FLOW - 5854 Anuncios

Miércoles 18 octubre 2017

A full lift safety valve is one in which the disc lifts sufficiently, so that the curtain area no longer influences the discharge area. The discharge area, and therefore the capacity of the valve are subsequently determined by the bore area. This occurs when the disc lifts a distance...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Advantages 1, To achieve greater CV value and wider adjustable ratio S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon...

Miércoles 18 octubre 2017

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

Introduction of low lift safety valve 1.In low lift safety valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower...

Miércoles 18 octubre 2017

DIN Standard Safety Valve Features: Safety valves were first used on steam boilers during the industrial revolution. Early boilers without them were prone to accidental Explosion. Safety valves also evolved to protect equipment such as pressure vessel (fired or not) and heat exchangers...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve for steam, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap...

Miércoles 18 octubre 2017

Low Temperature Pneumatic Globe Control Valve / With Extended Stem Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve Disc, the unbalanced force is small, the permission...

Miércoles 18 octubre 2017

HCB Cage Type Double Seat Pneumatic Pressure Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure...

Miércoles 18 octubre 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Miércoles 18 octubre 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

Electric Three Way(3-way) Diverting Control Valve (GZDLX) Characteristics: Electric Three Way Control Valve includes Electric Three Way Mixing Control Valve (GZDLQ) and Electric Three Way Diverting Control Valve (GZDLX). Mixing Control Valve is mainly used to mix the medium from...

Miércoles 18 octubre 2017

Brief Introduction ZDLM Electric Actuated Sleeve Type Pressure Balanced Control Valve adopt Pressure Balanced Sleeve-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value...

Miércoles 18 octubre 2017

Brief Introduction ZDLP Electric Actuated Single Seat Globe Control Valve adopt top-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value. The Dis-guiding area is big....

Miércoles 18 octubre 2017

Pneumatic Three Way(3-way) Diverting Control Valve (GAZDLQ) Characteristics: Regulating valve for regulating media flow, pressure and liquid level.According to the opening of regulatory signals, automatic control valves, so as to achieve medium flow, pressure and level of regulation...

Miércoles 18 octubre 2017

CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Miércoles 18 octubre 2017

Precio : Negotiable

C5235E Double-column Vertical Lathes 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Miércoles 18 octubre 2017

C5231E Double-column Vertical Lathes china 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Miércoles 18 octubre 2017

C5228E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Miércoles 18 octubre 2017

Cantidad : 9999999999

C5225E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Martes 17 octubre 2017

Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and...

Martes 17 octubre 2017

Fiber Impurity Analyzer / MK2 Fiber Impurity Analyzer is a special instrument for measuring the impurity content of fiber. It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, impurities and Dust content. Supply: Shanghai...

Martes 17 octubre 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Martes 17 octubre 2017

Sample Test Furnace by Fire Retardant Coating Standard: GB/T 12441-2005 Sample test furnace by fire retardant coating main purpose: Sample test furnace for Fire proof coating, or the fire retardant coating combustion test chamber, the chamber method consists of two main parts, the...

Martes 17 octubre 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...