EPDM - 318 Anuncios

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of resilient seal gate valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively prevent the water hammer phenomenon. Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value. Festures of cold water...

Viernes 28 octubre 2022

With mechanical seal factory, Sealcon is able to design and manufacture a wide range of OEM mechanical seals. Our aim is to improve product quality and offer customized solutions to clients' needs, always seeking the best cost performance, with good reliability and high resistance...

Martes 11 octubre 2022

Barrel bungs plastic bung is G2 and G3/4'' plug type with ISO-228 thread, can well suit into drum flange on 55 gallon steel drums. It is a substitute for zinc plated drum plug in some cases. Whatever the material is, the bungs are aiming at reducing the risk of spillage and keeping...

Martes 11 octubre 2022

These steel drum flange and plug come available in zinc plated and phenolic lacquered styles, preventing from various corrosive contents. Closure is equipped with well-formulated EPDM, NBR or PE gasket, the different materials make it perform well under different filling conditions...

Jueves 08 septiembre 2022

Brass compression fittings for copper pipe can be used in PEX-AI-PEX tubing as well. The brass compression fitting is used in many projects and applications such as for gas, chemical, and oil. They are used mainly for their ability to create a tight leak-proof seal. They are also...

Sábado 27 agosto 2022

Features of Metal Seated Gate Valve The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland bolts only need to be tightened; Stem spherical stop-thrust, low friction resistance, so that the valve is light to open and close, low...

Sábado 27 agosto 2022

Festures of manual central heating balancing valve Straight flow structure, low fluid resistance; Handwheel display the number of opening cycles for easy debugging; Valve inlet and outlet have self - sealing test port; Valve disc self-balancing design, open and close is not affected...

Sábado 27 agosto 2022

Features of sewer knife gate valve Full bore design for high media throughput capacity; U-shaped gasket with good sealing effect; Gate plate with gate function, good shut-off effect, can effectively shut off all kinds of debris in the media, to solve the leakage phenomenon after shut-off...

Jueves 25 agosto 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possible back flow within plumbing systems. Wafer check valves are also known as clack valves, reflux valves, non return valves and one way valves...

Jueves 25 agosto 2022

Quick evacuation in a low vacuum level range, reduce cost and shorten the working cycle It can produce large vacuum flow, and handle all porous workpieces fast and safely Easy installation and easy operation Reduce product noise greatly FEATURES COMBINED TYPE MULTISTAGE VACUUM GENERATOR...

Jueves 30 junio 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO is a professional rubber lined butterfly valve manufacturers in China and butterfly valve is main products series of ZECO valve. The rubber lined concentric butterfly valve is widely used in various kinds of operating conditions because compare to other valves it cost lower and...

Jueves 30 junio 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Festures of Bronze Balancing Valve Good sealing, no , easy to adjust the rotation; Small mounting space, accurate and clear opening indication; The use of inclined valve core and stem is more fluid flow in the valve The surface is smooth and clean, and the appearance is delicate and beautiful...

Jueves 30 junio 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Festures of Backflow Preventers The double check valve is designed as a whole, with small structure； Body is streamlined with little resistance loss； Combination of a double check valve and safety drain valve can completely prevent backflow pollution under any working condition； All...

Jueves 30 junio 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of Altitude Control Valve Automatic tank fill and shut-off without the use of floats or sensors; Accurate shut-off to within inches of set point; High level point adjustable with single screw; Exhaust-to-atmosphere operation allows minimum pressure loss. Altitude Control...

Miércoles 29 junio 2022

Precio : 1-10usd

O-rings are one of the most frequently used products in sealing applications, relatively inexpensive and reliable. O-rings come in many styles and shapes. The material required depends on temperature, pressure, chemical, and other environmental factors. Materials such as EPDM, Nitrile...

Miércoles 29 junio 2022

Precio : 1-10usd

With mechanical seal factory, Sealcon is able to design and manufacture a wide range of OEM mechanical seals. Our aim is to improve product quality and offer customized solutions to clients' needs, always seeking the best cost performance, with good reliability and high resistance...

Miércoles 29 junio 2022

Precio : 1-10usd

Metal Bellow seals are ideal for high temperature applications and harsh chemical services where elastomers cannot be used effectively. This seal type incorporates metal bellows as a spring-loading mechanism to maintain face contact when the seal is not pressurized and eliminates...

Jueves 23 junio 2022

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

Double sphere rubber expansion joint generally refers to double bellow rubber joint, double sphere rubber joint is composed of internal rubber layer, reinforced layer with multi-layer scraping rubber nylon curtain cloth, external rubber layer composite rubber pipe joint. When a...

Jueves 23 junio 2022

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

Single sphere rubber expansion joint( single sphere rubber joint) generally refers to a rubber joint with a single rubber sphere structure. It's mainly used in pipelines in order to reduce vibration, decrease noise. It has good flexibility and is easy to use. Expansion Joint, Single...

Martes 21 junio 2022

Cantidad : 200Ton/mon - Precio : usd 0-10

Specification of WNKYET Equal Tee Multilayer Fittings CODE SIZE WNKYET16 16 WNKYET20 20 WNKYET25 25 WNKYET26 26 WNKYET32 32 Features of WNKYET Equal Tee Multilayer Fittings Material of WNKYET Equal Tee Multilayer Fittings Body material: CW602N/CW617N/Hpb58-3; Sleeve: AISI 304...

Jueves 16 junio 2022

Cantidad : 400 sets/y - Precio : $30000~300000/set

Mixing Modification of Elastomer——Blending Modification of SBS/SEBS Applications of Thermoplastic Elastomer: The English acronym of thermoset extrusion is TPE. In the Chinese market, TPE refers to SBS/SEBS blending modification materials. Because SBS/SEBS elastomer usually has a high...

Miércoles 15 junio 2022

Ceramic Membrane Products A ceramic membrane module is a complete unit composed of the ceramic membranes, housing, feed inlet, concentrate outlet, and permeate outlet. The ceramic membranes are arranged in parallel and vessel with housings. Housing is designed with standard connectors (flange...)

Sábado 30 abril 2022

In contrast with the concentric butterfly valve, a single offset butterfly valve whose stem axis deviates from the center of the disc and the center of the body at the same time, and the sealing pair is an oblique vertebra, is called an eccentric butterfly valve. As one of the professional...

Miércoles 27 abril 2022

Precio : 10-30USD

Injection Molding | Compression Molding Cost-effective and high quality rubber moulding parts Size from small to large, structure from simple to complex Inquiry Custom Mold Rubber Parts Quotes With yeas of experience in manufacturing industrial molded rubber products, Zhongde has...

Jueves 21 abril 2022

Cantidad : 1000 sets - Precio : USD 1-1000

Sealcon supplies a series of pump mechanical seal parts, which are developed and manufactured by using the latest technology. All the mechanical seal parts have a smooth flawless performance and have a long service life. We supply standard pump seal parts as well as customized products...

Miércoles 20 abril 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of resilient seated valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber covered gate...

Sábado 25 diciembre 2021

ZECO Valve Group is a humble and united team, to be more dilligent and progessive to show the itegrity to our clients, ZECO gate valve is designed with built-in safety reliability in every detail. WRAS approved rubber and epoxy powder make the valve suitable for drinking water. ZECO...

Sábado 25 diciembre 2021

ZECO Valve Group is a humble and united team, to be more dilligent and progessive to show the itegrity to our clients, ZECO gate valve is designed with built-in safety reliability in every detail. WRAS approved rubber and epoxy powder make the valve suitable for drinking water. Festures...