CASTINGS - 3334 Anuncios

Jueves 07 abril 2022

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by CNC grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china machining is combined...

Jueves 07 abril 2022

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...

Jueves 07 abril 2022

Casting is one of the basic processes of modern equipment manufacturing. The casting process can be divided into three basic steps, namely casting metal preparation, mold preparation, and casting processing. Casting metal refers to the metal material used for casting castings in...

Jueves 07 abril 2022

ETCN was established in September 2008. After years of accumulation and development, it has formed a comprehensive manufacturer with custom machining services as the mainstay, supplemented by stamping, forging, casting, and welding processes. As a machining manufacturing company,...

Martes 29 marzo 2022

The vacuum pressure casting, as this name indicates, is casting method which the major processes including the melting, pouring, solidifying are performed inside the vacuum chamber. The vacuum is able to minimum the gas content of the product, and prevent further oxidation happening to the metal...

Martes 29 marzo 2022

The stainless steel has much better physical properties then iron and normal steel, but it possesses worse casting properties. Because the stainless steel has higher melting temperature point, by the liquid form it has worse flowability and bigger shrinkage ratio, and more easier...

Martes 29 marzo 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Martes 29 marzo 2022

Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in white powder, non toxic and non-inflammable. It is suluble in water in various amount. A more common name for sodium silicate is water glass...

Martes 29 marzo 2022

The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand and several other materials. The silica sol is applied to both sand casting and investment casting technics. It is one of the most common...

Martes 29 marzo 2022

The name grey iron is because of the gray color of the fracture it forms, which is due to the presence of graphite. Grey iron die casting is the most common and widely used casting material. Grey iron is so popular in engineering applications because of its relatively low cost and...

Martes 29 marzo 2022

Vacuum investment casting is one of the precision investment casting methods. This special technic is mainly applying to producing the small but high requirements casting items such as aircraft parts, jewelry, and accessories. The term, vacuum investment casting, refers to the process...

Martes 29 marzo 2022

Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and applied over 30 years world wide. The main principle of this technic is to perform a strong stir during the metal phase change from liquid to solid...

Miércoles 23 marzo 2022

Shot peening machine is a process specifically designed to enhance the fatigue strength of components which are subject to high alternating stress. It can help to prevent fatigue cracks, corrosion, deteriorated strength and premature fatigue that can be caused by machining and form...

Miércoles 23 marzo 2022

- Rotary shot blasting machine Basic Specification - ITEM RT1000/900 RT1200/900 RT2000/1500 Maximum dimension of chamber (mm) Φ1350×560 Φ1350×860 Φ2654×560 Maximum workpiece weight (kg) 400 400 1000 Diameter of Turn Table(mm) Φ1200 Φ1200 Φ2500 Number of blast wheels...

Jueves 17 marzo 2022

Food Grade Liquid Silicone Rubber SiSiB® LR1100 series are paste-like, easily pigmentable two-component liquid silicone rubber for injection molding process. Technical Data Product LR1140 LR1150 LR1160 LR1170 Appearance Transparent Transparent Transparent Transparent Viscosity (Pa...)

Miércoles 16 marzo 2022

Precio : 10-30USD

A foot valve is composed of the valve body, valve cover, valve disc, sealing ring, and gasket, etc. A foot valve is a type of check valve that is typically installed at the bottom of Pump suction line, used to prevent water emptying from suction lines after shut down to prevent water...

Miércoles 16 marzo 2022

Cantidad : 500piece - Precio : 60-300$

Currently, communities have recreational or meeting places, one of those places are parks. For these cases, good lighting is required in these areas when night falls and also that these installations do not obstruct the vegetation and the ornament. The Sinowatcher led park lamps are...

Miércoles 16 marzo 2022

Precio : 100USD

Main parts for Gate valve consist of Valve Body, Bonnet, Disc, arm, shaft, guide and valve seat. Those parts of a gate valve, chain operated gate valve, or high pressure gate valve can be made either from gate valve casting or forgings. Available material by WALKSON, a reliable gate...

Miércoles 16 marzo 2022

Precio : 100USD

The unique, formable design of Chocky wear bars and wear button are available in various lengths, grades and sizes and can also be customized as per the client's specific need. Applications for Chocky Bars are wide and varied, ranging from specific wear protection on buckets for loaders...

Miércoles 16 marzo 2022

Precio : 100USD

Check Valve As a professional high pressure check valve part manufacturer, Walkson provides castings or forgings for adjustable cracking back check valve. Our best check valve components include Valve Body, Bonnet, Disc, arm, shaft, guide and valve seat. Why Choose WALKSON Check Valve...

Miércoles 16 marzo 2022

Precio : 100USD

Walkson, as a reputable a butterfly valve company, provides butterfly valve casting and forgings for different types of butterfly valves. The actuated butterfly valve components include Valve Body, stem, Disc and valve seat. Available material provided by WALKSON, a reliable big gate...

Miércoles 16 marzo 2022

Precio : 100USD

WALKSON can provide forged shafts, forged Crankshafts and forged stepped/bubble shafts of carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum, copper, and tool steel conforming to ASTM, AMS, AISI, SAE, and Other industry approved specifications. Forged shafts, as...

Miércoles 16 marzo 2022

Precio : 100USD

WALKSON, as a reliable electric ball valve company, supplies main parts for high temperature ball valves, consisting of Valve Body, ball, stem and sealing ring. Those actuated ball valve components can be made either from castings or forgings. Available material provided by WALKSON...

Miércoles 16 marzo 2022

Precio : 100USD

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Miércoles 16 marzo 2022

Precio : 100USD

Press forging is the general name of forging and stamping. It is a forming process to obtain the required shape and size of the workpiece by using the hammer, anvil block, punch of the forging machine, or by applying pressure on the blank through the die to produce plastic deformation...

Martes 15 marzo 2022

Full-color led linear downlight equipped with a narrow aluminum-profile housing and specially designed by EXC led linear light suppliers for outdoor landscape lighting, and each pixel can realize 65536 grades gray scale changing; featuring simple and reliable installation, they can...

Sábado 12 marzo 2022

Mold temp controller, MTC, mold heater, In a broad sense, called temperature control equipment, oil/water mold heaters. Mold temp controller contains heating and freezing temperature control. it is used to heat up the mould and maintain temperature. Soxi provides a wide range of mold...

Jueves 10 marzo 2022

Aluminium formwork is a construction system for casting the concrete structure of a building. The lightweight aluminium panels and simple installation deliver greater efficiency on the site. Otalum's aluminium column and shuttering formworks are suited for many different types of structures...

Jueves 10 marzo 2022

Otalum is one of the leading aluminium window extrusions suppliers of customed aluminium profile products in Southeast-China, Australia, South America and Southeast-Asia, offering a wide range of production capacities in aluminium extrusions, finishing and fabrication. Aluminium is...

Jueves 10 marzo 2022

METAL CASTING PRODUCTS HQ accumulated years of experience in Metal casting products and accumulated technical know-how to help customers choose the properest processing methods and materials. METAL CASTING PRODUCTS APPLICATION Metal casting products application SCH13 （JIS） As one...