Bimetal composite pipes
Cantidad : 1000 Precio : 1 000,00 €
Bimetal composite pipes takes carbon steel or low alloy steel pipe as base pipe and CRA pipe as layer or lining pipe， by patented technology and special equipment, it is produced in a special metallurgical or mechanical process to guarantee a tight bonding between base pipe and layer or lining pipe and combines strength of carbon steel or low alloy steel and corrosion resistance of CRA into one innovated pipe which is cost effective and reliable.
Bimetal metallurgically Clad Pipes
SunnySteel adopts unique solid-phase diffusion process to produce bimetal metallurgically clad pipe which has bond strength of at least 137.8Mpa (20000psi). It suits the applications with demanding requirements for special forming and constant temperature or pressure change. We can produce bimetal metallurgically clad pipes with outer diameter of 15mm～168.3mm and cut-length of 3～12m.
• Bimetal mechanically Lined Pipes
We produce bimetal mechanically lined pipes using unique hydraulic forming technique to achieve a perfect bond between base pipe and lining pipe. The great advantage of hydraulic forming technique is that the pressure can be distributed equally over the girth, therefore achieve a perfect bond. This process could minimize the surface damage of CRA lining pipe. By seal welding or bead welding, the end of lined pipe is convenient for site assembly. We can produce bimetal mechanically lined pipes with outer diameter of 15mm～1118mm and cut-length of 3～12m.
• CRA Longitudinally Welded Pipes
Our welding process is the most advanced way of producing welded pipes with a variety of specifications and materials such as stainless steel, nickel alloys, titanium alloys. We can meet customers' satisfaction in large-diameter, thin-wall, straightness, roundness and other technical requirements,guarantee corrosion resistance performance of the CRA longitudinally welded pipe.
Comparison in Cost：
The prior cost of oil and gas gathering & transportation pipeline using carbon steel with corrosion inhibitor is the lowest, but it will exceed the cost of bimetal composite pipe in 7 years; the bimetal composite pipe has higher prior cost than corrosion inhibitor, but has lower maintenance cost, which has obvious cost advantage than other corrosion prevention plans.
competitive advantages of bimetal composite pipes：
• Good Corrosion Resistance：
Compared with common steel pipe, bimetal composite pipe has better corrosion resistance
• High Strength：
Compared with corrosion-resistant alloy pipe, bimetal composite pipe has higher strength.
• Good Abrasion Resistance：
Compared with common steel pipe with internal anti-corrosion coating, bimetal composite pipe has better abrasion resistance.
• Good Heat Resistance：
Compared with FRP/GRP pipe, bimetal composite pipe has better heat resistance.
• Cost Effective ：
Low-cost base pipe, fewer CRA layer or lining pipe and optimal design of wall thickness make bimetal composite pipe cost effective.
• Safety & Reliability：
The patented technology, special equipment and manufacturing process are used to guarantee surface quality of bimetal composite pipe and corrosion resistance of welding seam, ensure safe and reliable operation.
• Lower Operating Costs：
Bimetal composite pipe can remarkably reduce maintenance and management expenses during the operation.
Persona a contactar : Xu Sum, 00862133780199
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de Bimetal composite pipes Buscar en la categoria : Materias primeras Buscar en la categoria : pipes, composite, bimetal |
330 InformáticaReportar abuso
Miércoles 21 octubre 2020
Shining Jins Enterprise Co., Ltd. specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan. Production capacity: T-Yoke/Pole Piece : Diameter of Piece : 28mm up to 250mm Diameter of Pole : 10mm up to 70mm Length of Pole ...
Shining Jins Enterprise Co., Ltd.
- jsicyoke
- 330 - Taoyuan City
- +88 6 33 61 06 38
330 Bienes de equipoReportar abuso
Miércoles 21 octubre 2020
Shining Jins Enterprise Co., Ltd.proporciona servicio de OEM y ODM para producir y mecanizar piezas metálicas / componentes de hardware, como piezas de automóvil, piezas de barcos, piezas de máquinas y componentes de herramientas, etc. Ubicación : No.107, Lane 530, Sec. 1, Guoji Road...
Shining Jins Enterprise Co., Ltd.
- jsicyoke
- 330 - Taoyuan City
- +88 6 33 61 06 38
63560 Mayoristas / proveedoresReportar abuso
Viernes 22 noviembre 2024
Precio : 6 500,00 €
Camion d'articles de solderie Origine des articles : - Marchandises provenant de déstockage - Articles destinés aux soldeurs Origine des articles : - Marchandises provenant de déstockage - Articles destinés aux soldeurs Description du camion : - Famille équipement de la cuisine ...
SARL Prospect Excel
- Mydestockage
- 63560 - Neuf Eglise
- 04 73 85 53 53
