SOLVENTS - 1795 Anuncios

Lunes 01 julio 2019

After selecting the type of SPE cartridges, we have to determine the specifications of the SPE cartridge. The principle of selecting the SPE cartridge specification is to first ensure that the SPE cartridge packing has sufficient capacity to retain the target compound 100% on the column...

Sábado 29 junio 2019

Cantidad : 1 - Precio : US $7.00 - 8.00/ Pie

Application: HD PE is used where sliding abrasion occurs or where metal parts meet, causing friction or abrasion wear. It is good for chute and hopper liners, convey or components, wear pads, machine guides, impact surface and guide rails. Performance: Polyethylene board odorless...

Viernes 21 junio 2019

1. Capacity setting For the adjustable pipette, it is usually operated in the range of 10% to 100%. The optimal pipetting capacity is in the range of 35% to 100%. At this time, it is less affected by the operation technique and can better protect the pipetting. Accuracy and precision...

Viernes 21 junio 2019

We can always hear such a conversation between those researchers. “Hey, buddy, what is your purity degree of the end products today?” “Damn it. Such a low degree that I cannot even use for the next step. Any better methods for clarifying raw materials?” Then there comes Hawach syringe filter...

Viernes 21 junio 2019

The material of the nylon membrane filter is aliphatic nylon. It has good hydrophilicity, the appropriate concentration of acid and alkali resistant, and applies not only acid and alkaline aqueous solution, but also suitable for organic solvent, such as s, hydrocarbon, ethers, esters...

Viernes 21 junio 2019

Normally SPE cartridge has two basic adsorption modes: target compound adsorption mode, impurity adsorption mode; 5 operation modes: gravity operation, manual positive pressure, centrifuge, negative pressure and positive pressure mode. Now let's review the whole process step by step...

Jueves 20 junio 2019

Basic Knowledge of Vacuum Filtration Based on the principle that under the same pressure (vacuum degree), the vaporization temperature of the water is lower than that of oil, scientists make practical equipment which is called vacuum filter. In fact, vacuum filtration is the most...

Jueves 20 junio 2019

Suitable for Soxhlet-type and other similar devices, the extraction thimbles are used to adapt a sample of solid material to extract certain components out, with the addition of sufficient and appropriate solvent. Cellulose extraction thimbles which are made of high-quality alpha...

Jueves 20 junio 2019

Firstly, let's divide those bottle-top dispensers into 3 groups according to their materials A. Highly corrosion resistant materials such as PTFE, PFA, boron silicate, platinum, etc. Application: Resistant to high-temperature sterilization (121℃), withstand most of the acid, alkali...

Jueves 20 junio 2019

PTFE stands for Poly Tetra Fluoroethylene. People generally call it non-sticking lining or easy-cleaning material. The material of PTFE has the characteristics of antiacid and antisolvent, which means it is hardly insoluble in all solvents. And PTFE is heat-resistant and with low...

Miércoles 19 junio 2019

Hawach Scientific Co., Ltd is main laboratory supplies and industrial filter manufacturing enterprises, from raw materials and production process to ensure the maximum quality monitoring, each batch of a strict quality testing and product warranty. At present, users are distributed...

Miércoles 19 junio 2019

Hawach scientific takes filtration technology as its core and manufactures high-quality filtration products. Our products after years of research and development, the use of advanced technology and first-class production equipment, to provide customers with all kinds of high-quality...

Miércoles 19 junio 2019

SPE cartridges, with a full name of Solid Phase extraction cartridges, is also called the SPE column( solid phase extraction column). The solid phase extraction column/cartridges is a pretreatment device for the sample being analyzed, which developed from the chromatographic column...

Martes 18 junio 2019

Hawach glass solvent filters is an important part of laboratory filtration, and many customers often encounter cleaning problems when using glass solvent filters. The conventional cleaning methods mainly include the following: 1. Soaking with an acidic solvent: The advantage of this...

Martes 18 junio 2019

A more efficient way to extract compounds from solid materials—Soxhlet extraction (also known as sand extraction). In the laboratory, Soxhlet extractor uses solvent reflux and siphon principle, so that the solid substance is continuously extracted by pure solvent, which saves solvent...

Domingo 16 junio 2019

Ceramic Nanofiltration membrane is relatively recent membrane filtration system, with the purpose of softening and removal of disinfection by-product precursors such as natural organic matter and synthetic organic matter. More ultrafiltration membrane system details here! CHARACTERISTICS...

Sábado 15 junio 2019

What is SPE Cartridge? The term SPE cartridges is short for Solid Phase Extraction cartridge. It is a kind of sample preprocessing equipment (extract, separate and concentrate) which is developed from the chromatographic column. SPE cartridge is mainly used for preprocessing of the...

Viernes 14 junio 2019

As a simple and fast absorption chromatography technique for the routine purification of organic compounds, flash chromatography is developed for the daily purification of reaction products in the lab, which is low costs and achieves separations of samples (0.01-10.0 g weight) in short time...

Viernes 14 junio 2019

Capsule filter, which is also called disposable filter, is composed of the outer shell and the filter. The outer shell is usually made of high temperature polypropylene material. This kind of polypropylene material on the surface of the capsule filter does not contain adhesives and...

Jueves 13 junio 2019

NH2 HPLC columns can be used in the positive phase or in the negative phase, but it should be noted that the positive phase solvent and the negative phase solvent are usually not mutually soluble. New NH2 HPLC columns are preserved in the positive phase environment under normal circumstances...

Jueves 13 junio 2019

Introduction of Hawach scientific filtration manifold Multifilter is designed and manufactured for the simultaneous filtration of multiple samples. At present, when the laboratory carries on the filtration to the solution, generally USES the glass material sand core filtration device...

Jueves 13 junio 2019

It's important to know the way to choose the right syringe filter for filtration. And the membrane materials used for manufacturing syringe filters often determine your choices. Let's learn the different types of membrane materials for filtering in the lab. As the most popular membrane...

Miércoles 12 junio 2019

A few days ago, I wrote a summary of the filter membrane. Many customers said that no product had no truth. So what I wrote today is a product that needs to be used in combination with microporous filter membrane – the solvent filter device. Technical parameters The solvent filter...

Martes 11 junio 2019

Developed in the 1970s, flash column chromatography is the method of isolating and purifying a component from a mixture by passing the sample through the flash column filled with a gel. The inventors of flash column chromatography were using medium pressure chromatography and short...

Martes 11 junio 2019

Hawach Scientific Nylon membrane has natural hydrophilic, wide chemical compatibility, without surfactant. Nylon folding filter elements in the production process strictly control the production environment to ensure the quality and cleaning of the filter elements. The overall sealing...

Martes 11 junio 2019

The installation of the HPLC column should be carried out in the following three steps: a. Unpack the HPLC column and confirm the type, size, date of manufacture, and solvent stored in the column. b. Unscrew the sealing plug from the joints at both ends of the column and put it back...

Martes 11 junio 2019

Solid phase extraction (SPE) is a separation process by which compound that is dissolved or suspended in a liquid mixture, thereby being separated from other compounds in the mixture according to their physical and chemical properties. There are 4 general functions as below: 1.Matrix...

Domingo 09 junio 2019

Praharit Pigment is the leading manufacturers of Phthalocyanine Pigments & worldwide provider of high quality custom manufacturing services to the quality pigments for many industries. From process development to commercial manufacturing, we focus the right resources to provide...

Viernes 07 junio 2019

Pipettes are common and necessary laboratory equipment in the laboratory, and the experimenter must be very cautious about their daily use. However, many people will ignore the related maintenance and maintenance of the pipette after use. Precautions for maintenance: 1. Regularly...

Viernes 07 junio 2019

If you want to dispense an aliquot of liquid from bottles, the bottle-top dispensers always provide the best results for your lab in the way of productively dispensing and no reagent wasting. Depending on what you need, the important factors of choosing the bottle-top dispenser include...