the surface of the bumper decorative grille is generally treated with leather texture and sandblasting, mainly PP material.

Automotive Door Mold

The plastic application in automotive is divided into interior parts, exterior parts, and functional parts. According to different material properties, plastics are usually divided into three types: general plastics, engineering plastics, and special plastics.

Auto Parts Mould

The automotive console is an external part in automotive interior parts, and no weld line on the part surface, the console's gating system generally uses a valve gate of hot runner system, the gate position usually has a direct injection gate on the non-critical surface which is to save plastic material, the shut-off area will be injected on side of the non-critical surface, or the middle area will be injected to the non-critical surface by the banana gate.

Automotive Molds Characteristics

1. The automotive mold size is very big, and the largest mold weight is nearly 40T;

2. The mold structure is complex;

3. There are many irregular curved surfaces on the parting surface.

If you want to know more about automotive mold technology, please visit our website.

As one of custom plastic mold manufacturers, we serve different industries, especially in the fields of water-assisted injection mold, gas injection mold, two-color mold (2k molds), multi cavity mold and pre-deformed mold with professional experience make us stand out in this industry.