PRINCIPLE - 4353 Anuncios

Wednesday 18 October 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Wednesday 18 October 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Wednesday 18 October 2017

Brief Introduction. Advantages. 1.Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency. 2.When steam pressure changes, the ball float can adjust the opening of valve seat without influence, and so it is stable. 3.With automatic...

Wednesday 18 October 2017

Brief Introduction. TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design. Structural Characteristic. 1.Assembled with steam or air heat preservation...

Wednesday 18 October 2017

Features: Pilot operated safety valve, newly-structured, is mainly applied to such industries as petroleum&natural gas, chemistry, electric, metalurgy&burning gas. It is the best super-pressure protecting equipment on press equipment, container, or pipeline. It is mainly...

Wednesday 18 October 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Wednesday 18 October 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Wednesday 18 October 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Tuesday 17 October 2017

Fabric anti-drilling velvet tester Mainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a variety of fabrics to prevent drilling or feathers from the joints between the drilling performance. Meet the standard: GB / T 12705 The main parameters...

Tuesday 17 October 2017

Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and...

Tuesday 17 October 2017

Fiber Impurity Analyzer / MK2 Fiber Impurity Analyzer is a special instrument for measuring the impurity content of fiber. It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, impurities and Dust content. Supply: Shanghai...

Tuesday 17 October 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Tuesday 17 October 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...

Sunday 15 October 2017

- Fido high-performance rotary dampers - The perfect balance between quality, durability and unit price At Fido Motion Control, we provide the most reliable and durable rotary dampers, dedicated to help you to make superior products. Fido dampers are designed for providing controlled...

Saturday 23 September 2017

Cantidad : 1 - Precio : 2500USD

In fish farming, the consumption of feeds in pellet form aids the total consumption of the ingredients by fishery. Nevertheless, some local farmers in Nigeria are using pelletized feeds in their various farms because of the reduced cost. However, some readily identifiable disadvantages...

Saturday 23 September 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...

Saturday 16 September 2017

Cantidad : 9999999999 - Precio : USD 888/PC

AB 1771WH N.S.E.Automation is a powerful leading global industrial supplier in China, specializing in automation control system module and spare parts with many years. Our company can supply a full range of products with high quality, and slso an affordable cost. Our business principle...

Saturday 16 September 2017

Cantidad : 20 PCS - Precio : USD 888/PC

AB 1794-ACN15 N.S.E.Automation is a powerful leading global industrial supplier in China, specializing in automation control system module and spare parts with many years. Our company can supply a full range of products with high quality, and slso an affordable cost. Our business...

Thursday 14 September 2017

Static tensile tester Application Used for static tensile test of elastic fabric performance, adopts aviation aluminum frame design, 304 stainless steel clamp, and weight, excellent imported guide rail, compact structure, stable performance, which is the economic strength test instrument...

Thursday 14 September 2017

Rubber Din Abrasion Tester The main purpose: Din rubber abrasion testing machine is mainly used for the abrasion resistance detection of an elastic material, conveyor belts, rubber, tires, shoe soles, synthetic leather and other soft materials. Standard： DIN 53516, JIS K6369 ，GB/T...

Thursday 14 September 2017

Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of standard test cloth surface of the material / coating to angle standards for automatic circulating friction. Test conditions can be customized...

Thursday 14 September 2017

Dynamic QS Filter Tester It is Suitable for professional filter test. Filtration performance tester is used to evaluate the baghouse filter and bag dynamic and static dust removal efficiency, filter performance test instrument designed by the analog filter in the actual use of the real situation...

Tuesday 12 September 2017

Rapid Grease Extraction Apparatus Testing Standards of Rapid Grease Extraction Apparatus: Edana method ERT 155 Applications: Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and evaporation...

Friday 08 September 2017

Cantidad : 10 - Precio : USD200000

)is one of the main applications of metal 3D printing, which is suitable for powder forming of titanium , aluminum , stainless steel, cobalt chromium alloy and so on. The principle of 3D printing is to slice the model and import the data into the printer to laser sintering layer by layer...

Friday 08 September 2017

Cantidad : 10 - Precio : USD200000

is one of the main applications of metal 3D printing, which is suitable for powder forming of titanium , aluminum , stainless steel, cobalt chromium alloy and so on. The principle of 3D printing is to slice the model and import the data into the printer to laser sintering layer by layer...

Wednesday 06 September 2017

MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics. Product Information: Fabric...

Tuesday 05 September 2017

Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree...

Tuesday 05 September 2017

A six station Colorfastness/Rubbing Tester used to determine crocking, color transfer, and abrasion resistance of leather, fabric, vinyl, stitched seams, plastics and other materials. Each station is equipped with a removable rub head and set of table clamps to facilitate up to six...

Tuesday 05 September 2017

Reciprocating abrasion tester Brief Introduction Reciprocating abrasion tester used by way of rotary grinding, using different kinds of friction wheel rotational friction on the sample to detect wear performance for leather and plastic materials, make scientific evaluation of the...

Friday 01 September 2017

Gelbo Flex flexing chamber is designed to measure the amount of fiber debris of non-woven fabrics in the dry state in accordance with ISO9073-10. It can be used to test dry lint fall performance of non-woven raw material and other textile materials. Test principle: the sample in the...