PARAMETERS - 9133 Anuncios

Sábado 04 noviembre 2017

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the...

Sábado 04 noviembre 2017

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples...

Sábado 04 noviembre 2017

The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the specimen under standard atmospheric conditions and to maintain the specified time. The overall structure of the instrument and the precise spiral column ensure that the loaded specimens produce...

Sábado 04 noviembre 2017

The vibration fiber fineness tester works based on the stringprinciple. First, it measures the natural vibration frequency of the fiber with known vibration fiber length and tensile force, then automatically calculates the linear density of the single fiber. The fineness measurement range is 0...

Sábado 04 noviembre 2017

The Tester is used to determine the UV transmittance and anti-ultraviolet performance of textiles. You can directly obtain the UV protection factor of textiles UPF. 1. BS 7914：1998 Method of test for of erythemally weighted solar ultraviolet radiation through clothing fabrics. 2....

Sábado 04 noviembre 2017

Fabric tensile tester is suitable for testing the tensile and elastic properties of the high elastic fabric and the low elastic fabric such as the amount of tensile deformation and the amount of elastic recovery. It can not only be used to evaluate the tensile and elastic properties...

Sábado 04 noviembre 2017

Fabric water vapour permeability testing apparatus is for assessment of the water vapour permeability ability of fabrics by moisture permeable cup moisture absorption method. The instrument is used to determine moisture (steam) permeability of various types of fabrics (including moisture...)

Sábado 04 noviembre 2017

Standards Application ISO 5660 Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15 Fire tests on building materials and...

Sábado 04 noviembre 2017

The new high efficiency filter material filtration performance tester uses the current international mainstream particle counting method, the high efficient large flow laser particle counter to test the basic filtration performance parameters of filter material, such as filtration efficiency...

Sábado 04 noviembre 2017

The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageing The exposure test of the sample was carried out in a fluorescent UV lamp vessel in a controlled environment. It can simulate and strengthen the environmental...

Sábado 04 noviembre 2017

Technical Parameters： It's great significant for AFC-133 filter test bench to optimize and develop filter materials, ensure quality assurance of the production process. Dust capacity and filtration efficiency are the most interesting properties of filter material properties, depending...

Sábado 04 noviembre 2017

Light transmittance test machine for fabric is used to determine the total visible light transmittance of the fabric to evaluate the shading properties of the fabric and is suitable for sheet textile products such as curtains. Test standard : JIS L1005-2009 Test principle: 1. A light...

Sábado 04 noviembre 2017

Single-arm material testing machine is widely used in various types of metal, metal, rubber and plastic, footwear, leather, clothing, textiles, insulators, wires, cables, terminals ... and other materials to test its tensile, Peeling, compression, bending, anti-shear, three-point bending ...

Jueves 02 noviembre 2017

Cantidad : 999 - Precio : 1137$

The parameter of the oca laminator machine: Model No. ZT-016 Size 40*38*36CM Size of the workbench 13inch Funtion LCD screen refurbishing weight 50K More details of the oca laminator machine : FAQ 1) How many years warranty you give me ? We supply one year warranty and technology support forever...

Jueves 02 noviembre 2017

HSK63 Toolholder Tightening Fixtures BT40 Tool Holder Locking Stand This tool holder tightening fixture is specifically designed for the HSK-63F, HSK-63E HSK-63A toolholders and for ISO40, BT40 toolholders. Roller-bearing design for non-keyway toolholder tightening and loosening....

Miércoles 01 noviembre 2017

Product function of New-Blue 40-HI SMART DISPENSER Self-stop Quantitative Quick Preset dispensing Waterproof and dust-proof Overall parameter of New-Blue 40-HI SMART DISPENSER L*W*H（mm) : 520*309*396 Net weight ：27KG Gross weight ：32KG Basic configuration of New-Blue 40-HI SMART DISPENSER...

Viernes 27 octubre 2017

Cantidad : 1000

S&A industrial water chillers CW-6300 support ModBus communication CW-6300 chiller is producing by S&A company. S&A has independent R&D on sheet metal, evaporator, condenser and cores parts of chiller. With 15 years development, gradually grow as the industry standard...

Viernes 27 octubre 2017

Cantidad : 1000

S&A water chiller system CW-6200 with 5.1KW cooling capacity CW-6200 series is high-precision compression refrigeration water chiller producing by S&A company. S&A has complete material purchasing ecosystem and independent R&D on sheet metal, evaporator, condenser...

Viernes 27 octubre 2017

Cantidad : 1000

S&A industrial compressor refrigeration chiller CW-6100 factory S&A chiller CW-6100 is developed and produced by S&A company. With 15 years development, gradually grow as the industry standard builder and quality guarantee. CW-6100 has 4.2KW cooling capacity, ±0.5℃ stability...

Viernes 27 octubre 2017

Cantidad : 1000

S&A water chiller CW-6000 with 3KW cooling capacity and environmental refrigerant CW-6000 chillers are producing by S&A company. S&A water chiller CW-6000 has 3000W cooling capacity with ±0.5℃ stability, water filter installed and r410a refrigerant loaded. S&A has...

Viernes 27 octubre 2017

Cantidad : 1000

S&A CW-3000,CW-5000,CW-5200 chiller stock in USA and Europe CW-3000,CW-5000 and CW-5200 chiller is produced by S&A company . S&A CW-3000 series thermolysis type water cooler has compact design, with energy saving, high cost performance, good protection and alarm system...

Viernes 27 octubre 2017

Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional equip-ment...

Viernes 27 octubre 2017

Fiber impurity Tester is a special instrument for measuring the impurity content of fiber. It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, impurities and Dust content. Country of Origin: United States Standards compliant...

Viernes 27 octubre 2017

Sublimation Fastness Tester is suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test...

Viernes 27 octubre 2017

Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and wet rubbing. Under certain conditions, the sample is rubbed against the standard small white cloth. Assess the degree of...

Viernes 27 octubre 2017

Insulation and wind pressure tester For external wall using advanced automatic control system, can display the recording process control curve for the external wall insulation system to test the wind pressure performance Standards compliant: Technical specification for external wall...

Viernes 27 octubre 2017

Physical performance tester for Building windows and doors Mainly used to detect the construction of the window of the wind pressure, air tightness and watertight performance, applicable to tertiary institutions, scientific research units, manufacturers, the use of units and related...

Viernes 27 octubre 2017

Introduction: The high temperature oxygen index tester is designed and de-veloped according to ISO4589-3 (Elevated-temperature test) and British Naval Engi-neering Standard NES 715. Based on the general intelligent oxygen index instrument,the high temperature oxygen index tester...

Viernes 27 octubre 2017

Introduction: Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional...

Viernes 27 octubre 2017

Fast thermal conductivity tester-Mainly used for the determination of non-metallic solid material thermal conductivity, suitable for testing units, universities, research and production units to use. Standards compliant: GB 10297-1998, GB / T10294-2008, GB / T10801.1, GB / T10801...