ADDITIVES - 1661 Anuncios

Miércoles 01 noviembre 2023

Precio : ¥20-1000w

DSXL devolatilization technology improves product quality and reduces cost. Technology Introduction of Devolatilizer Based on the characteristics of polymer and the rich application experience of static mixer and high-efficiency heat exchanger, DODGEN has designed single-stage or...

Miércoles 01 noviembre 2023

Precio : ¥20-1000w

DSXL devolatilization technology improves product quality and reduces cost. Devolatilization Technology Introduction Based on the characteristics of polymer and the rich application experience of static mixer and high-efficiency heat exchanger, Dodgen has designed single-stage or...

Jueves 26 octubre 2023

Aluminium turned parts are precision components made from aluminum using computer numerical control (CNC) turning technology. Aluminum is a lightweight, durable, and corrosion-resistant material that is widely used in various industries. With CNC turning, aluminum parts can be produced...

Jueves 26 octubre 2023

Precio : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Jueves 26 octubre 2023

Precio : USD900-USD2000/MT

High melt point -high melt wax is very suitable for making cylindrical candles, hand-dipped fine candles, moulded candles, moulded or carved gift candles. High melt wax is very hard and cannot retain its fragrance. Its melting point is 145 degrees Fahrenheit or 63 degrees Celsius...

Miércoles 25 octubre 2023

PP white masterbatch is a polymer additive that is specially designed for polypropylene resins. It is used to enhance the properties of polypropylene-based plastic products, such as color, UV resistance, flame retardance, and antimicrobial properties. pp color masterbatch is added...

Miércoles 25 octubre 2023

Polyethylene hdpe masterbatch is a type of polymer additive that is used to enhance the properties of polyethylene-based plastic products. It is added to the base polymer during processing to improve properties such as color, UV resistance, flame retardance, and antimicrobial properties...

Miércoles 25 octubre 2023

Fluorescent Whitening Masterbatch is a type of additive used in the plastic industry to improve the whiteness and brightness of plastic products. It is also known as Optical Brightening Agents (OBAs). Fluorescent whitening agents are designed to absorb light in the ultraviolet range...

Miércoles 25 octubre 2023

Nucleating Masterbatch usingα-type nucleating agents can accelerate the crystallization rate of polypropylene (PP) and significantly enhance the rigidity and heat resistance of the resulting thermoplastic products. This prevents softening during boiling water heating and ensures...

Miércoles 25 octubre 2023

Non-woven masterbatch is a type of additive used in the production of non-woven fabrics. It is designed to improve the overall functionality, durability, and aesthetic appeal of non-woven materials. pp non woven masterbatch are typically made from a variety of thermoplastic polymers...

Miércoles 25 octubre 2023

YG Tape's Hot Melt Adhesive series is a popular adhesive choice for a variety of applications. It's a prevalent choice for its easy application and fast drying time. Our hot melt adhesive is suitable for a large number of substrates and can be used for bonding a variety of materials...

Sábado 21 octubre 2023

Waste Plastic Recycling Machine Guowang Eco Technology Specializes in Plastic & Textile Recycling Machine Guowang has been paying attention to the reuse of mixed waste plastics for 20 years, and has a relatively deep understanding of mixed waste plastics. Guowang Eco Technology...

Sábado 21 octubre 2023

Cantidad : 10mg-10t - Precio : 50-15000

EDTA Acid Dipotassium Salt Dihydrate is a very important anticoagulant in vacuum blood tubes. EDTA has a great affinity for calcium ions in blood, and can complex with calcium ions, so that prothrombin can not be converted into thrombin, so that blood anticoagulation. Introduction...

Sábado 21 octubre 2023

Cantidad : 10mg-10t - Precio : 50-15000

What Additive is in a Blood Culture Tube? Additives in blood collection tubes play an important role in blood collection/vacuum blood collection. According to different functions of blood collection tube additives, they could be separated into blood anticoagulation, blood coagulation...

Sábado 14 octubre 2023

D Calcium Pantothenate D-calcium pantothenate is a white powder that is odorless, slightly bitter in taste, and hygroscopic. The aqueous solution of the pantothenate calcium is neutral or weakly alkaline. It is easily soluble in water, slightly soluble in ethanol, and almost insoluble...

Viernes 13 octubre 2023

Organic dextrose is a product containing a clean water obtained by liquefying and saccharifying the glucose solution obtained from starch or starch as raw material, and then refining, concentrating and cooling crystallization. Pekhill's organic dextrose monohydrate powder is produced...

Jueves 12 octubre 2023

Sticks for Cats to Chew High quality protein, delicate and easy to digest, giving pets healthy and delicious food. Natural cod meat is selected as the main raw material, which tastes delicious and does not contain artificial additives Guaranteed Analysis of Chew Sticks for Kittens...

Jueves 12 octubre 2023

High quality protein, delicate and easy to digest, giving pets healthy and delicious food. Natural chicken meat is selected as the main raw material, which tastes delicious and does not contain artificial additives Guaranteed Analysis of Cat Chicken Sticks Crude protein ≥13% Crude...

Jueves 12 octubre 2023

Precio : USD3000-4000

HPMC (Hydroxypropyl methylcellulose) is a commonly used additive in detergents to improve their performance and quality. HPMC is a water-soluble methyl cellulose ether that is derived from cellulose, and it can be added to detergent formulations as a powder or a liquid. HPMC Uses...

Martes 10 octubre 2023

custom rubber magnets is one of the ferrite magnet series. It is a soft, flexible and twistable magnet made of bonded ferrite powder compounded with synthetic rubber through extrusion, calendaring and injection molding processes. It can be processed into strips, rolls, sheets, blocks...

Lunes 09 octubre 2023

Keyplast has efficient team with many years' experience of injection moulding, while medical industry is one of our mainly focused industries. With our deep insight into the medical injection moulding industry, MacroMedics approaches to Keyplast for injection moulding service in the...

Lunes 09 octubre 2023

Precio : USD1-1000

Kaiping healthwise's wholesale Plant extract is a natural botanical extracts formed by the natural plant as the raw material. In a bulk plant extract factory, according to the use of the extracted final product, through the physical and chemical extraction and separation process,...

Lunes 09 octubre 2023

Precio : USD1-1000

Nutrient oil come from many different plants and provide you with important nutrients. They are derived from a variety of natural sources, like plant seed oils and more. They're arguably the best known sources of the essential fatty acids that are critical for human health. Essential...

Lunes 09 octubre 2023

Precio : USD1-1000

Natural oils, extracted from a different plants. The botanical extract oil offered by China essential plant oil manufacturers, are used in high-quality health care products, botanical oils wholesale benefit people with their precious ingredients, support its natural protective barrier...

Lunes 09 octubre 2023

Precio : USD1-1000

Natural food ingredients and natural food additives are any substance that is added to a food to achieve the desired effect. China natural food ingredients supplier provides convenience and allows food makers to produce a wide variety of foods that are safe, appetizing, uniform, nutritious...

Lunes 09 octubre 2023

Stereo lithography Appearance (SLA) is a member of the vat photopolymerization family of processes for additive manufacturing. In Stereo lithography Appearance (SLA), UV lasers are used as the light source to selectively cure a polymer resin. RSPro Series The RSPro range of stereolithography...

Lunes 09 octubre 2023

Large SLA 3D Printer RSPro2100 is our largest format SLA 3D machine printer. There are three laser scanning, this innovative scanning additive manufacturing system is perfectly suited for the industrial production of large, high quality finished parts as well as mass part production...

Domingo 08 octubre 2023

BTL Conductive Ink is an innovative and versatile product made from a spot of conductive, silver-based ink. It is a great solution for applications that require an efficient and cost-effective way to create a conductive path between different components. With its easy-to-use formulation...

Miércoles 27 septiembre 2023

Our products are designed to offer a reliable and safe solution for feed producers looking to improve the quality of their feed. Our lactic acid products are carefully formulated to reduce stress and improve the overall quality of the feed. With our products, feed producers can rest...

Miércoles 27 septiembre 2023

Precio : 200,000 USD~1,500,00

Eplus3D Polymer 3D SLS Aluminium Printing Machines and Materials For Your Needs Eplus3D SLS polymer 3D printers are flexible machines for industrial grade production and research. We also provide advanced processes for industrial SLS 3D printing with the most various polymer materials optional...