Insulation And Wind Pressure Tester For External Wall
Insulation and wind pressure tester For external wall using advanced automatic control system, can display the recording process control curve for the external wall insulation system to test the wind pressure performance
Standards compliant:
Technical specification for external wall insulation works JGJ 144-2004
JO 149-2003 Expanded Polystyrene Board Plastering Exterior Wall External Insulation System
JG / T 158-2013 powder polystyrene particles external wall insulation materials
Insulation And Wind Pressure Tester For External Wall Main Features:
1. High automation design: the use of PLC technology, in a sample test process, without manual participation in the operation, long-term continuous automatic operation.
2. High energy efficiency, low operating cost design: As the device in the test process required power and long-term continuous operation, so reduce operating costs must be considered. The static pressure box of the device is strictly sealed, the fan is adjusted by the inverter, and the running cost of the test is minimized.
3. High reliability design and failure - security technology design: control system using the upper and lower machine system, hardware redundancy, automatic switching, the system has a high reliability, to ensure the safety of the test.
4. Non-contact detection design, the device can be equipped with a color camera, the pilot on the console, you can observe the surface through the color display changes to achieve non-contact detection.
5. Wide range of adaptations, simple operation, stable performance, high control precision, accurate data acquisition and low comprehensive noise.
wind pressure detection device for External wall insulation system performance parameters Main parameters:
1. Wind pressure control range: -7000Pa ~ 0Pa;
2. Wind pressure test accuracy: 0.5%;
Pipe diameter: 8;
4. Wind pressure control accuracy: ≤ control target pressure ± 5%;
5. The number of cycles: can be arbitrarily set, frequency control accuracy of 100%;
6. Pressure pulse process time control deviation: boost 0.7 ~ 1.0s, sustained 2 ~ 3s, buck: ≥ 4s;
7. Power supply requirements: AC380V, 23kW three-phase five-wire power supply; AC220V, 2kW single-phase three-wire lighting;
8. With the maximum negative load design value W any set, the default method of pressurization process for the standard method, but also artificial custom pressure process procedures to expand the requirements.
Persona a contactar : Sun Qin, +86 21 6780 0179
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Insulation And Wind Pressure Tester For External Wall Buscar en la categoria : Bienes de equipo Buscar en la categoria : pressure, insulation, tester, external, wind, wall |
Martes 07 mayo 2024
Cantidad : 1500000 to - Precio : 88 USD
Hola, Estoy presente solicito una asociación con usted. De hecho , en representación de una empresa tunecina que trabajamos ofrecemos el cemento de alta calidad y probado a 88USD por tonelada . Una vez que el contrato para el comando que va a ir bien que le pedirá una garantía bancaria...
groupe horizon
- 843 - abidjan
- +22 5 22 47 11 71
- +225 04619689/49875663
Martes 07 mayo 2024
Cantidad : 80000 Ream - Precio : $0.79/Ream for 8000
ESPECIFICACIONES - Tamaño de hoja: 210mm x 297mm / 297mm x 420mm Normas Internacionales de papel Tamaño (ISO) A4 / A3 - Calidad: Importado 100% pulpa de madera virgen - Blancura: 102-104%, blanco natural - Clasificación: A - Espesor: 106cm - Capacidad: High Speed Copiado 100 ppm...
NATH LAOH LTD
- 50100 - Chiang Mai
- +66 9 95 35 59 56
Jueves 05 junio 2014
Sécurité incendie - La malveillance Formations – portes coupe-feu – b.a.e.s – désenfumage – plans. Commercialisation – installation – et maintenance des extincteurs.Achat extincteur casablanca service alarme intrusion, vidéosurveillance, Control d´accès,installation, la maintenance...
Casa Fire Sarl
- casafiresarl
- 20100 - Casablanca
- +212 (0) 522 271 032