RESISTANCE - 14607 Anuncios

Thursday 09 June 2022

HVD-FP-A fully automatic filter press is composed of a filter plate or filter frame. The filter plate and the filter frame form a set of filter chambers in the middle of press filter machine. The surface of the filter plate is grooved and the protruding part is used to support the filter cloth...

Thursday 09 June 2022

Horizontal Crystallizer HVD-HCR-V horizontal agitated batch vacuum crystallizer is a piece of cooling crystallisation equipment. The source medium of crystallization is operated under atmospheric pressure. The crystallization temperature is determined by the process and the crystallization...

Wednesday 08 June 2022

Cantidad : 10 contai - Precio : 0.05-20 USD/pc

Advantages of ss pipe nipple While similar to carbon steel in makeup, stainless steel is defined by having more chromium content. Compared to standard steel, stainless steel pipe nipples are more resistant to rust, corrosior, and stains. The exact amount of resistance to corrosion...

Wednesday 08 June 2022

Cantidad : 10 contai - Precio : 0.05-20 USD/pc

Advantages of Stainless Steel Pipe Nipples 316 While similar to carbon steel in makeup, stainless steel is defined by having more chromium content. Compared to standard steel, stainless steel pipe nipples are more resistant to rust, corrosior, and stains. The exact amount of resistance...

Wednesday 08 June 2022

SMC, BMC thermosetting plastic products are produced by SMC and plastic smc molding process. Types of BMC/SMC Molded Products BMC SMC Motor SMC/BMC plastic edging motor change the traditional material of iron and aluminum to reduces the process but seals more. High-Voltage Electrical...

Wednesday 08 June 2022

The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better properties of SMC material...

Wednesday 08 June 2022

BMC/SMC Motor Description BMC plastic edging motor replaces traditional iron and aluminum, reduces the process, seals more, and has higher safety factor. It mainly refers to white goods and public motors. High insulation, chemical resistance, high fire resistance, good water resistance...

Wednesday 08 June 2022

Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (automotive smc) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. • Stable shape...

Tuesday 07 June 2022

Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2t vehicle run over pressure. Electrical Performance The rated current: 16A、32A The rated voltage: 250V Insulation resistance: >1000MΩ(DC500V) Pins temperature rise: ...

Tuesday 07 June 2022

Connection Mode Riveting Pressure mode Screw mode Mechanical Properties Mechanical life: no-load plug>10000 Insertion force: <100N</span> Electrical Performance The rated current: 16A,32A The rated voltage: 250V,440V Insulation resistance: >1000MΩ(DC500V) Pins temperature rise...

Tuesday 07 June 2022

Mechanical Properties Mechanical life: no-load plug>10000times Impact of external force: be able to afford 1m drop and 2tons vehicle run over pressure Insertion and extraction force: <100N</span> Electrical Performance Rated current: 16A/20A/32A Rated voltage: 120V/250V...

Tuesday 07 June 2022

Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2t vehicle run over pressure. Electrical Performance The rated current: 16A、32A The rated voltage: 250V Insulation resistance: >1000MΩ(DC500V) Pins temperature rise: ...

Tuesday 07 June 2022

Precio : 1-10usd

Lithium Primary Batteries for Security HCB batteries' structure design high reliability, low internal resistance, designed for 10 years of smoke detectors, It also can be used in video surveillance, anti-theft, access control system and etc. With the development of information technologies...

Thursday 02 June 2022

Cantidad : 10000 - Precio : 190USD

The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution)...

Wednesday 01 June 2022

Picatinny Rail Weaver Scope Rings Adapter Rifle Scope Aluminum alloy has been widely used in the optical precision instrument manufacturing industry for its light weight, high specific strength, corrosion resistance and good low temperature resistance. AR15 Aluminum Buffer Standard...

Wednesday 01 June 2022

M6 solar cell MBB P-type double-sided half has high precision, high flatness screen printing, higher welding ability. After parallel resistance test, effectively reducing of heat spot effect, sorting into 15 grades according to each piece, accuracy up to 0.1%±. M6 solar cell through...

Wednesday 01 June 2022

G1 solar cell size plays an important role in the first unified standard size of monocrystalline in the module. G1 solar cell size is 158.75mm, which has the advantages of lower production costs, higher power, and higher acceptance of the cell side on the premise of specsquare monocrystalline...

Tuesday 31 May 2022

Stainless steel liner environmental protection and safety: stainless coffee pot uses food-grade SUS304 stainless steel material which can directly contact with the human body. This stainless steel vacuum jug is healthy and safe to use. One-key water pouring function is safe and easy to open...

Tuesday 31 May 2022

Plastic lipstick case is a container for Lip stick, lip blam, sticks. Normally, it's combined by 3 parts - cap, body, and holder. And the holder including cup, inner body, spiral, A-shell. Products Description The material for lipstick case can be plastic, aluminum or Zamac for luxury packaging...

Tuesday 31 May 2022

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic material can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Saturday 28 May 2022

Cantidad : 100

Haute solidité et resistance Basse densité: le modèle est + leger Compatible avec les imprimantes 3D Matériau : ABS, diamètre 3 mm Poids : 1 kg/bobine (2,2 lb) Longueur : env. 140 m Densité à 21,5°C : 1,01 g/cm3 Indice de débit de fusion à 10min, 2.16kg: 5 Point de fusion: 225 - 240...

Saturday 28 May 2022

Cantidad : 100

Haute résistance, bonne ténacité Faible densité: lors de l'impression d'un plus grand volume - le modèle est plus léger Peut être appliqué à une variété d'imprimantes 3D Matériau : ABS, 1,75 mm de diamètre Poids : 1 kg/bobine (2,2 lb) Longueur : env. 400 m Densité à 21,5 °C : 1,01...

Saturday 28 May 2022

Cantidad : 100

La rondeur de haute précision permet une meilleure qualité d'impression Pas de bulles, couleurs vives Peut être appliqué à une variété d'imprimantes 3D Matériau : PLA, 1,75 mm de diamètre, remplissage métallique Poids : 1 kg/bobine (2,2 lb) Longueur : env. 330 m Longueur : env. 120...

Saturday 28 May 2022

Cantidad : 100

Haute résistance, bonne ténacité Faible densité: lors de l'impression d'un plus grand volume - le modèle est plus léger Peut être appliqué à une variété d'imprimantes 3D Matériel : ABS, diamètre 3 mm Poids : 1 kg/bobine (2,2 lb) Longueur: env. 140 m Densité à 21,5°C : 1,01 g/cm3 Indice...

Saturday 28 May 2022

Cantidad : 100

Haute solidité et resistance Basse densité: le modèle est + leger Compatible avec les imprimantes 3D Matériau : ABS, 1,75 mm de diamètre Poids : 0,6 kg / bobine Densité à 215°C : 1,05 g/cm3 Indice de débit de fusion à g / 10min, 220 ° C / 5 kg: 1.8 Point de fusion : 210 - 250 °C Chaleur...

Saturday 28 May 2022

Cantidad : 100

Filament HIPS Maintient la résistance dans les applications à fort impact Facilement moulable, bonne stabilité dimensionnelle et faible volatilité Convient pour une utilisation dans une variété d'imprimantes 3D Peut être facilement collé et peint Matériau : HIPS, 1,75 mm de diamètre Poids ...

Saturday 28 May 2022

Cantidad : 100

La rondeur de haute précision permet une meilleure qualité d'impression Pas de bulles, couleurs vives Peut être appliqué à une variété d'imprimantes 3D Matériau : PLA, 3 mm de diamètre Poids : 1 kg/bobine (2,2 lb) Longueur: env. 120 m Densité à 21,5°C : 1,25 g/cm3 Indice de débit...

Saturday 28 May 2022

Cantidad : 100

La rondeur de haute précision permet une meilleure qualité d'impression Pas de bulles, couleurs vives Peut être appliqué à une variété d'imprimantes 3D Matériau : PLA, diamètre de 3 mm Poids : 1 kg/bobine (2.2 lbs) Longueur : environ 120 m Densité à 21.5°C : 1.25 g/cm3 Indice de fluidité à 10min...

Saturday 28 May 2022

Cantidad : 100

La rondeur de haute précision permet une meilleure qualité d'impression Pas de bulles, couleurs vives Peut être appliqué à une variété d'imprimantes 3D Matériau : PLA, 1,75 mm de diamètre Poids : 1 kg/bobine (2,2 lb) Longueur : env. 330 m Densité à 21,5 °C : 1,25 g/cm3 Indice de débit...

Saturday 28 May 2022

Cantidad : 100

La rondeur de haute précision permet une meilleure qualité d'impression Pas de bulles, couleurs vives Peut être appliqué à une variété d'imprimantes 3D Matériau : PLA, 3 mm de diamètre Poids : 1 kg/bobine (2,2 lb) Longueur : env. 120 m Densité à 21,5°C : 1,25 g/cm3 Indice de débit...