INJECTED - 314 Anuncios

Jueves 07 septiembre 2023

Cantidad : 5000 - Precio : 0-100

Machinery engine parts are the basic components of machinery, which are the indivisible parts of machinery and machine. As a key part of the machinery, the quality of mechanical parts plays a very important role in the normal operation of machinery, so it is very important to choose...

Miércoles 06 septiembre 2023

Casing head is a kind of new product which is designed according to customers' requirements and applied in all deep wells and completion operation. lt is mainly used to fix wellhead connect casing string and seal, and control the pressure of casing annular space. The casing head assembly...

Miércoles 30 agosto 2023

GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Jueves 24 agosto 2023

Cantidad : 1000t/m - Precio : 25kg/bag

ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of polybutadiene....

Jueves 24 agosto 2023

GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, washing machines, air conditioners, and various smart home appliances). We can provide turnkey solutions for high-precision houseware moulds according to customers' ideas, from raw material...

Miércoles 23 agosto 2023

Soft Rubber rapid prototype, Hardness is generally between shore A 30~90 degrees, because soft rubber plastic prototype has flexibility, it is widely used in the rapid prototype industry. The processing method of soft plastic rapid prototype is relatively single, and it can only be...

Miércoles 23 agosto 2023

Welinktech Hypodermic Needle Molds are specifically designed to produce needles for syringes that are used for various medical applications. These molds come in different shapes and sizes, ensuring precision and accuracy in the manufacturing process to guarantee that the needles...

Miércoles 23 agosto 2023

A connector mold, also known as a connector tooling, is a type of injection mold that is specifically designed to produce connectors or cable assembly components. Connectors are widely used in different industries, such as telecommunications, automotive, consumer electronics, and many others...

Martes 08 agosto 2023

Precio : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Martes 08 agosto 2023

Cantidad : 1K - Precio : 1-1000000usd

Liquid silicone rubber (LSR) molding is a form of injection molding. The liquid silicone rubber is first injected into the mold, then the liquid is thermally cured, cooled and removed from the mold. Compression molding uses uncured rubber that has been preformed into a controlled shape...

Miércoles 02 agosto 2023

Precio : 100000-500000USD

Girder Carrier carrying capacities of 120T, 160T, 180T, 220T, 250T, and 300T that can be used directly to feed girder to bridge launcher and coordinate cross hole of bridge crane, featuring self-propelled, concrete girder without limitation of length, user- friendly operation, and maintenance...

Sábado 29 julio 2023

silicone moulding process The silicone dousing unit starts in two parts Composed A and composed B pumps one Part A silicone and one Part B silicone via separate hoses to the static mixer. Cylinder A contains the basic material. while cylinder B contains a catalyst. In addition, color...

Sábado 29 julio 2023

Making the prototype plastic molding parts by injection machine For prototype mold, the prototype plastic parts also need to be molded by a plastic injection machine. The mold will be placed into the injection molding machine and then injected with the plastic prototype material....

Sábado 29 julio 2023

Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 sets of injection machines, with 9 NISSEI and 14 LSR machines housed in a class 8 clean room to ensure the highest level of cleanliness and quality...

Miércoles 26 julio 2023

Overmolding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product...

Miércoles 26 julio 2023

Insert Moulding Design USM molds focus on structural parts injection molds, gas-assisted and water-assisted injection mold, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product...

Miércoles 26 julio 2023

Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas assist molding; The product wall thickness of water-assisted...

Sábado 22 julio 2023

Angiographic injector is used in conjuction with angiographic syringes in clinical departments such as the imaging department (CT MR), and catheter laboratory (DSA). Equipped with state-of-the-art technology, SCW Medicath angiographic injectors enable accurate control of contrast agent flow...

Sábado 22 julio 2023

Cantidad : 30 sets of - Precio : $1,000-$10,000

2k Injection Molding Factory 2k injection moulding is a manufacturing process that refers to molding two materials or colors into one plastic part. This technology combines two materials or two colors into one ending plastic part by using a 2K automotive custom plastic injection...

Sábado 22 julio 2023

Cantidad : 30 sets of - Precio : $1,000-$10,000

Electronics Product Part With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many...

Sábado 22 julio 2023

Cantidad : 30 sets of - Precio : $1,000-$10,000

2k Injection Molding Factory 2k injection moulding is a manufacturing process that refers to molding two materials or colors into one plastic part. This technology combines two materials or two colors into one ending plastic part by using a 2K automotive custom plastic injection...

Miércoles 05 julio 2023

Which Mold do you want to do? Plastic Injection/die casting or punch mold, etc. Which Mould Material do you want choice? 45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61, etc. Which does the Product Material want? PP, PC, PS, PE, PU, PVC, ABS, PMMA, etc. How many Cavities? Single/Multiple...

Miércoles 05 julio 2023

Kiddie bumper cars are a brand-new high-tech parent-child interactive bumper cars. This design of child bumper car injected new idea of sports competition spirit into the game which changed the original game modes. The game is more interesting. A special designed cambered chair makes...

Viernes 30 junio 2023

Water System for Pharmaceutical Use In the pharmaceutical industry, Biocell provides professional solutions for purified water system, water for injection system, pure steam system, storage and distribution system in terms of water demand for medical infusion, injection, freeze-dried...

Miércoles 28 junio 2023

Precio : 100USD

In the past 10 years, over-moulding technology has completely changed the aesthetic standards, design ideas and functional requirements of consumer goods. Medical device manufacturers also recognize the potential advantages of the technology and continue to expand its application...

Martes 27 junio 2023

Precio : $5-$200000

The fracturing tree (frac tree wellhead) is a piece of wellhead equipment used to direct and control oil & gas from the well. It is an assembly of valves, spools, and fittings used for an oil well, gas well, water injection well, water disposal well, gas injection well, condensate well...

Martes 20 junio 2023

Core and cavity are used in the injection molding process, where the concave part of the mold is the cavity and the convex part is the core. The core and cavity in injection molding are used in pairs, with the cavity also referred to as the female mold and the core as the male mold...

Martes 20 junio 2023

PRECISION PLASTIC INJECTION MOLDING Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Material for the part...

Miércoles 07 junio 2023

Cantidad : 1 ton

HSPC/HYDROGENATED SOY PHOSPHATIDYLCHOLINE CAS 92128 87 5 1. Trade name: HSPC; 2. Chemical name: HSPC/Hydrogenated soy phosphatidylcholine; 3. Molecular formula: C42H84NO8P; 4. Manufacturer: AVT (Shanghai) Pharmaceutical Technology Co., Ltd.; 5. CAS number: 92128 87 5; 6. EINECS number: 295-786-7...

Miércoles 31 mayo 2023

Girder Carrier carrying capacities of 120T, 160T, 180T, 220T, 250T, and 300T that can be used directly to feed girder to bridge launcher and coordinate cross hole of bridge crane, featuring self-propelled, concrete girder without limitation of length, user- friendly operation, and maintenance...