TESTER - 1259 Anuncios

Viernes 27 octubre 2017

Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional equip-ment...

Viernes 27 octubre 2017

Fiber impurity Tester is a special instrument for measuring the impurity content of fiber. It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, impurities and Dust content. Country of Origin: United States Standards compliant...

Viernes 27 octubre 2017

Sublimation Fastness Tester is suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test...

Viernes 27 octubre 2017

Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and wet rubbing. Under certain conditions, the sample is rubbed against the standard small white cloth. Assess the degree of...

Viernes 27 octubre 2017

Insulation and wind pressure tester For external wall using advanced automatic control system, can display the recording process control curve for the external wall insulation system to test the wind pressure performance Standards compliant: Technical specification for external wall...

Viernes 27 octubre 2017

Physical performance tester for Building windows and doors Mainly used to detect the construction of the window of the wind pressure, air tightness and watertight performance, applicable to tertiary institutions, scientific research units, manufacturers, the use of units and related...

Viernes 27 octubre 2017

Introduction: The high temperature oxygen index tester is designed and de-veloped according to ISO4589-3 (Elevated-temperature test) and British Naval Engi-neering Standard NES 715. Based on the general intelligent oxygen index instrument,the high temperature oxygen index tester...

Viernes 27 octubre 2017

Introduction: Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional...

Viernes 27 octubre 2017

Fast thermal conductivity tester-Mainly used for the determination of non-metallic solid material thermal conductivity, suitable for testing units, universities, research and production units to use. Standards compliant: GB 10297-1998, GB / T10294-2008, GB / T10801.1, GB / T10801...

Viernes 27 octubre 2017

Plate thermal conductivity tester is used to test the thermal conductivity of refractory insulation, ceramic fiber, felt, textile, plate, brick and other materials at different temperatures. Plate thermal conductivity tester Standards compliant: GB / T 17911-2006 "Test method for...

Viernes 27 octubre 2017

Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and polymers and other building materials, the determination of calorific value of fuels, used in building research and technical supervision...

Viernes 27 octubre 2017

According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products. Applicable to category B, C, D, E, Bfl, Cfl, Dfl and...

Viernes 27 octubre 2017

According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products. Applicable to category B, C, D, E, Bfl, Cfl, Dfl and...

Viernes 27 octubre 2017

Rubber wheel abrasive wear tester-According to ASTM G65-04 standard, under certain test conditions, the use of sliding friction in the form of engineering plastics, powder metallurgy, alloy bearings and other performance. main feature: 1. consists of two parts: host and control system; 2...

Viernes 27 octubre 2017

Taber oscillation and wear instrument is used to test the transparency of materials and coatings on glass, lenses, and to evaluate the abrasion resistance of organic coatings, plastics, metals and other materials. Standards compliant: ASTM F735, ARCA AR-C STP 5.2.5 (Bayer Wear Test)...

Viernes 27 octubre 2017

Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment. Standards compliant: GB / T 8627, ASTM D2843 The main purpose: Mainly...

Viernes 27 octubre 2017

Universal pilling pilling viewer/Verivide Pilling Pilling Rating tester By comparing the sample to the standard card under the specified light source to obtain the rating results, apply to all the pilling test. Technical Parameters: 1, size length x width x height (L x W x H): 240mm...

Viernes 27 octubre 2017

Fabric thickness tester mainly used to measure the thickness of the fabric, suitable for leather, rubber and textiles and other materials, the thickness of the measurement, to detect the standard situation. Standards compliant: ISO 1765: 1986, ISO 1766: 1999 (BS), BS 4051: 1987 (1996), BS 4098...

Viernes 27 octubre 2017

Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage Meet the standard: GB / T6505-1986; FZ / T-T50004-1991 Instrument features: The instrument...

Martes 17 octubre 2017

Application: Fabric surface waterproof performance tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the of water through fabric...

Martes 17 octubre 2017

Fabric anti-drilling velvet tester Mainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a variety of fabrics to prevent drilling or feathers from the joints between the drilling performance. Meet the standard: GB / T 12705 The main parameters...

Martes 17 octubre 2017

Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and...

Martes 17 octubre 2017

The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical...

Martes 17 octubre 2017

Absorbent properties tester can be used for medical, sanitary nonwovens water absorption and water absorption of the determination of the instrument kits to meet a variety of different standards. Standards compliant: Edana 10.3-99, ISO 9073-6, IST 10.1 (95) Scope of application...

Martes 17 octubre 2017

Fabric anti-electromagnetic radiation performance tester is mainly used for textile, plastic sheet, sheet metal, non-conductive material surface coating or coating, metal mesh, conductive film, conductive glass, conductive medium plate electromagnetic shielding materials such as...

Martes 17 octubre 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Martes 17 octubre 2017

Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge. Standards compliant: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009...

Martes 17 octubre 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Martes 17 octubre 2017

Smoke Density Tester for Building Materials Smoke Density Tester for Building Materials main purpose: Building smoke density tester, plastic smoke density tester is with built-in burning lamp, and by the smoke box into a 45 ° angle, for the determination of building materials, solid...

Martes 17 octubre 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...