RAYCASTINGS - 54 Anuncios

Martes 09 agosto 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Martes 09 agosto 2022

Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting process is a different...

Martes 09 agosto 2022

Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as early as 6,000 years ago. This technology has been attained the prime in China during 1,700 ~ 1,000 B.C, producing the bronze ware mainly at that time...

Martes 29 marzo 2022

The vacuum pressure casting, as this name indicates, is casting method which the major processes including the melting, pouring, solidifying are performed inside the vacuum chamber. The vacuum is able to minimum the gas content of the product, and prevent further oxidation happening to the metal...

Martes 29 marzo 2022

The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier...

Martes 29 marzo 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Martes 29 marzo 2022

Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in white powder, non toxic and non-inflammable. It is suluble in water in various amount. A more common name for sodium silicate is water glass...

Martes 29 marzo 2022

The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand and several other materials. The silica sol is applied to both sand casting and investment casting technics. It is one of the most common...

Martes 29 marzo 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die casting is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and...

Martes 29 marzo 2022

Vacuum investment casting is one of the precision investment casting methods. This special technic is mainly applying to producing the small but high requirements casting items such as aircraft parts, jewelry, and accessories. The term, vacuum investment casting, refers to the process...

Martes 29 marzo 2022

Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and applied over 30 years world wide. The main principle of this technic is to perform a strong stir during the metal phase change from liquid to solid...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Sand casting is able to produce the part varying from several gram weight to dozens of tons, or...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push the...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

The lost-wax casting process can differ depending on the application and the requirement, but it generally consists the following steps: Molde-making, creating a mold, producing wax patterns, assembling the wax pattern, applying investment materials, burnout, pouring, decesting, finishing...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions. The mold is applied...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

The Die Castng involvs 3 key elements: die casting machine, the mold and the alloy materials, the die casting could be described as the process of combining pressure, speed and time to achieve a ideal casted meatal part. The pressure applied during the casting process is the different...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as early as 6,000 years ago. This technology has been attained the prime in China during 1,700 ~ 1,000 B.C, producing the bronze ware mainly at that time...

Sábado 09 octubre 2021

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi solid die casting technic has been further developed and applied over 30 years world wide. The main principle of this technic is to perform a strong stir during the metal phase change from liquid to solid...

Sábado 09 octubre 2021

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Sábado 09 octubre 2021

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push the...

Sábado 09 octubre 2021

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Sábado 09 octubre 2021

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

The Die Castng involvs 3 key elements: die casting machine, the mold and the alloy materials, the die casting could be described as the process of combining pressure, speed and time to achieve a ideal casted meatal part. The pressure applied during the casting process is the different...