LEFT - 33658 Anuncios

Jueves 18 marzo 2021

About Galvanized EMT Pipe Specification: 3/4”-6” Raw Material: Q235, S235JR, SS400 Scope of application: Excellent mechanical properties of the threading tube. Excellent corrosion resistance, high pressure resistance of the threading pipe and working pressure exceeding 2.5Mpa. The...

Jueves 18 marzo 2021

JIS G3444 is a Japanese standard. This standard applies to civil engineering, construction, building, iron towers, scaffolding, pillars, landslide steel piles and other General structural carbon steel . Hebei Tianchuang Pipe Co., Ltd. is a professional road guard rails suppliers...

Jueves 18 marzo 2021

Fire fighting pipe is a kind of normal carbon steel pipe for conveying water, gas and other fire suppression agents. It's usually in red. But the exterior of the light-wall is galvanized silvery. The installation of a red steel pipe is only to be used as a wet sprinkler system. Dry...

Jueves 18 marzo 2021

ERW pipe means electric resistance welded pipe, and it is a resistance welding by 10-500 kHz of high-frequency current. The raw material of the ERW steel pipe is hot rolled steel coil made of steel billet, and the usual material is Q195, Q215, Q235, Q355 in China ERW pipe grade, which...

Jueves 18 marzo 2021

EN 10255 Steel Pipe China's commonly used EU steel pipe standards are EN10219, EN10220, EN10240, EN10255 and so on. Quality certificate EN10204 DIN50049, Tianchuang Steel Tube Co., Ltd. can produce all kinds of welded steel , hot-dip galvanized steel , etc. according to the above standards...

Miércoles 17 marzo 2021

Precio : 100USD

Sunflower Solar Warning Flashing Light Features and Advantages Solar cell powered - not dependent on the electrical grid Automatically starts flashing at night (charging during the day) Battery backup - able to operate in cloudy/rainy weather Optimal designed poly-carbonate optical...

Miércoles 17 marzo 2021

Precio : 100USD

Overview The ST-PTS-M11 DC1-A uses advanced GFSK 490MHz communication to phase and monitor signals in different directions to avoid confiicts or failures . Both models offer multiple options to provide safe and efficient traffic control for a variety of short term applications. Features...

Miércoles 17 marzo 2021

Precio : 100USD

Features and Advantages Fixed time mode: vehicle flow in peak time Pedestrian requirements mode: vehicle flow in off­ peak time(day time) Yellow flashing mode: vehicle flow in off-peak time (middle night period) Switch off mode: vehicle flow in off-peak time(earlier morning period)...

Miércoles 17 marzo 2021

Cantidad : 200000 - Precio : USD3-50

Acrylic Makeup Organizer Perfume Display Rack Cosmetic Advertising LED Display Stand 7454 product description Product neme LED Cosmetic Display Stand Product description Acrylic LED lamp box modeling to display perfume, left can be placed in the light box advertising film,...

Martes 16 marzo 2021

Sandy Lin Email: unity@mvme.cn Skype: onlywnn_1 Mob/Whatsapp : +86 18020776786 Wechat : mooreplc website : www.salesplc.com BENEFITS: (I WILL GIVE YOU A REPLY IMMEDIATELY) Quantity available: 1 The colour：NEW Warranty: 12 months. Lead time: 1-2 working days. Terms of payment: Paypal、T/T...

Martes 16 marzo 2021

Sandy Lin Email: unity@mvme.cn Skype: onlywnn_1 Mob/Whatsapp : +86 18020776786 Wechat : mooreplc website : www.salesplc.com BENEFITS: (I WILL GIVE YOU A REPLY IMMEDIATELY) Quantity available: 1 The colour：NEW Warranty: 12 months. Lead time: 1-2 working days. Terms of payment: Paypal、T/T...

Sábado 13 marzo 2021

This powerful neodymium disc magnet measures 3/8" in diameter, 1/8" in thickness, with the pull force of 5.46 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Sábado 13 marzo 2021

Industrial Magnet 1 inch x1/4 inch x1/8 inch Magnetic Plate Thin Magnets Bar This powerful neodymium block magnet measures 1" in length, 1/4" in width, and 1/2" in thickness, with the pull force of 18.71 lb vertically. It is made from an alloy of neodymium, iron and boron, plated...

Sábado 13 marzo 2021

Custom Round Car Magnets 3/4 inch x 3/4 inch N52 Super Strong Magnet For Sale This powerful neodymium disc magnet measures 3/4" in diameter, 3/4" in thickness, with the pull force of 37.86 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers...

Sábado 13 marzo 2021

This powerful neodymium block magnet measures 1" in length, 1/2" in width, and 1/4" in thickness, with the pull force of 20.37 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Sábado 13 marzo 2021

This powerful neodymium block magnets measures 2/3" in length, 1/2"in width, and 1/4" in thickness, with the pull force of 15.95 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Sábado 13 marzo 2021

This powerful neodymium block magnet measures 3/4" in length, 1/4" in width, and 1/4" in thickness, with the pull force of 10.51 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Sábado 13 marzo 2021

Strong Round Magnet N42 3/8 inch x1/2 inch Disc Magnet Flat Magnets This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Sábado 13 marzo 2021

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 10.52 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Sábado 13 marzo 2021

Circle Magnet N52 Magnet 1/2 inch x1/16 inch Round Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel...

Sábado 13 marzo 2021

Round Magnet N42 1/2 inch x1/16 inch Industrial Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Sábado 13 marzo 2021

Description of Three Motor Automatic Height Adjustable Standing Desk With Three Legs: We can call three Motors Electric Height Adjustable Standing Desk With Three Legs a different name, such as the L-shaped desk or the corner desk. We are very focused on design, quality and functionality...

Sábado 13 marzo 2021

Description of Sit Stand Desk Converter： Sit stand desk converter can turn your desk into a healthy workstation in a few minutes. Independent sit-up workstation supports single, double, three, or four panel displays and function button height adjustment. This Workstation- energize your body...

Sábado 13 marzo 2021

Description of One Motor Two Leg Electric Height Adjustable Standing Desk Frame： With our Electric Height Adjustable Standing in the market promotion of increasingly mature, people are familiar with the magic effect of our products. Not only good for your health, but it also gives you energy...

Sábado 13 marzo 2021

(Releasing-spears).jpg In Drilling and word over operation LM-T type casing spear is a tool mainly used for fishing of drill pipe oil pipe and casing from fish hole, It can be used with internal cutter bumper jar etc. Dezhou Rundong Petroleum Machinery Co., Ltd is a professional integrated...

Sábado 13 marzo 2021

Fig 602 Hammer Union Working Pressure: 6,000psi(414 bar) Features: Compact Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal seal,and minimizes flow turbulence Butt-weld available Available for sour gas service: 6,000 psi (414 bar)cold working pressure...

Sábado 13 marzo 2021

Fig 600 Hammer Union fig-600.jpg Working Pressure: 6,000psi(414 bar) Features: Bronze seat provides primary seal;will not rust in water services Recommended Service: Steam service, boiler connections, manifold, and line connections for production, drilling, and well servicing...

Sábado 13 marzo 2021

Fig 400 Hammer Union Working Pressure: 4,000psi(276 bar)through 4-inch sizes; 2,500psi(172 bar)through 5 to 12-inch sizes Features: 21/2-through 12-inch sizes have O-rings for primary seal Butt-weld available Available for sour gas service: 2,500 psi suction, (172 bar) cold working pressure...

Sábado 13 marzo 2021

Fig 2202 Hammer Union fig-2202.jpg Working Pressure: 15,000 psi(1034 bar) Features: Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E Heat-treated components are 100% tested for hardness Fluoroelastomer seal rings Butt-weld...

Sábado 13 marzo 2021

Fig 207 Hammer Union fig-207.jpg Working Pressure: 2,000 psi(138 bar) Features: Parts are interchangeable with Figs.200 and 206 O-ring on blanking cap ensures a leak-free seal Raised lugs on cap allow for make-up with a hammer Cap can be tapped for pressure gauge if specified Available...