Easy operation and good efficiency working rate vertical warm & hot forging machine for...

Introdution <! -- span-->

Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature at which it is performed: cold forging (a type of cold working), warm forging, or hot forging (a type of hot working). For the latter two, the metal is heated, usually in a forge. Forged parts can range in weight from less than a kilogram to hundreds of metric tons. Forging has been done by smiths for millennia; the traditional products were kitchenware, hardware, hand tools, edged weapons, and jewellery. Since the Industrial Revolution, forged parts are widely used in mechanisms and machines wherever a component requires high strength; such forgings usually require further processing (such as machining) to achieve a finished part. Today, forging is a major worldwide industry.

Advantage <! -- span-->

Forging can produce a piece that is stronger than an equivalent cast or machined part. As the metal is shaped during the forging process, its internal grain deforms to follow the general shape of the part. As a result, the grain is continuous throughout the part, giving rise to a piece with improved strength characteristics. Additionally, forgings can target a lower total cost when compared to a casting or fabrication. When you consider all the costs that are involved in a product's lifecycle from procurement to lead time to rework, then factor in the costs of scrap, downtime and further quality issues, the long-term benefits of forgings can outweigh the short-term cost-savings that castings or fabrications might offer. <! -- p-->

Some metals may be forged cold, but iron and steel are almost always hot forged. Hot forging prevents the work hardening that would result from cold forging, which would increase the difficulty of performing secondary machining operations on the piece. Also, while work hardening may be desirable in some circumstances, other methods of hardening the piece, such as heat treating, are generally more economical and more controllable. Alloys that are amenable to precipitation hardening, such as most aluminium alloys and titanium, can be hot forged, followed by hardening.

Main Features< /h3>

1) It has strong anti-bias load capacity, to meet the general multistation forging process.< /p> 2) X-type rail slider with heat distortion, and high accuracy.
3) Brakes are cooled to meet the requirements of high-speed forging.
4) Larger nominal power stroke, for warm forging and extrusion-type parts of forging.
5) Combat energy, to meet the general requirements of the enterprise selection.
6) With the upper and lower ejector device
7) Strike fast, long-life die.
8) With a boring car lifting device, easy to operate.
9) Loaded with large die height adjustment, increasing the scope of the mold.
10) Thin-oil lubrication guide,to make the machine more environmentally for the work environment.