Silicone Rubber Shield for Porcelain Insulators
Cantidad : 1-200 Ton
Silicone Rubber Shield for Porcelain Insulators can used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap and pin type suspension insulator) from bird damage, lightning attack, etc.
Features of High Voltage Booster Shed
1. Shed booster can be used on 30kV~500kV switchgear, disconnector, post insulator, surge arrester and transformer insulation for increasing leakage path and enhancing pollution resistance.
2. The silicon rubber shed booster can be widely applied on any station porcelain insulation.
3. The shed number, shape and location shall determine in consideration with site pollution severity for optimized effect.
4. They can be adhered on large surface to increase adhesion reliability.
Apart from increasing the flashover performance of insulators, silicone rubber shield for porcelain insulators is perfect for reducing the surface electrical stress and leakage current and increasing the electric strength of the insulators.
Product Features of Busbar Insulation Coating:
1. Made of special organic silicone rubber and other polymer and high performance.
2. Safe of electric equipment so important for power system.
3. Breakdown of electric equipment will bring huge loss to power system and entire national production.
4. Our silicone rubber insulation coating protects power system from breakdown like bombing.
5. Applied to equipment or elements need insulating handling, heat-conduction, flame resistant and moisture-proof protection like bare wire, naked bus, electric cable, wall crossing pipeline in high-low pressure substation and distribution system, HP motor, dry reactor, dry transformer and switch cabinet.
6. Especially suitable for electric equipment working in dirt and humid environment.
7. Excellent insulating property: Breakdown field strength of coating is over 20kv/mm.
8. Can effectively stop general short trouble caused by small animal in transformer substation and person injury accident because of nude electric.
9. Non-flammable, self-extinguishing, nice flame retardant with FV-0 class.
10. Excellent heat-conducting: Heat conductivity 0.202W/ (m. K) 10 times of air, so it can release equipment's heat in time to prevent excess temperature.
11. High strength, strong adhesion and high corrosion tolerate.
12. Ozone, UV and environment aging-resistant.
13. Not be easy break down by ozone and UV radiation.
14. Service Life is at least 20 years in nature environment.
Item |
Silicone Rubber Insulation Coating |
Heat Shrink Tube |
Electrical Insulation |
Excellent electrical insulation. Breakdown Voltage is more than 25 kV/mm. |
Common performance. |
Cover Effect |
Excellent adhesion. |
Common cover effect especially in the connection part. |
Thermal Conductivity |
The coating has closely attached to the conductor and has good thermal conductivity could better release the heat of equipment. Its thermal conductivity is 0.2W/ (m. k), which is ten times then air. |
Relatively poor due to there is air gap between the tube and equipment. |
Flame Retardant |
Hard to burn and has good fire retarding ability up to FV-0 Class. |
Easy to deform, crack and broke. |
Application |
Favorable hardness makes its construction time is short. (less than one working day) |
Long construction time and need to disassemble the equipment. |
Maintenance |
Easy to maintain and repair. The coating will not affect the dismounting of screw or bolt. Moreover, if recoating, the new coating can have integrated fuse with the old coating tightly. |
Although it's also convenient to maintain and repair, but the connection place is easy to peel and broke. |
Ageing Resistance |
Good hydrophobicity and resistance to ageing, dampness, ozone, radiation, UV, etc. make it free of maintenance and can serve for a long time. Its service life could be more than 20 years. |
Poor ageing resistance, its service time is about 5 years or even less especially in some bad environment the cracking and break phenomenon will happen. |
Economic |
Excellent performance at reasonable cost. |
Lower cost. |
Ruisen as one of the most professional silicone coating suppliers, we provide composite polymer insulator, silicone composite insulators, rtv silicone coating and etc. Want to know more? Please contact us.
Persona a contactar : Zang Iven, 0597 3271526
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de Silicone Rubber Shield for Porcelain Insulators Buscar en la categoria : Varios / Descuento Buscar en la categoria : shield, porcelain, insulators, rubber, silicone |
Sábado 06 abril 2013
Liquidación de zapatos-ropa-equipos en grandes cantidades de vacaciones cerca de las grandes empresas de venta européennes.ACHAT grandes lotes Rutinariamente preguntar sobre las llegadas. ACTUALMENTE: 80000 discos de corte realizadas en todos los tamaños-europe-off Precio 0...
sarl destockage.com
- leveque11
- - LE MANS
- 07 63 12 72 72
Martes 17 mayo 2016
Somos una usina moderna de congelacion de pescado que es certificada HACCP (ISO 9001 en camino). Apartenemos a un grupo que posee mas de 20 barcos de pesca con una cadena logistica integrada y una usina de hielo. Tenemos CONSTANTE y REGULAR suministro de pescado con la prioridad...
KOMOFISH
- 70040 - Laayoune
- 00212661964456
Miércoles 14 septiembre 2016
Cantidad : 5000 - Precio : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935