CASTING|LOW - 24675 Anuncios

Friday 21 August 2020

Cantidad : 1,000 unit - Precio : US$5 ~ US$400

※ Several paging modes (all zones, group zones,or individual zone). ※ Working with 16 zone paging selector or 16 zone audio matrix for paging function. ※ Signals using real-time transmission technology. ※ External 24V DC input connector. ※ Built-in chime,with mute function. ※ With volume control...

Friday 21 August 2020

Cantidad : 1,000 unit - Precio : US$5 ~ US$400

※ 16-zone paging selection. ※ 16-zone alarm function. ※ Volume control. ※ Built-in chime,with mute function. ※ Each paging zone has LED status indicator. ※ One MIC input 6.5mm jack,four remote MIC inputs, one line input, and one EMC input. ※ 25-pin activation bus, and low level alarm activation...

Thursday 20 August 2020

Precio : 1 000,00 €

As a good reputation manufacturer in China, we here share the basic injection mold making process in our company: - Products design department provides product information to injection mold design department, injection mold designers complete cost analysis in two working days, and...

Thursday 20 August 2020

Precio : 1 000,00 €

Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as , medical devices, wire and cable insulation... the list is endless. It is the world's third-most widely produced synthetic plastic polymer. Polyvinyl Chloride can be injection...

Thursday 20 August 2020

POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplastic containing the functional group of a carbon bonded to two -OR groups. Other names of POM are Polyformaldehyde, Polymethylene glycol...

Thursday 20 August 2020

Precio : 1 000,00 €

Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most common variant for engineering applications is Nylon 6/6. Nylon 6/6 can be extruded...

Thursday 20 August 2020

Cantidad : 100-100000

Product characteristics 1. LED colors: Red, Green, Yellow, White, Blue, Orange, Duo-colors LEDs 2. LED size：0603，0805，1206，020 3. LED brand： Kingbright, Every light 4. Little heat, low-cost, used for the outdoor environment Can be bonded into Polyester or FPC Our company provide custom...

Thursday 20 August 2020

Cantidad : 100-100000

Product characteristics LGF is a thinner construction, without limited to devices thickness. LGF has a limited impact on the tactile feel of buttons. LGF can provide even backlight across larger and small areas. Reliability and long lifetime, Low-Cost Efficient power consumption and...

Thursday 20 August 2020

Polypropylene carpet is a synthetic fiber carpet made from petroleum refined propylene. Polypropylene carpet belongs to chemical fibers. Polypropylene carpet has the advantages of light texture, low price, friction resistance and good care. Especially, the technological progress in...

Thursday 20 August 2020

Function of 3D PE Brick Wallpaper 1. 3D soft foam decoration, which can prevent children from injuries and bring safety to family. 2. Materials are environmentally friendly, non-toxic, and odorless, which bring the safety and comfortable atmosphere to your home. 3. Realistic appearance...

Thursday 20 August 2020

Bathroom Anti-slip mat has a good anti-slip effect. It is mainly used in bathroom, bathtub, toilet and other places to prevent people from falling in a slippery environment. Classification Of Bathroom Anti-Slip Mats Nylon bathroom anti-slip mat: good wear resistance, easy to clean...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

Sintered Neodymium Magnets Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product...

Thursday 20 August 2020

Precio : 0.01-100 USD/PCS

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Thursday 20 August 2020

Precio : 1000-2500

AFEN make up vending machine, an upgraded new retailer for cosmetics. We can shopping for cosmetics without the restriction of time and place,like just get off the plane at airport, or waiting for your train at railway station. According to the package of the products,300-800 items...

Thursday 20 August 2020

Precio : 1000-2500USD

AFEN coffee vending machine, a smart coffee and snacks convenience store with 24 hours service. With the refrigeration left cabinet for sell drinks and snacks, and the right cabinet for sell the instant coffee. Different taste and 4 hot 4 cold instant drinks with various payment method...

Thursday 20 August 2020

Precio : 1000-2500USD

AFEN adult vending machine, the intelligent unattended retailer for all the adult products. It's suitable for sell , toy, doll and any other adult products.It provide vending machine s,too. Each slot will be designed to suitable for put the products. And it can by used for sell sanitary...

Wednesday 19 August 2020

Flexible PCB is generally made of a flexible insulating substrate and is a flexible material that can be bent and flexed arbitrarily. FPC is favored for its lightweight, thin thickness, and free bending and folding. FPC is generally used in boards that need to be repeatedly flexed...

Wednesday 19 August 2020

High-frequency PCB is advancing to the trend of high speed, low consumption, small volume, and high anti-interference ability, which demands many new requirements of the design of PCB. The design of high-frequency PCB is an important stage of the electrical production design. After...

Wednesday 19 August 2020

Advantages of high-speed PCB: Multilayer PCB is generally used in high-speed PCB design. Multilayer circuit boards are actually formed by laminating and bonding several etched single or double-sided boards. Compared with single-layer and double-layer circuit boards, multilayer circuit...

Saturday 15 August 2020

Cantidad : 200 units/ - Precio : 7200-28800 USD

The Barrel Blast Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. The Barrel Blast Machine or drum type shot blasting machine is the ideal solution to clean small to medium size parts that would normally become...

Saturday 15 August 2020

Cantidad : 200 units/ - Precio : 7200-28800 USD

The driving system of the Y30 series cnc hydraulic punching machine, with low noise, high speed, and high efficiency, and the thickness of the punching plate is 6mm. The design of high precision and high repetitive positioning accuracy enables the machine to produce more high-precision...

Saturday 15 August 2020

Cantidad : 200 units/ - Precio : 7200-28800 USD

H beams shot blasting machine is the most efficient and the most effective process to remove all forms of rust and corrosion materials from h beams prior to painting or coating. It is more efficient than steel beam shot blasting machine, steel bar shot blasting machine and scaffolding...

Saturday 15 August 2020

Cantidad : 200 units/ - Precio : 7200-28800 USD

Gas cylinder shot blasting machine is used to automatically clean the surface of the cylinders by blasting of the abrasive coming from the blast turbines of the machine in a confined chamber. The cylinders get shot blasted as they pass through the blasting chamber on the base of the machine...

Saturday 15 August 2020

Cantidad : MOQ: 1 pc - Precio : USD 4.2 /pc to USD 1

CRYSCORE supplies sapphire wafers with the high-quality surfaces in all orientations (C-plane sapphire, A plane sapphire, R-plane sapphire, M plane sapphire, N-plane sapphire, V-plane sapphire, 10-14, etc.) and, with a miscut if desired. In addition to standard dimensions and orientations...

Friday 14 August 2020

Quick Details CAS No.: 65997-18-4 Other Names: enamel glaze Place of Origin: China, CN;HEB Grade Standard: Industrial Grade Purity: 0.998 Application: carbon steel plate Brand Name: Center Enamel Model Number: 5301 Product Name: Low Temperature Titanium White Enamel Frits Feature...

Thursday 13 August 2020

Semi-automatic Bollard Semi-automatic bollard is used for channel control system with high security but lower use frequency. Semi-automatic bollard is normally suitable for access control system of higher security demand but low frequency. SIZES OF BOLLARD: Diameter of 89mm, 102mm...

Thursday 13 August 2020

Precio : $800-3500

CXT servo motorized speed gate turnstile, it is ideal for high-level places yet has mass throughout daily, like metro, station, airport etc. What are speed gates？ High Speed gates is equipped with triple anti-pinch design: infrared anti-pinch, mechanical anti-pinch and barrier anti-pinch...

Wednesday 12 August 2020

Cantidad : 100000pcs/ - Precio : 0.8-3.7usd/pcs

Underwear refers to close-fitting clothing, including belly pocket, undershirt (long sleeve, short sleeve, vest), shorts, breast, bra, etc., usually direct contact with the skin, is one of the modern indispensable clothing. Underwear has the function of absorbing sweat, straightening...

Saturday 08 August 2020

Vertical feed mixer, which is a small-scale feed processing equipment designed for rural farmers, small-scale farms, small and medium-sized cooperative feed plants, and also has good effects in mixing powder and chemical raw materials. Zhengzhou Fusmar Machinery is a professional...

Saturday 08 August 2020

Precio : US $1 - 3,000 / Set

Basic information of Backflow Preventers(Low Pressure) This valve can strictly prevent the occurrence of backflow pollution, is a safe device to ensure the hygiene of drinking water. Features of Backflow Preventers(Low Pressure) 1. More superior streamline design, energy - saving effect； 2...