HARDENER - 67 Anuncios

Martes 30 noviembre 2021

Inorganic zinc rich primer is -soluble inorganic zinc-rich paint. The paint consists of alkali metal silicate as component one, zinc dust and pigment as component two. The inorganic zinc paint has an excellent anti-corrosion effect, can withstand temperatures as high as 400°C, and...

Martes 30 noviembre 2021

Acrylic polysiloxane paint is a high-performance, two-component, high-solids hybrid topcoat. It complies with all current VOC regulations, and does not contain heavy metals such as lead and chromium, and does not contain isocyanates. It has excellent weather resistance, yellowing...

Sábado 25 septiembre 2021

Thick build epoxy zinc epoxy primer is an epoxy zinc-rich primer with thick coating properties. The thickness of 70μm～80μm can be reached by airless spraying at one time. The ordinary epoxy zinc-rich primer does not have the performance of the thick coating, and one spray is about 40μm...

Sábado 25 septiembre 2021

This product is a two-component epoxy anti-rust paint composed of epoxy resin, zinc phosphate and titanium dioxide or iron oxide red and other pollution-free anti-rust pigments and polyamide curing agents, mainly used as a primer for fireproof coatings and primer for steel surface...

Sábado 25 septiembre 2021

Modified epoxy non-ferrous metal primer is formulated with a surface-tolerant agent, which will react with the rust on the substrates and form a passive film that has excellent protection to the iron and steel surfaces, with excellent physical and mechanical performances. It is used...

Sábado 25 septiembre 2021

Fuxi® high-build epoxy drinking water tank anticorrosive paint is a two-component epoxy anticorrosive coating. The product meets the technical requirements of the FDA and meets the drinking water hygiene standards. Epoxy drinking water tank paint is non-toxic to human body and is...

Sábado 25 septiembre 2021

High Build Epoxy Paint is made of epoxy resin, pigments, fillers, additives, solvents and curing agents. Its one-time dry film can reach a thickness of 100 microns, which greatly reduces the construction process and construction time. Its paint film is firm, wear-resistant, has good...

Sábado 25 septiembre 2021

FUXI® high build aliphatic acrylic polyurethane paint is a two-component coating made of aliphatic polyurethane resin, pigments, solvents, additives and curing agents. It has good thick film properties, excellent weather resistance, good acid and alkali resistance. It has a strong...

Sábado 17 julio 2021

Under FUXI® brand, Jinhai Special Coatings,paints manufacturer, has developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, polyurethane, fluorocarbon, chlorinated rubber, ethylene and other coatings. We keep developing new solvent-free paints, water-based...

Jueves 27 agosto 2020

Cantidad : 1000PCS - Precio : 0.1- 6

Professional Automotive Injection Mold for Cartridge Fuses TolerancesPlates and Mold Base Components: ± 0.013 mm (± 0.0005 in)Cavity components: ± 0.005 mm (± 0.0002 in)CAD/CAM SoftwareAutoCAD 2007UG NX8.5 CADUG NX8.5 CAMPro-E Wildfire Version... More Vehicle Switch Mold Tooling...

Sábado 14 diciembre 2019

Plastic Auto Parts Sensor Mould HanKing Mould produce all different kind fuse and connector for international OEM company, we have a lot of experience to short the project development time. HanKing Mould serves for globally Automotive & Vehicle products customers, more than 10...

Miércoles 30 octubre 2019

HanKing Mould technology of shenzhen hanking for globally Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing Mould Enginering Ltd. to provide customers the fast development time and stable quality to ensure the new project running well...

Viernes 30 septiembre 2016

Cantidad : 1 - Precio : USD 1

What high strength bonding glue should we use for bonding conveyor belt ? Conveyor belt which transfer materials in industry and mining easily slip and is damaged ,such as be scratched by scraper or be injured by a crashing object, which will effect the normal work of the industrial...

Viernes 02 septiembre 2016

Cantidad : 1 - Precio : USD 1

What gule we should use when coat conveyor drum ? To do conveyor drum coating,we need two kinds materials , one is drum coating rubber sheet , the other is glue . Before coating, we must first know the surrounding environments, and then accord to the technique to choose the right...

Martes 30 agosto 2016

Precio : 10,00 €

Liquid Silicone Rubber for Screen Printing RH-G8Product Name: Liquid Silicone Rubber for Screen Printing RH-G8Basic Character: Appearance: TransparentViscosity(25℃,mPa.s): 450000–800000Operability time: 1 hour in common temperatureDensity(25℃): 0.9800-1.1000Hardening time: 20-50s/80℃Hardness...

Jueves 11 agosto 2016

Cantidad : 1 - Precio : USD 1

Which kind of bonding glue can be used for pulley lagging? This is decided by the operation method, there are three ways for pulley lagging, they are hot splic ing pulley lagging, cold splicing pulley lagging and tile shell type pulley lagging. We have compared all the three methods...

Viernes 05 agosto 2016

Cantidad : 1 - Precio : USD 1

What's the usage of repair strip purchased in power plants? As important transport system in power plant ,conveyor belt will affect the efficiency of the entire enterprise in case of halting. Repair strip can made conveyor belt back to work immediately after being repaired...

Sábado 30 julio 2016

Cantidad : 10 tons pe - Precio : 8.25 USD/kg

Date sheet of RTV2 Non-oily silicone rubber for candle molding of food grade RTV2 Non-oily silicone rubber for candle molding of food grade RTV2 mold liquid silicone for decorative candle mold is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ...

Jueves 28 julio 2016

Cantidad : 1 - Precio : USD 1

Belt cold splicing glue Before we choose glue, let us has a brief understanding on belt cold splicing joint. Belt cold splicing joint, which means we sealed the joint with cold splicing methods, however, this method is no need to heat with vulcanizer. After we brush the glue, we...

Sábado 23 julio 2016

Cantidad : 1 - Precio : USD 1

What materials and tools does it need to do conveyor belt daily repair? Before choosing mateirals and tools ,we need firstly decide which repair method we will use, cold vulcanizing or hot vulcanizing ? Comparing with hot vulcanizing, cold vulcanizing is one popular way in common use ...

Sábado 16 julio 2016

Cantidad : 20 tons - Precio : 4,50 €

Brief Introduction： β-HDAA is white powder. It is mainly used as a hardener (crosslink) in outdoor polyester powder coatings, not toxic and better than TGIC. Specification： Test Item Limit Melting Range 120-130℃ Hydroxyl Value (mg KOH/g) 640-740 Volatile Matters ≤2...

Sábado 16 julio 2016

Cantidad : 20 tons - Precio : 1,20 €

Matt Hardener ICASON68 Description Matt Hardener ICASON68 is a composed salt of cyclic-amidine and multi-acid. It utilizes the two different reaction rates of group in molecular structure, and during the curing process, it generates nonuniform shrinkage then forms the matt surface...

Viernes 15 julio 2016

Cantidad : 1 - Precio : USD1

The differences between cold splicing pulley lagging and hot splicing pulley lagging Before distinguishing two methods, we should have a understanding on them. Cold splicing pulley lagging, the roller doesn't have to be disassembled, we can brush glue on it af ter grinding the roller...

Sábado 02 julio 2016

Cantidad : 1 - Precio : USD 1

Can it reach high strength to make conveyor belt cold bonding joint? Tradditional conveyor belt joint use belt fastener ,due to unreasonable design of fastener structural itself, longitudinal scrape of belt is happened easily after jointing . Afterwards, there is a new way--hot vulcanizing ...

Martes 22 marzo 2016

Cas：330-54-1 Apperance: white crystalline solid Allias: Urea,N'-(3,4-dichlorophenyl)-N,N-dimethy l-;Herbatox;3-(3,4-dichlorophenyl)-1,1-d imethyl-urea;3-(3,4- Dichlorophenyl)-1,1-dimethylurea;Urea, 3- (3,4-dichlorophenyl)-1,1-dimethyl-;DP Hardener 95;HW 920;Karamex;Vonduron;1-(3,4...)

Jueves 17 diciembre 2015

Cantidad : 20MT - Precio : USD900/MT

MICVIN principal producto ESPECIFICACIONES Embalaje fuerte adecuado para el transporte de larga distancia al mar / aire y tierra adentro Excelente integridad hebra, de alta densidad aparente Capacidad de flujo de Superior en uso en seco y fácil control Dispersión uso húmeda...

Martes 07 abril 2015

Cantidad : 500kg

- Interior Matting Agent M-20 - 【Composition】The synthesis of acrylic resin and catalyst 【Typical properties】 Appearance: Ivory or pale yellow powder Bulk density: 450-550 g/l Non volatile: 99% 【Application】 1. M-20 is suitable for above 3%@60°gloss in polyester epoxy hybrid...

Martes 07 abril 2015

Cantidad : 500kg

- Interior Matting Agent M-21 - 【Composition】The synthesis of acrylic resin and catalyst 【Typical properties】 Appearance: Ivory or pale yellow powder Bulk density: 450-550 g/l Non volatile: 99% 【Application】 1. M-21 is suitable for above 3%@60°gloss in polyester epoxy hybrid...

Viernes 27 junio 2014

www.buysanitaryware.com Basic Info. Model NO.: JZ2008 Material: Solid Surface or Artificial Stone Style: Without Faucet Notch: Single Basin Type for Basin: Bowl Sinks Surface Treatment: Polished Installation Type: Above Counter Shape: Oval Number of Holes: One Sink Style: Single Bowl Color...

Martes 22 abril 2014

Cantidad : 200kgs - Precio : USD6.58

Silicone rubber for mold making Silicone rubber for mold making feature: Silicone rubber for mold making has very fine detail When colored, sprayed or painted it will appear to be real!This addtion cured silicone bears FDA certificate, All the Silicone Rubber Molds are app roved...