RATIO - 3511 Anuncios

Tuesday 31 January 2023

R&D-scale Ultrasonic Spray Pyrolysis System Spray pyrolysis system for fine powder preparation in R&D scale Ultrasonic atomization technology atomizes precursor into submicron droplets Ultrafine powder in nano scale with uniform size can be prepared Unique ultra-fine powder...

Tuesday 31 January 2023

Coating uniformity: > 95% Non-clogging ultrasonic nozzle technology reduces maintenance cost and down-time Continuous liquid delivery in 24 hours Utilization rate of raw materials is more than 85% XYZ three-axis servo motion system and motion controller to optimize spray patterns...

Monday 30 January 2023

Symmetrical mode: That is, the uplink and downlink rates are both 10G. The asymmetric mode can be considered as a transitional form of the symmetric mode. In the early stage where the upstream bandwidth demand is less and the cost is more sensitive, the asymmetric mode can be used...

Monday 30 January 2023

The asymmetric system only has a downlink rate of 10.3125 Gbit/s, while the uplink rate is still 1.25 Gbit/s. As the first mature next-generation PON technology, 10g epon technology is in line with network development trends. It has the advantages of large bandwidth, large optical...

Sunday 29 January 2023

Galvanizer machine is an integrated product of mechanical and electrical control. According to the process requirements, two main bodies and three stations combined roll coater machine can be configured to achieve rapid non-stop switching of continuous units, so as to meet the needs...

Sunday 29 January 2023

LFS series- this harmonic actuator is a combination product that is lightweight, ultra-flat. It uses cross-roller bearing. LFS integrated series-Combined strain wave reducer with high performance and small motor, with highest input characteristics under the same gear conditions. Applications...

Sunday 29 January 2023

Specification of LFF output flange gearbox Rated POarameter Table of LFF Series Planetary Reducer Gearbox Nominal output torque(Nm) 14-3150 Reduction ratio 4-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 58-79 Output flange and tapered roller bearings...

Sunday 29 January 2023

Specification of LFER right angle planetary gearbox Rated Parameter Table of LFER Series Planetary Reducer Gearbox Nominal output torque(Nm) 14-600 Reduction ratio 3-100 Backlash(arcmin) ≤8 Max.working temperature(℃) 90 Noise(dB) 63-74 A high-performance right-angle solution...

Sunday 29 January 2023

LFD Planetary Reduction Drive Specification of LFD Planetary Reduction Drive Rated Parameter Table of LFD Planetary Reducer Gearbox series Nominal output torque(Nm) 25-2550 Reduction ratio 3-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 60-77 LFD Tapered...

Sunday 29 January 2023

Specification of LFB Concentric Shaft Planetary Gearbox Reducer Rated parametertable of LFB series Concentric Shaft Industrial Planetary Gearbox Nominal output torque(Nm) 14-1900 Reduction ratio 3-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 63-77 ...

Sunday 29 January 2023

Laifual Harmonic drive (strain wave gear, harmonic gearbox, harmonic gear drive reducer) mainly consists of three parts. Which are wave generator, flex spline, cicular spline. Our harmonic drive has the characteristics of zero-backlash, low-temperature rise, low starting torque, high reliability...

Sunday 29 January 2023

HARMONIC GEARBOX SOLUTION EXPERT Naming Rules How does a Harmonic Drive Work? The rotation movement comes from the input shaft, which can be a servo motor shaft. This is connected to an element called "harmonic wave generator", which has an elliptical shape and is surrounded by an...

Saturday 21 January 2023

Cantidad : 300sets/mo - Precio : 7800-200000USD

During the production process of fresh cassava, the crushing section is very important for the quality of final products, the cassava crusher machine for starch processing can crush the washed cassava into the slurry with uniform size and separate the residues from the cassava slurry...

Saturday 21 January 2023

Precio : 500~2000usd/sqm

HD LED Display HD1.2 | HD1.5 | HD1.6 | HD1.9 | HD2.5 Front maintenance Front Installation Cabinet ratio 4: 3 High Grayscale High Refresh Light and Thin Full Front Maintenance LED modules, power supply, receiver card, hub card, cables are all front service. Front Installation Each...

Saturday 21 January 2023

Precio : 500~2000usd/sqm

LEDFUL Fine Pitch LED Display More Advantages and Features LEDFUL fine pitch LED display Pitch P1.0, P1.2, P1.4, P1.5, P1.56, P1.66, P1.92, P2, P2.5 are providing solutions for dispatching center, command center, broadcasting room and TV center, meeting room, stock exchange, press conference...

Saturday 21 January 2023

Dynamic Image Analysis Particle Size for Dry Measurement The BeVision D2 provides an efficient solution to the size and shape analysis of dry, high-flowability powders or granules. Tens of thousands of particles can be measured by a BeVision D2 within three minutes. Combining a high-speed...

Saturday 21 January 2023

Dynamic Imaging Particle Analysis Most particle size measurement techniques methods are based on the assumption of spherical shaped particles. This hypothesis leads to significant errors in the analysis if the particles are flake or rod-shaped. Especially for such highly form-anisotropic...

Saturday 21 January 2023

Precio : $30000~300000/set

Mixing Modification of Elastomer——Blending Modification of SBS/SEBS Applications of thermoplastic extrusion Elastomer: The English acronym of Thermoplastic Elastomer is TPE. In the Chinese market, TPE refers to SBS/SEBS blending modification materials. Because SBS/SEBS elastomer...

Saturday 21 January 2023

Precio : $30000~300000/set

Overview of SK53 Twin Screw Extruder SK53 small twin screw extruder is a mini extruder machine that can be used in engineering plastics, color masterbatch, functional masterbatch, blending modification, and other industries. In order to adapt to the high temperature and high wear...

Friday 20 January 2023

Cantidad : 10-1000 pc - Precio : USD9,000 - USD 18,00

GH-SW1280 InGaAs area image sensors are two-dimensional image sensors. The ingaas sensor has a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900-1700) and extended...

Friday 20 January 2023

Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel...

Friday 20 January 2023

Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance. And the steel fiber in bulk ensures the mixing fast and convenient, and the distribution homogeneous. During pulling from the cement...

Friday 20 January 2023

There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Friday 20 January 2023

KE600B series high-performance spindle servo drive built-in position loop and servo positioning function. When used in the machine, it can realize closed-loop control of the spindle motor which has the encoder with the fast response and smooth speed feature. KE600B could be widely...

Friday 20 January 2023

KE600A series is a closed loop vfd developed on the basic of KE300, with more powerful functions, fit for more complex applications. Integrated with close loop vector control, sensorless vector control, V/f control, torque control and soft start functions, KE600 closed loop vector...

Thursday 19 January 2023

High power direct 750w hub motor, wheel size 24in~29in, it provides a lot of power. Main parameter of DGW29-Rear Drive MTB Motor specification parameter Driving position Rear Wheel size 24in-29in Spoke 36holes 12G/13G Rated power 750W Rated voltage 36V~48V Max.torque 55N...

Thursday 19 January 2023

This motor is the most powerful in wheel electric motor one in our company, wheel size 20in~28in, rated power 750W~1000w. Main parameter of DGW25P-Rear Drive Motor-MTB specification parameter Driving position Rear Wheel size 20in-28in Spoke 36holes 12G Rated power 750W ...

Thursday 19 January 2023

Shengyi powerful DGW25E motor is strong enough to ride on rough mountain trail, which offers stable, smooth and continuous power to support 60NM max torque. Main parameter of DGW25E-Rear Drive Motor-MTB specification parameter Driving position Rear Wheel size 20in-28in Spoke...

Thursday 19 January 2023

This kind of motor is a small size brushless motor rear, the small electric hub motor is strong enough to ride on rough mountain, and the classification of waterproof is IPX5. Main parameter of DGW10R-Rear Drive Motor-City Bike specification parameter Driving position Rear Wheel...

Thursday 19 January 2023

Except for the different sizes of these motors, they are all high speed brushless wheel motors that provide high speed and rated power. Main parameter of DGW07-Motor R16 specification parameter Driving position Rear Wheel size 16in Rated power 250W Rated voltage 24V~36V~48V Max...