Carbon Black
Carbon black is a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black in tires is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics.
Specification of Carbon Black
|
Standard |
N110 |
N115 |
N121 |
N134 |
N219 |
N220 |
|
|
||||||
|
Item |
||||||
|
Ioding AdsorptionNumber g/kg |
145±8 |
160±8 |
121±7 |
142±8 |
118±7 |
121±7 |
|
DBP Absorption Number 10-5M3/kg |
113±7 |
113±7 |
132±8 |
127±7 |
78±7 |
114±7 |
|
DBP Compressed Sample10-5M3/kg |
89-105 |
89-105 |
103-119 |
95-111 |
67-91 |
90-106 |
|
CTAB surface Area103M2/kg |
117-135 |
119-137 |
112-130 |
124-144 |
98-116 |
102-120 |
|
Nitrogen Surface Area103M2/kg |
120-134 |
129-145 |
115-129 |
135-151 |
109-123 |
112-126 |
|
Tint Strength % |
115-131 |
115-131 |
111-127 |
123-139 |
115-131 |
108-124 |
|
Heating Loss %≤ |
3 |
3 |
3 |
3 |
2.5 |
2.5 |
|
Ash Content % |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
|
45μm Sieve Residue % ≤ |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
|
500μm Sieve Residue % ≤ |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
|
Impurity |
no |
no |
no |
no |
no |
no |
|
stress at 300% Elongation Mpa |
-3.5±1.6 |
-3.4±1.6 |
-0.4±1.6 |
-1.8±1.6 |
-3.9±1.6 |
-2.3±1.6 |
|
Characteristics of vulcanized rubber |
N110: High reinforcing, super abrasion |
|||||
|
N115: High reinforcing, super abrasion |
||||||
|
N121: High reinforcing, super abrasion, high modulus |
||||||
|
N134: High reinforcing |
||||||
|
N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance |
||||||
|
N220: High reinforcing, high tear resistance, good processing |
||||||
|
Standard |
N375 |
N539 |
N550 |
N660 |
N762 |
N774 |
|
|
||||||
|
Item |
||||||
|
Iodine Adsorption Number g/kg |
90±7 |
43±6 |
43±6 |
36±6 |
27±6 |
29±6 |
|
DBP Absorption Number 10-5M3/kg |
114±7 |
111±7 |
121±7 |
90±7 |
65±6 |
72±7 |
|
DBP Compressed Sample10-5M3/kg |
88-104 |
73-89 |
77-93 |
66-82 |
53-65 |
57-69 |
|
CTAB surface Area103M2/kg |
87-105 |
34-48 |
35-49 |
29-43 |
23-35 |
23-35 |
|
Nitrogen Surface Area103M2/kg |
86-100 |
33-45 |
34-46 |
29-41 |
24-34 |
25-35 |
|
Tint Strength % |
106-122 |
- |
- |
- |
- |
- |
|
Heating Loss %≤ |
2.5 |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
|
Ash Content % |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
|
45μm Sieve Residue % ≤ |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
|
500μm Sieve Residue % ≤ |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
|
Impurity |
no |
no |
no |
no |
no |
no |
|
stress at 300% Elongation Mpa |
0.1±1.6 |
-1.6±1.6 |
-0.9±1.6 |
-2.6±1.6 |
-4.9±1.6 |
-4.1±1.6 |
|
Characteristics of vulcanized rubber |
N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion |
|||||
|
N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion |
||||||
|
N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion |
||||||
|
N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup |
||||||
|
N762: low reinforcing |
||||||
|
N774: semi-reinforcing, good elongation, high resilience, low compressed deformation |
||||||
|
|
N234 |
N326 |
N330 |
N339 |
N347 |
N351 |
|
|
||||||
|
|
||||||
|
|
||||||
|
Item |
||||||
|
Coding Adsorption Number g/kg |
120±7 |
82±7 |
82±7 |
90±7 |
90±7 |
68±7 |
|
DBP Absorption Number 10-5M3/kg |
125±7 |
72±7 |
102±7 |
120±7 |
124±7 |
120±7 |
|
DBP Compressed Sample10-5M3/kg |
94-110 |
62-74 |
80-96 |
91-107 |
91-107 |
87-103 |
|
CTAB surface Area103M2/kg |
110-128 |
74-92 |
73-91 |
84-102 |
78-96 |
64-82 |
|
Nitrogen Surface Area103M2/kg |
112-126 |
71-85 |
71-85 |
84-98 |
78-92 |
64-78 |
|
Tint Strength % |
115-131 |
103-119 |
96-112 |
103-119 |
97-113 |
92-108 |
|
Heating Loss %≤ |
2.5 |
2.5 |
2.5 |
2.5 |
2.5 |
2.5 |
|
Ash Content % |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
|
45μm Sieve Residue % ≤ |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
|
500μm Sieve Residue % ≤ |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
|
Impurity |
no |
no |
no |
no |
no |
no |
|
stress at 300% Elongation Mpa |
-0.4±1.6 |
-3.9±1.6 |
-0.9±1.6 |
0.6±1.6 |
0.2±1.6 |
0.8±1.6 |
|
Characteristics of vulcanized rubber |
N234: High reinforcing, high abrasion, high modulus, good dispersion |
|||||
|
N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance |
||||||
|
N330: medium-high reinforcing and modulus, good processing |
||||||
|
N339: medium-high reinforcing, high modulus and hardness, good processing |
||||||
|
N347: medium-high reinforcing, high modulus and hardness, good processing |
||||||
|
N351: medium-high reinforcing, high modulus and hardness, good processing |
||||||
Application of Carbon Black
Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber products.
As one of carbon black suppliers, we can offer kinds of carbon black N220, carbon black N330 and carbon black N660 for sale, anything you need, please leave us a message.
YuSheng Enterprise Limited is established in 2001, we have been devoting in producing and marketing for raw materials to tires and rubber products for more than 20 years. Through decades' developments and expansions, Yusheng has become the experienced rubber raw material manufacturer in rubber products fields, we have been supplying and serving with reputed tire companies, rubber hose and conveyor belts manufactures in European, South Americans, Southeastern-Asian, India, Pakistan and the Mid-East areas etc. Our Main products include tyre cord fabrics, steel wires, rubber additives and filament yarns/cords, synthetic rubber, etc.
Persona a contactar : ZHANG JONSEN , +86 18366366563
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
|
Esta página es acerca de los importadores y exportadores de Carbon Black Buscar en la categoria : B2B Servicios Buscar en la categoria : carbon, black |
659582 AlimentaciónReportar abuso
Viernes 02 julio 2010
Cantidad : FCL - Precio : FOB
We can supply RBD Palm oil is decent quantity with high quality. Our oil grade is CP 8 and we export from Malaysia.Ubicación : 3 , Bukit Batok St 22 , #01-01, 659582 Singapore, Persona a contactar : Mohan Sinapillay, 65 62717030
Sunvision Marketing Pte Ltd
- sunvisionmarketingpteltd
- 659582 - Singapore
- 65 62717030
- 65 97887205
Varios / DescuentoReportar abuso
Lunes 27 agosto 2007
Cantidad : MIN.100,00 - Precio : competitive
our company is a professional manufacturer and export company specializing in supplying screws, bolts, nuts, washers, and various hardwares with high quality and competitive prices in Taiwan.Ubicación : , kaohsiung, Persona a contactar : Laurance Lee, +88 6 76 22 52 55
CHIN HO HARDWARE CO.,LTD
- sales.chinho
- - kaohsiung
- +88 6 76 22 52 55
1105 AlimentaciónReportar abuso
Sábado 18 julio 2009
Cantidad : Export Vol - Precio : For Direct Communica
High quality, un-adulterated processed meat items, customized sauces/gravies/dips, spice blends and customized seasonings for meat, snacks, sardines, poultry products and seafoods.Ubicación : 129 Bansalangin St., Veterans Village, Project 7,, 1105 Quezon City, Persona a contactar : J...
JOAX INGREDIENTS & Food Development Corp.
- jdamor
- 1105 - Quezon City
- +632 3321254
