Car lube oil analysis kit
Precio : $2600 per set
Ⅰ.Product efficacy: | ||
Main Functions:
|
Product Advantages: |
◆Determining the degree of contaminate in lubricants |
◆The quick test realizes an "oil replace based on quality" |
Ⅱ.Product Description: | ||
- THY-22B Oil Quality Analyzer is a portable, intellectualized, small-sized product, The instrument uses a low voltage, micropower signal conditioning and data processing systems, can work to use ordinary AA batteries. It will shut off automatically under unmanned operation or low battery condition .
Mian Features | Technical Specifications | ||||||||||||||
1. small size, portable enable us to use it by hand. 2. Intelligent, auto 0-adjusting user-friendly operation 3. LCD screen, make testing results more intuitive |
|
Ⅲ.Main Benefits: | ||
Saves you time, money, breakdowns.
Accurately measures quality of oil in service.
Shows total contamination of lubricant.
Allows you to safely judge how long the oil can stay in service.
Determines safe and cost effective oil and filter change intervals.
Enables you to safely extend oil change intervals.
Alerts you to potential equipment malfunction and/or failure before it happens.
Saves frequent and unnecessary lab tests - it tells you when and if you need a lab test.
Ⅳ.Application Method | ||
-
Power on
1. Put the analyzer on the horizontal table.
2. Press the key of 【ON】, the analyzer conducting self-checking, and the analyzer enter in standby status after “welcome to use THY-22B ” showed on the LCD screen. Then LCD will go to "TEST? VOLTAGE?" automatically, you can choose oil measurement function or voltage function according to your requirement.
Quick Test(QT)
1.Press key of【QT】, and the LCD shows “CLEAN OIL CHAMBER,ENTER?”, clean the oil chamber with 60-90℃petroleum ether , then wipe the oil chamber with absorbent cotton(twice).
2.Press key of 【ENTER】, the LCD screen shows"SELF-CHECKING, PLEASE WAIT"
3.The LCD screen shows: "PUT PURE,ENTER?" after finishing self-checking, then drip new good oil 4~5 drops (up and down) into the oil chamber, when oil get fully contact in oil chamber,immediately to press key of 【ENTER】, and LCD screen shows" PLEASE WAIT……", and unit enters in status of new oil testing.
4.LCD screen shows" CLEAN OIL CHAMBER, ENTER?" after finishing new oil test, clean the oil chamber with 60-90℃petroleum ether , then wipe the oil chamber with absorbent cotton(twice).
5.Press key of 【ENTER】, the LCD screen shows"SELF-CHECKING, PLEASE WAIT"
6.The LCD screen shows: "PUT OLD,ENTER?" after finishing self-checking, then drip measured oil 4 ~5 drops (up and down) into the oil chamber, when oil get fully contact in oil chamber, immediately to press key of 【ENTER】, and LCD screen shows" PLEASE WAIT……", and unit enters in status of contaminated oil testing.
7.The LCD screen shows detecting result as following:
a.When showing "VALUE= ***.*%, TEST OK Continue to Use! ", it indicates the quality of your oil is in good condition, so the oil can be continued to use.
b.When showing "VALUE= ***.*%, Use or Change!", it indicates the quality of your detected oil is close to value of the scrap oil, but is still qualified, so the oil can be continued to use or change
c.When showing "VALUE= ***.*%, change oil!", it indicates the oil is out of standardand you must change oil at once.
8.Press key of 【ENTER】after finishing test, the LCD screen shows" CLEAN OIL CHAMBER, TEST? VOLT? POWER OFF?"
9.You can choose oil measurement or voltage measurement or power off according to your requirement.
Remark:
1.If testing value is between "0-50', which means the detected oil can be continue to use.
2.If testing value is between "50-80', which means the detected oil can be continue to use or change.
3.If testing value is more than "80", which means you must change oil at once.
VOLTAGE
1.Press key of 【VT】,the LCD screen shows operating voltage, normal operating voltage is “3.0—3.2V”.
2.LCD screen will shows " LOW VOLT, REPLACE" when your batteries run low.
3.LCD screen shows " INSUFFICIENT VOLT" when voltage is lower than operating voltage.
4.Press key of 【ENTER】after finishing test, LCD screen shows" TEST?VOLT? POWER OFF?"
5.You can choose oil measurement or voltage measurement or power off according to your requirement.
Ⅳ.Applications: | ||
Persona a contactar : Lawrence Chang, 86 29 86691978
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Car lube oil analysis kit Buscar en la categoria : Bienes de equipo Buscar en la categoria : lube, analysis |
Martes 20 diciembre 2016
Cantidad : 30pcs - Precio : 218,00 €
Advantages: 1.Comes with 3-Prong AC input plugs which you could feel free to use our online UPS without any safety concerns! 2.Able to fit with inverter for changing into 220V output, which you could directly charger your AC devices with any extra connectors/adapters. 3.2 Ways...
Shenzhen Believe Technology Co.,Ltd
- 86 - BaoAn District
- 008613590311520
Martes 10 marzo 2020
GENERAL: El KDM-920 es un conjunto combinado compacto de empaquetadora automática de blister (Modelo: KDB-120) y máquina de encuadernación automática (Modelo: KDM-900). Esta máquina comienza su producción de productos de envasado en blíster y luego se inserta en la máquina de encuadernación...
Kwang Dah Enterprise Co., Ltd.
- 24874 - New Taipei City,
- 886 2 2971 3333
Jueves 06 mayo 2021
TRITURADOR COMAFER MAC 600 SUPER Este triturador es ideal para carpinteros de tamaño medio. Moler restos de madera de carpintero con una humedad mín./máx. 8-17%. Los residuos de tierra se pueden aspirar gracias a la boquilla adecuada proporcionada y transportada junto con virutas...
DUMBO SRL
- 52011 - Bibbiena (Ar)
- 00390575536588
- +393355321306