ZN7K300——HIGH - 60031 Anuncios

Miércoles 29 junio 2022

Cantidad : 1 square m - Precio : 50USD

A press felt for the press or dewatering section of a paper machine is formed with an inner woven fabric and with a plurality of longitudinally extending, transversely spaced heavy yarns or strands which are supported on the bottom surface of the fabric by a relatively light cross-machine...

Miércoles 29 junio 2022

Cantidad : 1 square m - Precio : 50USD

Polyester synthetic forming fabric is a commonly used filter mesh in the forming section of paper machine, the forming wire can be divided into 1 layer, 1.5 layer, double layer, 2.5 layer, and triple layer forming fabric, in order to increase the work life of the polyester forming fabric...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 10000USD

Advantage of Stainless Steel Cylinder Mould : 1: High speed: Balance detection, more than 700 meters 2: Weight is reduced by 30% compared to ordinary cages, reducing energy consumption 3: Each piece of spoke has been accurately measured to avoid the overweight phenomenon of the cage...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 10000USD

Low Consistency Cleaner Application: HT series low consistency cleaner is suitable for cleaning fiber suspen- sion with the consistency of 0.4-1.2%. It can efficiently remove light impurities, hot melt impurities, heavy impurities, pulp rejects etc. In addition, it can also remove foam plastics...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 10000USD

High Consistency Cleaner Description: High Consistency Cleaner can eliminate heavy impurities larger than 3mm in diameter from recycled paper stock. As a coarse screening equipment,it is usually a down- stream equipment of hydrapulper. It can also be installed as an important equipment...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 1000USD

Description： Fan pumps are used to pump paper pulp, water, sewage, or other liquid media. Used for transporting the paper pulp concentration ≤1% in medium-high speed paper making machine for supplying pulp system. This one set includes pump, underframe for placing pump and standard motor...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 100000USD

1.Fourdrinier open headbox in paper making machine for sale is the key of paper machine,the function is supplying uniform and steady pulp flow to paper machine wire part. 2.The hydraulic headbox (hydraulic full-flow air-cushion combined headbox) is suitable for paper machine with...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 10000USD

Paper Mill Outflow Pressure Screen/Coarse Screen/Fine Pressure Screen Used for fine screening waste pulp and all kinds of coarse and fine pulp. 1. The rotor is rotated outside of the sieve drum, and the heavy impurities flow away from the sieve drum to avoid clogging the screen cut...

Miércoles 29 junio 2022

Dryer screen can be classified depending on weaving struction can be devided into WOVEN type and SPIRAL type. Huatao has developed a wide range of spiral dryer screen to meet each client's needs helping to reduce operation cost through energy efficient solutions. Also called as Spiral...

Miércoles 29 junio 2022

Precio : 100USD

CNC precision machining china is directly changing the size, shape, mutual position, surface roughness or properties of raw materials or semi-finished products to make them into finished products. Including: casting, welding, electroplating, heat treatment, machining and assembly processes...

Miércoles 29 junio 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Miércoles 29 junio 2022

Cantidad : 1200sets/y - Precio : USD10000-200000

ADI300 CNC EDM Machine With Manual Working Table Rise And Fall ADI450 CNC EDM Machine With High Performance For Hard Alloy ADI500 CNC EDM Machine For Automobile Injection Molds ADI600 CNC EDM Machine With Five Axis Control For Aerospace ADI800 CNC EDM Machine With Big Molds ADI1000...

Miércoles 29 junio 2022

Model: YCTL-080 YCTL-150 YCTL-225 YCTL-408 YCTL-800 YCTL-1000 Product Performance Temperature range: 0℃/-20℃/-40℃/-70℃ ~ +150 Pressure range: RP~ 0.5Kpa Temperature fluctuation: +/- 0.5℃(normal pressure) Temperature uniformity: +/- 2℃(normal pressure) Description of High Altitude...

Miércoles 29 junio 2022

Model: YPO-072 Product Performance Temperature range: RT+25℃～200℃/300℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ± 1％℃(200℃)/±2％℃(300℃) Description of Desktop High Temperature Oven The desktop hot air oven temperature controller, a kind of digital hot air oven used on desktop...

Miércoles 29 junio 2022

Model: YNO-100-4 Product Performance Volume: 100L*4 Inner size: 50*45*45(w*h*d) Temperature range: RT+25℃～200℃/300℃/400℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±2％℃ Description of Customized 4 Doors Type Nitrogen Oven The nitrogen oven is a new type of anaerobic...

Miércoles 29 junio 2022

Constant temperature test chamber simulates a full range of temperature and humidity conditions. Temperatures range as low as -73°C with high temperatures to +180°C and humidity ranges from 10% to 98% RH. used when constant climate conditions (temperature and/or humidity) are needed...

Miércoles 29 junio 2022

Coating Parts High Temperature Drying Oven Model: YPO-3155-120 Product Performance Temperature range: RT+25℃～120℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±1％℃ Heat-up time: 15 min Description of Coating Parts High Temperature Drying Oven Precision ovens can provide...

Miércoles 29 junio 2022

Cantidad : 500000PCS/ - Precio : 2000$

Plastic bag roll for food is made of food-grade PP materials, which are mainly used for food sealing and preservation. They are popular with consumers because of their convenient use, cleanliness, and lasting preservation. Soton insists on strictly controlling every production process...

Miércoles 29 junio 2022

Cantidad : 500000PCS/ - Precio : 2000$

What Is CPLA? CPLA cutlery is the most popular tableware in recent years. PLA is a new type of biodegradable material, and CPLA has achieved the characteristics of high-temperature resistance based on ensuring environmentally friendly and biodegradable. This type of biodegradable...

Miércoles 29 junio 2022

Cantidad : 500000PCS/ - Precio : 2000$

Cornstarch disposable starch utensils is made of natural corn starch, plant fiber, and Polypropylene. The cornstarch spoons and cornstarch fork is made of 53% corn starch+47% Polypropylene. The degradation rate can reach 69% under industrial composting conditions after 180 days...

Miércoles 29 junio 2022

Diamond Wire Drawing Die Blanks E-Grind is one of professional PCD wire drawing dies suppliers and diamond dies manufacturers, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns,...

Miércoles 29 junio 2022

Synthetic industrial diamond powder has the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (high compressive strength, good heat dissipation, strong corrosion resistance, low thermal expansion rate) and so on. It has...

Miércoles 29 junio 2022

CVD chemical vapor deposition diamond. The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown on the substrate...

Miércoles 29 junio 2022

Boron Nitride Powder for Sale The solid cbn has a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore, it has high-density characteristics, hardness is slightly lower than that of diamond, and its hardness is second only...

Miércoles 29 junio 2022

CBN micron powder has unique characteristics in thermal stability, working efficiency, and sharpness. It can be used in resin, metal, and vitrified systems, for precise grinding, polishing and finishing workpiece surface, PCBN blank manufacturing. It works as free grinding particles...

Miércoles 29 junio 2022

CBN ranks the second in hardness following Diamond. CBN has premium performance in thermal conductivity, durability and chemical inertness. It is usually used for Ferrous Metal. E-Grind provides all types of CBN material including mesh and micron. Key Feature of Different Types of...

Miércoles 29 junio 2022

Cantidad : 300,000 Se - Precio : 10-60 USD

EMS & electroporation beauty device is a high-end skincare device used for face lifting to provide mesotherapy for face muscles, just like an EMS facial toner. As a multi-functional microcurrent cellulite face muscle stimulator, the cellulite toner lifter massager provides massage...

Miércoles 29 junio 2022

Cantidad : 300,000 Se - Precio : 10-60 USD

This rechargeable wireless head scalp massager is of IPX7 waterproof level for you to enjoy a relaxing pure therapy massage in the shower. This portable head massager is also provided with a dual silicone head that can realize different massage therapy. Although this wireless head...

Miércoles 29 junio 2022

Cantidad : 100+PCS - Precio : USD300-500

AN-SL series is the first all in one street light developed by Anern. The advantage of the all-in-two adjustable led street light is that the size of the solar panel can be changed according to actual application requirements, and the orientation angle of the solar panel can also...

Miércoles 29 junio 2022

Cantidad : 300,000 Se - Precio : 10-60 USD

This rechargeable wireless head scalp massager is of IPX7 waterproof level for you to enjoy a relaxing pure therapy massage in the shower. This portable head massager is also provided with a dual silicone head that can realize different massage therapy. Although this wireless head...