Bienes de equipo

CHARGE AIR COOLER/INTERCOOLER

Intercooler

Intercoolers are generally only visible when a turbocharged car is installed. Because the intercooler is actually a turbocharged accessory, its function is to improve the engine's ventilation efficiency. For supercharged engines, the intercooler is an important component of the booster system. Whether it is a supercharged engine or a turbocharged engine, an intercooler needs to be installed between the supercharger and the engine intake manifold. Since this radiator is located between the engine and the supercharger, it is also called intercooler.

Working principle of Intercooler

By using a well-designed intercooler can get an extra 5% - 10% power.
There are also some cars that use overhead air coolers to obtain cooling air through the openings in the bonnet, so before the car starts, the intercooler will only be blown by some hot air blown from the engine compartment, although the heat dissipation efficiency It is affected, but because the intake air temperature will rise under such circumstances, the engine's fuel consumption will drop a lot, which indirectly reduces the engine's working efficiency, but for a powerful supercharged car, it is too large. The power-induced start-up instability will be mitigated in this case, and Subaru Subaru's Impreza is typical of overhead intercoolers. In addition, the biggest advantage of the overhead intercooler layout is that it can effectively shorten the stroke of compressed gas reaching the engine.

The reasons why an intercooler is in need

One of the reasons why a turbocharged engine has more power than a normal engine is that its ventilation efficiency is higher than that of a normal engine. When the air enters the turbocharger, its temperature will rise sharply and the density will increase accordingly. The intercooler acts as a cooling air. The high temperature air is cooled by the intercooler and then enters the engine. If the intercooler is lacking and the pressurized high-temperature air enters the engine directly, the engine may be damaged or even dead due to excessive air temperature.

Since the temperature of the exhaust gas discharged from the engine is very high, the heat transfer through the supercharger increases the temperature of the intake air. Moreover, the density of the air increases during the process of being compressed, which inevitably leads to an increase in the temperature of the air, thereby affecting the charging efficiency of the engine. If you want to further increase the charging efficiency, you should lower the intake air temperature. According to the data, the engine power can be increased by 3% to 5% for every 10 °C decrease in the temperature of the charge air under the same air-fuel ratio.

If the uncooled charge air enters the combustion chamber, it will affect the engine's charging efficiency, and it will easily lead to excessive engine combustion temperature, causing knocking and other faults, and increase the NOx content in the engine exhaust gas, resulting in air. Pollution. In order to solve the adverse effects caused by the warmed air temperature, it is necessary to install an intercooler to reduce the intake air temperature.

Maintenance method of Intercooler:

The air-cooled intercooler is installed together with the intercooler radiator
of the water tank, and is installed in front of the engine, and is cooled by the suction fan and the surface wind driven by the automobile. If the intercooler is poorly cooled, the engine power is insufficient and the fuel consumption is increased. The intercooler should be inspected and maintained regularly. The main contents are: external cleaning (on the car cleaning method):

Since the intercooler is installed at the forefront, the intercooler fin passage is often blocked by leaves, sludge (hydraulic oil that is spilled into the tank), and the intercooler is blocked from heat, so it should be cleaned regularly. The cleaning method is to use a water gun with a low pressure to hang down from the top to the bottom or from the bottom to the bottom of the intercooler, but never slant to prevent damage to the intercooler. Internal cleaning, inspection (demolition cleaning method):
The internal of the intercooler are often accompanied by dirt such as sludge and colloid, which not only narrows the air flow passage, but also reduces the cooling heat exchange capacity. Therefore, maintenance and cleaning must also be performed. - The interior of the intercooler should be cleaned and inspected at the same time as the engine is overhauled and the tank is repaired.

Ubicación : 35 Huashan Road, Gaochun Economic Development Zone, Nanjing , 211300 Nanjing ,
Persona a contactar : Wei Jiang , +86 25 52129310

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
CHARGE AIR COOLER/INTERCOOLER

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
intercooler, charge, cooler
Francia 255086 Materias primeras
Refractory ceramic fiber paper

Martes 16 junio 2015

Cantidad : 100 roll

JC-Paper Series Refractory ceramic fiber paper sealing gasket Product Application: 1.Asbestos paper replacement 2.Investment cast mold wrap insulation 3.One-time consumable insulating applications 4.Back-up lining for metal troughs 5.Hot top lining 6.Applications where low...

Zibo JC Eco-Tech Co., Ltd

  • 255086 - China
  • +86 15505335058
  • +86 533 3593322
Francia 42000 Audio / video
Palettes Destockage Electroménager - HIFI - HIGH TECH , Retour

Jueves 28 mayo 2015

Precio : 2 500,00 €

Ce lot est composé de produits ayant fait l'objet de retour client, avarie transport, défaut d'emballage, etc . . . Nous n'avons pas ouvert, ni testé ces articles, ils peuvent donc être abimés, incomplets. Aucun retour, échange ou remboursement n'est possible sur ce déstockage...

NOVA FORCE

  • 42000 - SAINT ETIENNE
  • 06243501
  • +33 6 24 35 01 35
Rumanía 437.080 Materias primeras
Pellets de madera Din plus (PREMIUM) / ENplus-A1 de pellets de madera lleno de 15kg

Jueves 17 diciembre 2015

Cantidad : 5000 tons - Precio : 90EUR

Somos fabricante directo y principal proveedor de 6mm pellets de madera estándar europeo, de 8 mm con un contenido de humedad: <</span>7% y el valor calorífico: <</span>4.7kWh / kg. ESPECIFICACIONES PARA pellets de madera: 1. Uso: Casa Calefacción 2. Hecho de...

ECO ENERG LEMN SA

  • 437.080 - Maramures
  • 262370937