​HEAT - 11692 Anuncios

Miércoles 18 octubre 2017

Specification. Pressure Rating: 1.6-16.0Mpa Specification: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Structural characteristics: 1.Automatic blowoff mechanism is installed inside the valve. It is a new-type crown valve plate with reliable sealing,and steam...

Miércoles 18 octubre 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Miércoles 18 octubre 2017

Brief Introduction. TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design. Structural Characteristic. 1.Assembled with steam or air heat preservation...

Miércoles 18 octubre 2017

We are renowned manufacturers of well designed and highly efficient Double Port Safety Valves. Demanded by modern plants, our safety valves are capable of dealing with the pressure and temperature normally encountered in the steam process and compressed air. Our range of Double Port...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

DIN Standard Safety Valve Features: Safety valves were first used on steam boilers during the industrial revolution. Early boilers without them were prone to accidental Explosion. Safety valves also evolved to protect equipment such as pressure vessel (fired or not) and heat exchangers...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve mainly composed of valve body, valve seat and valve flap. It adopts the structure of double valve seat and double cone valve flap. It adopts pressure balancing valve flap. Realize remote control and auto control through valve flap elevation...

Miércoles 18 octubre 2017

CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Miércoles 18 octubre 2017

Precio : Negotiable

C5235E Double-column Vertical Lathes 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Miércoles 18 octubre 2017

C5231E Double-column Vertical Lathes china 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Miércoles 18 octubre 2017

C5228E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Miércoles 18 octubre 2017

Cantidad : 9999999999

C5225E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Martes 17 octubre 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Martes 17 octubre 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Sábado 14 octubre 2017

Cantidad : Min order - Precio : 1-5USD/pc

Keywords: ASTM A105N Flange,ASME B16.5 WN Flange Name: WN Flange. Class: CL600. Schedule: SCH 80. Material: ASTM A105N. Ends: RF. Standard: ASME B16.5. Size: 12". ASTM A105N Flange Chemical Composition: Grade C Mn P S Si Cu Ni Cr Mo V A105 - 0.60 - - 0.10 - - - 0...

Sábado 14 octubre 2017

Cantidad : 30 - Precio : 500 000,00 €

1.Electric Type This tunnel oven is composed of oven tunnel, mesh belt , belt driving system, chimney, electric heating and control cabinet. The heater adopts infrared heating to make the biscuit baking equally. Frequency inverts control cabinet makes more accurate temperature controlling...

Sábado 14 octubre 2017

Cantidad : MOQ 10 TON - Precio : USD 200-400 PER TON

Name: Ammonium Chloride(treated) Products code: 135005001 CAS No.: 12125-02-9 Formula: NH4Cl Shelf life: 2 years Packing: In 25kg net polywoven bag with PE bag liner, 20mt with pallets and 22mt without pallets in each 20'FCL. Usage: Mainly used in industry of dry cell, electroplating...

Martes 10 octubre 2017

Cantidad : 50000 - Precio : US$20-50/pieces

- Quick Details - - Place of Origin: Guangdong, China (Mainland) - Brand Name: XC - Model Number: XC-3KTM-221 - Application: RC Model copters ,Drone - Shape: carbon fiber strip - Dimensions: customized request - Product Type: Carbon Fiber - C Content (%): 100% - Working Temperature...

Martes 10 octubre 2017

Cantidad : 50000 - Precio : US$8-30/pieces

- Quick Details - - Place of Origin: Guangdong, China (Mainland) - Brand Name: XC - Model Number: XC-3KTM-25 - Application: RC Model copters ,Drone - Shape: Carbon Fiber Tube - Dimensions: 25mm 22mm 20mm 15mm 10mm OD - Product Type: Carbon Fiber - C Content (%): 100% - Working...

Martes 10 octubre 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Martes 10 octubre 2017

Heat Resistance Contact Tester Product Details: Heat Resistance Contact Tester is mainly used to test fire clothes, thermal protective gloves, or similar thermal protection material against thermal heat contact heat capacity. The contact time between the temperature of the material...

Martes 10 octubre 2017

Fabric thermal protection radiation performance tester Standards: ISO 6942 Product description: Thermal protection performance tester used for the determination heat radiation performance of the single or multi-layer fabric in high temperature environment. The heat radiation performance...

Sábado 30 septiembre 2017

Product Description Introdution<! -- span--> Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature...

Viernes 29 septiembre 2017

Cantidad : 30sets - Precio : 500 000,00 €

This is a SUS201 stainless steel mixer to prepare the cream for the production. It consists of a beater- type mixing unit. It is driven by one 4.5 Kw motor and the turnover system that removes the cream from the mixer is driven by one 0.55Kw motor. The mixing time is depending on...

Jueves 28 septiembre 2017

Delivery of antifreeze liquid in cooling system silicone hoses APPLICATION: PLUTAE is recommended for suction and delivery of antifreeze liquid in the wind turbine cooling system where require a certain degree of flexibility and a long service life. Silicone tubing Construction: Tube...

Martes 26 septiembre 2017

Precio : USD 4.5/Square Meter

Product Description: Key Specifications/Special Features: Product Name: Hot Sale Stinless Steel Woven Wire Mesh For Filter Material: stainless steel wire 304/316 Color: stainless steel colour Standard；JB/T5979-92,Q/9D193-1998,ISO478 3/1--1990 Grade : As request Used: Used for gas...