TEMPERATURE LIQUID SILICONE RUBBER FOR - 31825 Anuncios

Lunes 30 enero 2023

Cantidad : 1000Kgs - Precio : USD1~2000/Kg

SiSiB® PC4108H is a colorless clear liquid; it is used modern silicone-hydrogel contact lenses. Technical Data CAS No. 17096 07 0 EINECS No. 241-165-0 Formula C16H38O5Si4 Molecular Weight 422.81 Boiling Point 139°C [760mmHg] Flash Point 201°C Appearance Clear liquid...

Lunes 30 enero 2023

Cantidad : 1000Kgs - Precio : USD1~2000/Kg

SiSiB® PC4100H is a methacryloxypropyltrimethoxysilane; it is a clear, light and heat sensitive liquid with a faintly sweet odour. SiSiB® PC4100H acyl silane is used as adhesion promoter at organic/inorgainc interfaces, as surface modifier (e.g. imparting water repellency, organophilic...)

Lunes 30 enero 2023

Cantidad : 1000Kgs - Precio : USD1~2000/Kg

SiSiB® PC4100 is a methacryl-functional silane; it is a clear, light and heat sensitive liquid with a faintly sweet odour. It is equal to Momentive's A-174, Dow's Z-6030, Wacker's GF31, Evonik's Dynasylan MEMO, ShinEtsu's KBM-503. SiSiB® PC4100 acyl silane is used as adhesion promoter...

Domingo 29 enero 2023

Micro crystal wax is a refined synthetic wax with similar microcrystalline properties. As an experienced micro crystalline wax manufacturer, we provide micro crystal wax with the characteristics of good gloss, high melting point, and light color. The structure of micro crystal wax...

Domingo 29 enero 2023

The paraffin wax in china is fully refined wax, and the content of fused-ring aromatic hydrocarbons is low. The fully refined paraffin wax has good chemical stability, light stability and good thermal stability. The china fully refined paraffin wax has strong color, good plasticity...

Domingo 29 enero 2023

The Fischer Tropsch wax, also called FT wax, with a high melting point (generally higher than 85°) is mainly composed of linear, saturated high-carbon alkanes with a relative molecular mass of 500-1000, which gives this chemical a fine crystal structure, high melting point, and narrow...

Domingo 29 enero 2023

Crude scale wax refers to the paraffin wax that has undergone perspiration or solvent deoiling but has not undergone the final refining process. This slack wax still has a low melting point paraffin wax. In order to obtain a high melt paraffin wax, the crude scale wax needs to be refined again...

Domingo 29 enero 2023

Myerswax carries a lot of raw types of candle wick and pre-waxed good candle wicks components! As a professional candle wick manufacturers in China, we offer candle wick bulk in small or large rolls and pre-waxed wicks wholesale components. Types Of Candle Wicks Wholesale As a professional...

Domingo 29 enero 2023

8021 aluminum foil is a hot-selling aluminum foil product of Lichen Aluminum. The 8021 aluminum foil has great physical advantages. Add other trace elements, and avoid the shortcomings of pure aluminum foil. It will form a layer of aluminum oxide film on the surface, which has a good...

Domingo 29 enero 2023

The 5754 aluminum sheet is a non-heat-treated Al-Mg alloy and is also an antirust aluminum sheet. 5754 aluminum properties show excellent corrosion resistance, good welding, and good machining formability. Most notably, anodizing and other surface treatments of 5754 aluminum alloy...

Domingo 29 enero 2023

5754 aluminum coil is a typical 5 series Al-Mg anti-rust alloy. Because it contains the main alloy component Mg, it has excellent corrosion resistance, rust resistance, high fatigue strength, good weldability, and workability. In practical applications, 5754 aluminum alloys with different...

Domingo 29 enero 2023

3005 aluminum sheet belongs to 3 series Al-Mn alloy with Mn content between 1.0-1.5, and 3003, 3004 aluminum sheet belongs to rust-proof alloy with strong corrosion resistance. Similarly,3005 aluminum sheet is also a non-heat-treated alloy, which is cold-processed to improve its...

Domingo 29 enero 2023

Cut to Length Machine Videos BOYA metal cut to length line is often used in steel rolling production line. In the continuous rolling billet workshop or small section workshop, it is placed at the end of the rolling line to cut the rolled pieces into fixed length or only the head or...

Domingo 29 enero 2023

Galvanizer machine is an integrated product of mechanical and electrical control. According to the process requirements, two main bodies and three stations combined roll coater machine can be configured to achieve rapid non-stop switching of continuous units, so as to meet the needs...

Domingo 29 enero 2023

Cap aerosol is a plastic lid that fits over the aerosol can. Generally speaking, aerosol cans are made of aluminum or iron materials. After filled with gas/liquid, a certain pressure will be generated inside the aerosol can, normally there is an aerosol valve locked in the neck of...

Domingo 29 enero 2023

Specification of LFF output flange gearbox Rated POarameter Table of LFF Series Planetary Reducer Gearbox Nominal output torque(Nm) 14-3150 Reduction ratio 4-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 58-79 Output flange and tapered roller bearings...

Domingo 29 enero 2023

Specification of LFER right angle planetary gearbox Rated Parameter Table of LFER Series Planetary Reducer Gearbox Nominal output torque(Nm) 14-600 Reduction ratio 3-100 Backlash(arcmin) ≤8 Max.working temperature(℃) 90 Noise(dB) 63-74 A high-performance right-angle solution...

Domingo 29 enero 2023

LFD Planetary Reduction Drive Specification of LFD Planetary Reduction Drive Rated Parameter Table of LFD Planetary Reducer Gearbox series Nominal output torque(Nm) 25-2550 Reduction ratio 3-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 60-77 LFD Tapered...

Domingo 29 enero 2023

Specification of LFB Concentric Shaft Planetary Gearbox Reducer Rated parametertable of LFB series Concentric Shaft Industrial Planetary Gearbox Nominal output torque(Nm) 14-1900 Reduction ratio 3-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 63-77 ...

Domingo 29 enero 2023

Laifual Harmonic drive (strain wave gear, harmonic gearbox, harmonic gear drive reducer) mainly consists of three parts. Which are wave generator, flex spline, cicular spline. Our harmonic drive has the characteristics of zero-backlash, low-temperature rise, low starting torque, high reliability...

Domingo 29 enero 2023

This plastic profile extrusion line consists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing line features of good plasticization, high output capacity, low power consumption, and etc. The main plastic profile extruder speed controlled...

Domingo 29 enero 2023

The twin-screw extruder is composed of a transmission device, a feeding device, a barrel, and a screw, and the functions of each component are similar to single-screw extruder. The difference from the single-screw extruder is that there are two parallel screws in the twin-screw extruder...

Domingo 29 enero 2023

JWELL Machinery is designed and developed in a new idea, pipe and profile extrusion line produces PP pipe series, PVC pipeline series, ABS pipeline series, composite pipe series, etc., plastic pipe extrusion machine is high-yield, low energy consumption, good melt homogeneity, and...

Domingo 29 enero 2023

Due to the increasingly stringent requirements of the market for products, Jwell has developed advanced five-layer symmetric and seven-layer asymmetric distribution technology, which makes the products produced by the equipment obtain better barrier performance. In addition, the multi-machine...

Domingo 29 enero 2023

Precio : 1-10usd

Wholesale Beach Items As the temperature rises and people want to escape the heat, the beach has become the most popular place to play. Generally speaking, you need to prepare beach day items like swimsuits, sun hats, sunglasses, towels, beach shoes, and swimming rings when going to the beach...

Domingo 29 enero 2023

The coating of color-painted aluminum coil is divided into a polyester-coated aluminum coil (PE) and fluorocarbon coated aluminum coil (PVDF). The polyester coating formed by repeatedly baking and coating on the surface of the aluminum plate can form a continuous solid film firmly attached...

Domingo 29 enero 2023

The coating of galvalume steel is composed of 55% aluminium, 43.4% zinc and 1.6% trace elements. PPGL is a product made of painted galvalume steel coil. After surface pre-treatment like chemical degreasing and conversion treatment of galvalume metal, one or several layers of organic...

Domingo 29 enero 2023

Methyltriacetoxysilane Chemical Name Methyltriacetoxysilane Cas No 4253-34-3 Formula C7H12O6Si Color Colorless or light yellow Appearance Clear liquid or White crystal powder Purity min 95% Methyltriacetoxysilane Description CFS-343, Methyltriacetoxysilane is a silane...

Domingo 29 enero 2023

Methyldimethoxysilane Chemical Name Methyldimethoxysilane Cas No 16881-77-9 Formula C3H10O2Si Color Colorless Appearance Clear liquid Purity min 98% Methyldimethoxysilane Description CFS-779 Methyldimethoxysilane or Dimethoxymethylsilane is an alkyl & alkoxy silane...

Domingo 29 enero 2023

Methacryloxy silanes are organic compounds containing methacryloxy functional groups. Most of these silane coupling agents are colorless and clear liquid with a faintly sweet odor. Methacryloxy silanes are organic compounds containing methacryloxy functional groups. Most of these...