Bio-Polishing Enzymes

Textile enzyme is a highly effective neutral cellulase preparation produced by the fermentation of trichoderma. Biopolishing enzymes textile industry is suitable for washing of towel fabric, can remove the surface hairiness, pellets, the treated towel fabric is softer, fluffy and drape well. This product has excellent anti-dyeing performance and no pollution to equipment, environment and fabric.

Product info

BioPolishing Enzymes Use Method

Temperature: 45-55 ℃, the best temperature 50 ℃;

PH: between 5.5 and 7.5, with an optimum PH of 6.5;

Washing time: 15-60 minutes, depending on the desired effect. The longer the time, the more significant the effect.

Dosage: 0.4-1% (o, w, f), the larger the dosage, the more significant the effect;

Bath ratio: 1: 8-1: 5;

Direct use without acid regulation;

Inactivate the enzyme: please immediately after washing to prevent excessive treatment of the fabric;

The enzyme can be killed in any of the following ways;

1. Heat up to more than 80 ℃, keep for 10 minutes;

2. Adjust pH value between 9 to 10, the temperature above 60 ℃, keep for 10 minutes;

3. Bleach.

Bio Polishing Enzyme Attributes

Appearance: light color solid powder;

PH: 5.5-7.5;

Smell: no special smell;

Stored in a cool and dry place, with less than 5% enzyme activity loss every 3 months;

Corrosion: this product has no corrosion on the equipment;

Injury: this product is not harmful to the skin. If it gets infected by accident, please rinse it with water immediately.

Packing: standard packing: 20Kg/drum.

This product is prepared by concentrated spray drying without compounding. Appearance of light color powder. Under the guidance of the company, customers can produce neutral powder enzyme powder of different grades and application effect with 4-50% blending amount in the following ways. The product can be used at room temperature (cold water environment) and medium temperature (40-55℃) to save intermediate costs and increase operating profits.

All the finished products include the following ingredients:

Neutral textile enzymes 4%, 8%, 10% or higher

Sodium dihydrogen phosphate 55%

Sodium hydrogen phosphate two 5%

Color killer 10-30%

Sodium sulfate 0-6%

In the combination, the user can choose the flower agent and refueling agent which have no harm to the enzyme activity to mix with the original enzyme. The paint remover requires a surfactant with a certain and washing capacity. In order to ensure the stability of product quality, it is suggested that users choose the special starting and refueling agent.

Storage of packaging

1. This product is light-colored powder preparation, stored in a cool and dry place.

2. When the temperature is 25 ℃, the loss of enzyme activity every three months less than 5%.

3. The neutral textile progenitor package is divided into 15Kg/barrel and 80Kg/barrel, the lighter dye package is 80Kg/barrel, and the flower lifter package is 25Kg/bag (woven bag).

This product is the concentrated fermentative liquid without compound, and its appearance is dark clear liquid. Under the guidance of the company, the customer can combine the acidic liquid enzyme preparation of different grades and use effects in the following ways with the proportion of 10% to 80%, so as to save intermediate cost and increase operating profit. The PH value of the mixture can be adjusted by glacial acetic acid, oxalic acid or dilute sulfuric acid and dilute hydrochloric acid.

Bio-Polishing Enzymes Ingredients

1. The product ingredients after compounding are:

Acid textile progenase: 10%, 20%, 30% to 80%

The mixed liquid 0-87%

The lighter color agent 3-20%

2. Composition of compound liquid formula in each group is as follows : (W/W%)

Table sugar 20 sodium benzoate 4 sodium benzoate 0.2 potassium sorbate 0.2

Sodium thiosulfate 0.15 water 75.45

Total 100

The above materials shall conform to the related standards of food additives.

Water is heated to 60 ℃ or so,

1. Add 20kg of sucrose and stir to dissolve

2. Add 4kg of sodium chloride and stir to dissolve

3. Add 0.2kg of sodium benzoate and stir to dissolve

4. Add 0.2kg of potassium sorbate and stir to dissolve

5. Add 0.15kg sodium thiosulfate and stir to dissolve

* Note the order of adding materials, adjust pH to 4.6~4.9 with acetic acid or citric acid. Storage of spare.

3. All finished enzyme water shall be provided with a certain amount of lighter color agent to improve the effect of hair removal and polishing.

Our special paint additive is a kind of surfactant mixed with different HLB values. Users can also choose other refueling agents that are not harmful to enzyme activity. The blending amount of refueling agent can be determined by the requirements of color removal and color retention.

A. Color preserving

The dosage is 3%-6%. General rules for the preparation of the product, the more the amount of the original enzyme, the more refueling agent required.

B. In the time of decoloring

The dosage is 10%-20%. The general rule is that the more the original enzyme is added, the more the refueling agent is required. Our special toner contains insoluble substance, please add when the mixture is high temperature.

4. Storage of packaging

1. This product is a dark clarified liquid preparation, soluble in water and stored in a cool and dry place.

2. When the temperature is 25 ℃, the loss of enzyme activity every three months less than 5%.

3. The packaging of acid textile progenase is 30Kg, 250Kg, 1200Kg, plastic barrel; The paint is packed in 80Kg drum, paper barrel.