CA Series-330CA30 PEEK Carbon Fiber Reinforcement
Cantidad : 1000Kgs Precio : 400-800CNY
CA Series-330CA30 PEEK FC, CF PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336 ° C) , also can maintain strength at high temperature, to a certain extent, can replace metal materials.
Specification of CA Series-330CA30 Polyetheretherketone Carbon Fiber Reinforcement
|
Material Properties |
Test Method |
Conditions |
Units |
770G |
|
Mechanical Data |
||||
|
Tensile Strength |
ISO 527 |
B reak,23℃ |
MPa |
- |
|
Y ield,23℃ |
MPa |
100 |
||
|
Tensile Elogation |
ISO 527 |
Break,23℃ |
% |
45 |
|
Flexural Strength |
ISO 178 |
Break,23℃ |
MPa |
- |
|
Y ield,23℃ |
MPa |
165 |
||
|
Fleoural Modulus |
ISO 178 |
23℃ |
Gpa |
4.1 |
|
Compressive Strength |
ISO 604 |
23℃ |
MPa |
125 |
|
Charpy Impact Strength |
ISO 179/leA |
Notched |
kJm-2 |
7 |
|
ISO 179/IU |
Unnotched |
kJm-2 |
- |
|
|
Izod Impact Strength |
ISO 180/A |
Notched |
kJm-2 |
7.5 |
|
ISO 180/U |
Unnotched |
kJm-2 |
- |
|
|
Mould Shrinkage |
ISO 294-4 |
Along flow |
% |
1 |
|
Across flow |
% |
1.3 |
||
|
Thermal Data |
||||
|
Melting Point |
ISO 11357 |
|
℃ |
343 |
|
Glass Tansition (Tg) |
ISO 11357 |
Onset |
℃ |
143 |
|
Special Heat Capacity |
DSC |
23℃ |
kj kg-1℃-1 |
2.2 |
|
Coefficient of Thermal Expansion |
ISO 11359 |
Along flow below Tg |
ppm K-1 |
45 |
|
Along flow above Tg |
ppm K-1 |
120 |
||
|
Heat Deflecion Temperature |
ISO 75A-f |
1.8Mpa |
℃ |
152 |
|
Thermal Conductivity |
ASTM C177 |
23℃ |
W m-1K-1 |
0.29 |
|
Flow |
||||
|
MeltIndex |
ISO 1133 |
380℃,5kg |
g10min-1 |
10 |
|
Miscellaneous |
||||
|
Density |
ISO 1186 |
Crystalline |
gcm-3 |
1.3 |
|
Amorphous |
gcm-3 |
1.26 |
||
|
Shore D Hardness |
ISO 868 |
23℃ |
|
85 |
|
Water Absorption(3.2mm thick Tensile Bar) |
ISO 62-1 |
24h,23℃ |
% |
0.07 |
|
by immersion |
|
Equilib riu m,23℃ |
% |
0.4 |
|
Electrical Data |
||||
|
Dielectric Strength |
IEC 60243-1 |
2mm |
kV mm-1 |
23 |
|
Comparative Tracking Index |
IEC 60112 |
|
V |
150 |
|
Dielectric Constant |
IEC 60250 |
23℃,1kHz |
|
3.1 |
|
23℃,50kHz |
|
3 |
||
|
Loss Tangent |
IEC 60250 |
23℃,1MHz |
|
0.004 |
|
Volume Resistivity |
IEC 60093 |
23℃,1V |
Ω cm |
10 16 |
|
275℃ |
Ω cm |
10 9 |
||
As one of peek suppliers, we will do our best to meet all the needs of customers.
Persona a contactar : com zhongyanpeek, (0431)89625588
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de CA Series-330CA30 PEEK Carbon Fiber Reinforcement Buscar en la categoria : Materias primeras Buscar en la categoria : carbon, peek, fiber, 330ca30, reinforcement, series |
201900021 Audio / videoReportar abuso
Lunes 16 septiembre 2013
Cantidad : 22types - Precio : USD30000-USD3000000
Shanghai Jingxiang Advertisement Communication Co. Ltd (Brand--OMDM) The 1st and biggest solution provider in China deals with the Outdoor Mobile LED Advertising Vehicles. Jingxiang (OMDM) is a cultural and technology company which is well-versed in the research and development, production...
Shanghai Jingxiang Advertisement Communication Co.,Ltd
- Lillian123
- 201900021 - Shanghai
- 008618001970686
24158 Bienes de equipoReportar abuso
Jueves 06 agosto 2015
Cantidad : 30 sets
The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...
Sane Kuei Machinery Co., Ltd
- Sane Kuei Machinery Co., Ltd
- 24158 - New Taipei City
- +886285112370
24158 Bienes de equipoReportar abuso
Jueves 06 agosto 2015
Cantidad : 30 sets
The X. Y& Z axes utilize AC servo motors. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...
Sane Kuei Machinery Co., Ltd
- Sane Kuei Machinery Co., Ltd
- 24158 - New Taipei City
- +886285112370
