SUPPORTED - 1442 Anuncios

Viernes 14 agosto 2015

Safety Instructions 1. Read these safety instructions carefully. 2. Disconnect this equipment from any AC outlet before cleaning. Use a damp clot h. Do not use liquid or spray detergents for cleaning. 3. For plug-in equipment, the power outlet socket must be located near the equip...

Martes 04 agosto 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Martes 04 agosto 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Martes 04 agosto 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Sábado 01 agosto 2015

- Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62... Ball bearings. A typical arrangement is...

Sábado 01 agosto 2015

- Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62... Ball bearings. A typical arrangement is...

Sábado 01 agosto 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Sábado 01 agosto 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Sábado 01 agosto 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Viernes 31 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Viernes 31 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jueves 30 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jueves 30 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jueves 30 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Jueves 30 julio 2015

Product Description The Portable Device Drop Testing simulate the drop consequence,avoid turning specimen around to reach the requirement of high standard testing. Product Feature * Model: KD-208 * Testing height Simple-drop type: 700 ~ 2000mm; guided-drop type: 350 ~ 2000mm...

Miércoles 22 julio 2015

Specifications of X(S)M-50X40 ~ X(S)M-160X40 Rubber (Plastic) Internal Mixer (Intensive Mixer) Model Item X(S)M-50×40 X(S)M-80×40 X(S)M-120×40 X(S)M-160×40 Total Volume of Mixing Chamber L 50 80 120 160 Working Volume of Mixng Chamber L 30 60 90 120...

Sábado 11 julio 2015

Cantidad : 1 - Precio : $3,429.00

Truly affordable. Remarkably versatile. With the VersaStudio, we've taken everything that makes a Roland printer great and packed it into one powerful, profit-producing package. Award-winning mild solvent inks. Your choice of media. One device that can print and cut an incredible...

Sábado 11 julio 2015

Precio : $65/pcs

- Features: - Fully compliant to XFP MSA Rev.4.5 - Supports of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps - Optic transceiver compliant to fiber channel 1200-M5-SN-l,1200-M5E-SN-l, 1200-M6-SN-l at 10.51875Gbps - Transmission distance up to 82m (50¼m MMF) or 300m(high-bandwidth MMF...)

Viernes 03 julio 2015

CMA1810-FET-C Automatic feeding double bald laser cutting machine Development objectives CM series laser equipment is fully motion control performance and enhance the effect of laser processing, whether from software design, mechanical construction, electrical performance and accessory...

Jueves 02 julio 2015

CMA1390C new high-speed laser cutting machine CMA1390C laser cutting machine is our common models based on an upgraded model, the use of modular design, steel structure, the machine run more smoothly; ergonomic design with Han's Yueming independently developed completely offline EM control ...

Jueves 02 julio 2015

CMA-1325 Large Plate Laser Cutting Machine To achieve wide-format cutting and splitting, CMB-1325 large platelaser cutter was successfully designed and manufactured by incorporating the design elements and structural concepts of large and medium-sized machine tools. It adopts strong...

Miércoles 01 julio 2015

CMA1530C-G-A Fiber Laser Cutting Machine CMA1530C-G-A Fiber Laser Cutting Machine is made of reinforced welding lathe bed, after tempering treatment and vibration aging to eliminate stress and then under finish milling by large planomiller, to ensure the long-term stability of the...

Sábado 20 junio 2015

Cantidad : 1 set - Precio : FOB Qingdao 2870$

good price co2 laser cutting machine Parameters of good price laser cutting machine : Model AKJ6090 Working area 600*900mm Laser power 60W Laser type CO2 laser tube,water-cooling Engraving speed 0-40000mm/min Cutting speed 0-20000mm/min Power supply 220V/50HZ ...

Sábado 20 junio 2015

Cantidad : 1 set - Precio : 5400US$

Acctek cnc wood carving machine What is it main features ? 1.Adopt imported linear square orbit. 2.Constant torque spinde with imported bearings. 3.It is specially used for acrylic, light wood etc. 4.DSP operation system which can allow machine work without connecting computer 5...

Martes 09 junio 2015

Related link: http://astouchlcd.com/index.php?_m=mod_product&_a=prdlist&cap_id=145 15'' POS Touch screen Monitor Specification Model A15-IPC03 Screen Size 15" Active Display Area (mm) 304.128mm(W)×228.096mm(H) Display Mode 4: 3 LCD Type TFT-LCD Resolution 1024×768...

Martes 09 junio 2015

Related link: http://astouchlcd.com/index.php?_m=mod_product&_a=prdlist&cap_id=145 15'' POS Touch screen Monitor Specification Model A15-IPC03 Screen Size 15" Active Display Area (mm) 304.128mm(W)×228.096mm(H) Display Mode 4: 3 LCD Type TFT-LCD Resolution...

Sábado 30 mayo 2015

used jaw crusher portable high quality used jaw crusher for sale manufacturer grateful Alunite jaw stone crusher in Azerbaijan Recently, Shanghai Tigers Mining Machinery Company has produced a new generation of cone crusher. In this article, the experts of Shanghai Tigers Mining...

Sábado 30 mayo 2015

used jaw stone crusher for sale sand and gravel jaw crushers in azerbaijan grateful Alunite jaw stone crusher in Azerbaijan Recently, Shanghai Tigers Mining Machinery Company has produced a new generation of cone crusher. In this article, the experts of Shanghai Tigers Mining Machinery...

Lunes 25 mayo 2015

- Product Description - Product Description： The HOG feature generator is a high-performance IP core for pedestrian detection applications. It is capable of processing SVGA@44fps video stream when implemented on Spartan-6. Key Features & Benefits ： • HOG-based with 15-way SVM...

Lunes 25 mayo 2015

- Product Description - Camera Module is a digital high-difinition camera module with 1920*1080 resolution. The device adopt independently developed technology. Implement the 3A algorithm(Auto white balance, auto focusing and auto exposure). Equipped with 18x optical zoom, it has quick...